Setup70b_ESP32_S3_ILI9341.h

// Setup for the ESP32 S3 with ILI9341 display
// Note SPI DMA with ESP32 S3 is not currently supported
#define USER_SETUP_ID 70
// See SetupX_Template.h for all options available
#define ILI9341_DRIVER

                    // Typical board default pins - change to match your board
#define TFT_CS   34 //     10 or 34 (FSPI CS0) 
#define TFT_MOSI 35 //     11 or 35 (FSPI D)
#define TFT_SCLK 36 //     12 or 36 (FSPI CLK)
#define TFT_MISO 37 //     13 or 37 (FSPI Q)

// Use pins in range 0-31
#define TFT_DC    7
#define TFT_RST   6

//#define TOUCH_CS 16 // Optional for touch screen

#define LOAD_GLCD
#define LOAD_FONT2
#define LOAD_FONT4
#define LOAD_FONT6
#define LOAD_FONT7
#define LOAD_FONT8
#define LOAD_GFXFF

#define SMOOTH_FONT

// FSPI (or VSPI) port (SPI2) used unless following defined. HSPI port is (SPI3) on S3.
//#define USE_HSPI_PORT

//#define SPI_FREQUENCY  27000000
#define SPI_FREQUENCY  40000000   // Maximum for ILI9341

#define SPI_READ_FREQUENCY  6000000 // 6 MHz is the maximum SPI read speed for the ST7789V

#define SPI_TOUCH_FREQUENCY 2500000