-
Notifications
You must be signed in to change notification settings - Fork 204
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
InstallAUISuite fails #43
Comments
The most recent version of voicecommand has been compiled for ARMv7 (Pi 2). To get it to run on the B+ (ARMv6):
|
@alecgibson with the changes you suggested I got further. Sadly I now have another issue. I get to this:
But nope, no output. |
It also says: You have a formatting error on line 35 of your config file. I'm ignoring that line //edit: runnign voicecommand now actually does something: osmc@osmc:~$ voicecommand
But I don't hear no "Yes Sir?". And it ain't seem to recognize any commands. // update: I ran |
I'll make this a new issue |
Anything on this? I can't hear anything when I run voicecommand -s (working on Pi 2) |
I'm in the same boat as bruno1308 - Pi2, wheezy image, can't hear anything during the voicecommand setup, but audio plays fine with aplay and speaker-test. |
Same problem here, i can't hear anything 👎 |
Same problem here. speaker-test and aplay work fine. Hear nothing during setup. Pi2 jessie |
Anything new on this? |
So, the reason (for those following) for not hearing anything, is because Google blocked connecting to it for TTS. Someone, however, cleverly created a wrapper that allows audio to play, though it requires installing Pico2Wave. I have gotten it working, but it kept looping "what you say baby", until I changed what alecgibson suggested. After that, I'm getting the out.flac errors (which I think may actually be a step back). To get the audio working, I'm going to reuse the standard install and see if I can't debug what's causing her to mistake the clip for "useless conversation", so to speak, later... |
I've done some digging, and the bug is on line 35 of VoiceCommand/speech-recog.sh I'm looking into seeing if I can make a reasonable replacement using Pico2Wave. |
this is my tts script: string=$@ len=${#string} wget -q -U Mozilla -O "/dev/shm/tmp.mp3" "http://api.voicerss.org/?key=&hl=${lang}&src=$string" |
Warning: Couldn't read data from file "/dev/shm/noise.flac", this makes an |
Warning: Couldn't read data from file "/dev/shm/noise.flac", this makes an |
InstallAUISuite.sh =>
Google didn't help so I thought I'd ask here. Tried to install it on my old raspi B+ running osmc.
The text was updated successfully, but these errors were encountered: