Skip to content

Latest commit

 

History

History
259 lines (227 loc) · 9.3 KB

writing_gn_templates.md

File metadata and controls

259 lines (227 loc) · 9.3 KB

Writing GN Templates

GN and Ninja are documented here:

[TOC]

Things to Consider When Writing Templates

Inputs and Depfiles

  • List all files read (or executed) by an action as inputs.
    • It is not enough to have inputs listed by dependent targets. They must be listed directly by targets that use them.
    • Non-system Python imports are inputs! For scripts that import such modules, use action_with_pydeps to ensure all dependent Python files are captured as inputs.
  • For action inputs that are not computable during "gn gen", actions can write depfiles (.d files) to add additional input files as dependencies for subsequent builds. They are relevant only for incremental builds.
    • Depfiles should not list files that GN already lists as inputs.
      • Besides being redundant, listing them also makes it harder to remove inputs, since removing them from GN does not immediately remove them from depfiles.
      • Stale paths in depfiles can cause ninja to complain of circular dependencies in some cases.

Ensuring "gn analyze" Knows About your Inputs

"gn analyze" is used by bots to run only affected tests and build only affected targets. Try it out locally via:

echo "compute_inputs_for_analyze = true" >> out/Debug/args.gn
gn analyze //out/Debug <(echo '{
    "files": ["//BUILD.gn"],
    "test_targets": ["//base"],
    "additional_compile_targets":[]}') result.txt; cat result.txt
  • For analyze to work properly, GN must know about all inputs.
  • Inputs added by depfiles are not available to "gn analyze".
    • When paths listed in a target's depfile are listed as inputs to a dependent target, analyze will be correct.
      • Example: An AndroidManifest.xml file is an input to an android_library() and is included in an android_apk()'s depfile. gn analyze will know that a change to the file will require the APK to be rebuilt, because the file is marked as an input to the library, and the library is a dep of the APK.
    • When paths listed in a target's depfile are not listed as inputs to a dependent target, a few options exist:
      • Rather than putting the inputs in a depfile, force users of your template to list them, and then have your action re-compute them and assert that they were correct.
        • jinja_template() does this.
      • Rather than putting the inputs in a depfile, compute them beforehand and save them to a text file. Have your template Use read_file() to read them in.
        • action_with_pydeps() does this.
      • Continue using a depfile, but use an exec_script() to compute them when compute_inputs_for_analyze is set.
        • grit() does this.

Outputs

What to List as Outputs

Do not list files as outputs unless they are important. Outputs are important if they are:

  • used as an input by another target, or
  • are roots in the dependency graph (e.g. binaries, apks, etc).

Example:

  • An action runs a binary that creates an output as well as a log file. Do not list the log file as an output.

Where to Place Outputs

Option 1: To make outputs visible in codesearch (e.g. generated sources):

  • use $target_gen_dir/$target_name.$EXTENSION.

Option 2: Otherwise (for binary files):

  • use $target_out_dir/$target_name.$EXTENSION.

Option 3: For outputs that are required at runtime (e.g. runtime_deps), options 1 & 2 do not work because they are not archived in builder/tester bot configurations. In this case:

  • use $root_out_dir/gen.runtime or $root_out_dir/obj.runtime.

Example:

# This .json file is used at runtime and thus cannot go in target_gen_dir.
_target_dir_name = rebase_path(get_label_info(":$target_name", "dir"), "//")
_output_path = "$root_out_dir/gen.runtime/$_target_dir_name/$target_name.json"

Option 4: For outputs that map 1:1 with executables, and whose paths cannot be derived at runtime:

  • use $root_build_dir/YOUR_NAME_HERE/$target_name.

Examples:

# Wrapper scripts for apks:
_output_path = "$root_build_dir/bin/$target_name"
# Metadata for apks. Used by binary size tools.
_output_path = "$root_build_dir/size-info/${invoker.name}.apk.jar.info"

Best Practices for Python Actions

Outputs should be atomic and take advantage of restat=1.

  • Make outputs atomic by writing to temporary files and then moving them to their final location.
    • Rationale: An interrupted write can leave a file with an updated timestamp and corrupt contents. Ninja looks only at timestamps.
  • Do not overwrite an existing output with identical contents.
    • Rationale: restat=1 is a ninja feature enabled for all actions that short-circuits a build when output timestamps do not change. This feature is the reason that the total number of build steps sometimes decreases when building..
  • Use build_utils.AtomicOutput() to perform both of these techniques.

Actions should be deterministic in order to avoid hard-to-reproduce bugs. Given identical inputs, they should produce byte-for-byte identical outputs.

  • Some common mistakes:
    • Depending on filesystem iteration order.
    • Writing timestamps in files (or in zip entries).
    • Writing absolute paths in outputs.

Style Guide

Chromium GN files follow GN's Style Guide with a few additions.

Action Granularity

  • Prefer writing new Python scripts that do what you want over composing multiple separate actions within a template.
    • Fewer targets makes for a simpler build graph.
    • GN logic and build logic winds up much simpler.

Bad:

template("generate_zipped_sources") {
  generate_files("${target_name}__gen") {
    ...
    outputs = [ "$target_gen_dir/$target_name.temp" ]
  }
  zip(target_name) {
    deps = [ ":${target_name}__gen" ]
    inputs = [ "$target_gen_dir/$target_name.temp" ]
    outputs = [ invoker.output_zip ]
  }
}

Good:

template("generate_zipped_sources") {
  action(target_name) {
    script = "generate_and_zip.py"
    ...
    outputs = [ invoker.output_zip ]
  }
}

Naming for Intermediate Targets

Targets that are not relevant to users of your template should be named as: ${target_name}__$something.

Example:

template("my_template") {
  action("${target_name}__helper") {
    ...
  }
  action(target_name) {
    deps = [ ":${target_name}__helper" ]
    ...
  }
}

Variables

Prefix variables within templates and targets with an underscore. For example:

template("example") {
  _outer_sources = invoker.extra_sources

  source_set(target_name) {
    _inner_sources = invoker.sources
    sources = _outer_sources + _inner_sources
  }
}

This convention conveys that sources is relevant to source_set, while _outer_sources and _inner_sources are not.

Passing Arguments to Targets

Pass arguments to targets by assigning them directly within target definitions.

When a GN template goes to resolve invoker.FOO, GN will look in all enclosing scopes of the target's definition. It is hard to figure out where invoker.FOO is coming from when it is not assigned directly within the target definition.

Bad:

template("hello") {
  script = "..."
  action(target_name) {
    # This action will see "script" from the enclosing scope.
  }
}

Good:

template("hello") {
  action(target_name) {
    script = "..."  # This is equivalent, but much more clear.
  }
}

Exception: testonly and visibility can be set in the outer scope so that they are implicitly passed to all targets within a template.

This is okay:

template("hello") {
  testonly = true  # Applies to all nested targets.
  action(target_name) {
    script = "..."
  }
}

Using forward_variables_from()

Using forward_variables_from() is encouraged, but testonly and visibility should always be listed explicitly in case they are assigned in an enclosing scope (applies to the "*" variant of forward_variables_from()). See this bug for more context.

template("action_wrapper") {
  action(target_name) {
    forward_variables_from(invoker, "*", [ "testonly", "visibility" ])
    forward_variables_from(invoker, [ "testonly", "visibility" ])
    ...
  }
}

Useful Ninja Flags

Useful ninja flags when developing build rules:

  • ninja -v - log the full command-line of every target.
  • ninja -v -n - log the full command-line of every target without having to wait for a build.
  • ninja -w dupbuild=err - fail if multiple targets have the same output.
  • ninja -d keeprsp - prevent ninja from deleting response files.
  • ninja -n -d explain - print why ninja thinks a target is dirty.
  • ninja -j1 - execute only one command at a time.