GAME BOY Live Camera MALVEKE

MALVEKE Prototype V2.3

gbcam.-.SD.480p.mov

Introduction

Official	Unleashed	RogueMaster	Xtreme

Installation Directions

This project is intended to be overlayed on top of an existing firmware repo, in my case the Release 0.79.1 version.

• Clone the Flipper Zero firmware repository. Refer to this tutorial for updating the firmware.
• Copy the "malveke_gb_live_camera" folder into the /applications_user/malveke_gb_live_camera folder in your firmware.
• Run the command ufbt launch to run it on your Flipper Zero.

./ufbt launch

• NOTE: If you only want to generate the fap file, you must run the following command.

./ufbt 

And use qFlipper to copy the generated malveke_gb_live_camera.fap file to the SD Card/apps/GPIO folder.

Instructions for use.

These instructions assume that you are starting at the Flipper Zero desktop. Otherwise, press the Back button until you are at the desktop.

• Press the OK button on the Flipper to open the main menu.

• Choose Applications from the menu.

• Choose GPIO from the submenu.

• Choose GAME BOY Live Camera MALVEKE

• The Flipper Zero will show the loading screen of the application.

  
  
  

• If the MALVEKE board and the GAME BOY Camera cartridge are connected, an image will be displayed.

  
  
  

• Press the LEFT/RIGHT buttons to change the exposure value.

• Press the OK button to take a picture. The image will be saved in the SD Card/apps_data/malveke/photos folder.

TODO

• Add automatic exposure calculation.
• Refactor Code

Acknowledgements

• @AntonioND for his documentation on reverse engineering the Game Boy Camera and for his assistance in understanding some aspects.
• @eried for his implementation of ESP32-Camera (This is based on it.)
• @furrtek for his projects GBCameraProjects

From Talcahuano 🇨🇱 with ❤