Skip to content

Latest commit

 

History

History
127 lines (104 loc) · 5.92 KB

vanilla_msysgit_workflow.md

File metadata and controls

127 lines (104 loc) · 5.92 KB

Vanilla msysgit workflow

This describes how you can use msysgit on Windows to work on the Chromium git repository, without setting up Cygwin or hacking the git cl, git try and other scripts to work under a regular Windows shell.

The basic setup is to set up a regular git checkout on a Linux (or Mac) box, and use this exclusively to create your branches and run tools such as git cl, and have your Windows box treat this git repository as its upstream.

The advantage is, you get a pretty clean setup on your Windows box that is unlikely to break when the various custom git tools like git cl change. The setup is also advantageous if you regularly build code on Windows and then want to test it on Linux, since all you need to test on your Linux box is a git push from Windows followed by building and testing under Linux.

The disadvantage is that it adds an extra layer between the Chromium git repo and your Windows checkout. In my experience (joi@chromium.org) this does not actually slow you down much, if at all.

The most frequently used alternative to this workflow on Windows seems to be using Cygwin and creating a checkout directly according to the instructions at UsingGit. The advantage of that approach is you lose the extra overhead, the disadvantage seems to be mostly speed and having to run a Cygwin shell rather than just a normal Windows cmd.

Please note that the instructions below are mostly from memory so they may be slightly incorrect and steps may be missing. Please feel free to update the page with corrections and additions based on your experience.

Details

Create your checkouts:

  1. Create a git checkout on your Linux box, with read/write abilities, as per UsingGit. The rest of these instructions assume it is located at /home/username/chrome
  2. Install msysgit on your Windows box.

Starting a new topic branch:

  1. Linux: git branch mytopic (or you may want to use e.g. the LKGR script from UsingGit).
  2. Windows: git fetch then git checkout mytopic

Normal workflow on Windows:

  1. ...edit/add some files...
  2. git commit -a -m "my awesome change"
  3. ...edit more...
  4. git commit -a -m "follow-up awesomeness"
  5. git push

Normal workflow on Linux:

  • (after git push from windows): git cl upload && git try
  • (after LGTM and successful try): git cl commit (but note the tot-mytopic trick in the pipelining section below)

Avoiding excessive file changes (to limit amount of Visual Studio rebuilds when switching between branches):

  • Base all your different topic branches off of the same base branch; I generally create a new LKGR branch once every 2-3 working days and then git merge it to all of my topic branches.
  • To track which base branch topic branches are based off, you can use a naming convention; I use e.g. lk0426 for an LKGR branch created April 26th, then use e.g. lk0426-topic1, lk0426-topic2 for the topic branches that have all changes merged from lk0426. I (joi@chromium.org) also have a script to update the base branch for topic branches and rename them - let me know if interested.
  • Now that all your branch names are prefixed with the base revision (whether you use my naming convention or not), you can know before hand when you switch between branches on Windows whether you should expect a major rebuild, or a minor rebuild. If you are able to remember which of your topic branches have .gyp changes and which don't (or I guess you could use git diff to figure this out), then you will also have a good idea whether you need to run gclient runhooks or not when you switch branches. Another nice thing is that yu should never have to run gclient sync when you switch between branches with the same base revision, unless some of your branches have changes to DEPS files.

Pipelining:

  1. Linux:
    1. git checkout lk0426-mytopic
    2. git checkout -b lk0426-mytopic-nextstep
  2. Windows:
    1. git fetch && git checkout lk0426-mytopic-nextstep
    2. ...work as usual...
    3. git push
  3. Later, on Linux:
    1. make_new_lkgr_branch lk0428
    2. git merge lk0428 lk0426-mytopic
    3. git branch -m lk0426-mytopic lk0428-mytopic (to rename)
    4. git merge lk0428-mytopic lk0426-mytopic-nextstep
    5. git branch -m lk0428-mytopic-nextstep lk0428-mytopic-nextstep (to rename)
  4. Later, when you want to commit one of the earlier changes in the pipeline; all on Linux. The reason you may want to create the separate tip-of-tree branch is in case the try bots show your change failing on tip-of-tree and you need to do significant additional work, this avoids having to roll back the tip-of-tree merge:

Janitorial work on Windows:

  • When you rename branches on the Linux side, the Windows repo will not know automatically; so if you already had a branch lk0426-mytopic open on Windows and then git fetch, you will still have lk0426-mytopic even if that was renamed on the Linux side to lk0428-mytopic.
  • Dealing with this is straight-forward; you just git checkout lk0428-mytopic to switch to the renamed (and likely updated) branch. Then git branch -d lk0426-mytopic to get rid of the tracking branch for the older name. Then, occasionally, git remotes prune origin to prune remote tracking branches (you don't normally see these listed unless you do git branch -a).

Gotchas:

  • You should normally create your branches on Linux only, so that the Windows repo gets tracking branches for them. Any branches you create in the Windows repo would be local to that repository, and so will be non-trivial to push to Linux.
  • git push from Windows will fail if your Linux repo is checked out to the same branch. It is easy to switch back manually, but I also have a script I call safepush that switches the Linux-side branch for you before pushing; let me (joi@chromium.org) know if interested.