Skip to content

Latest commit

 

History

History
213 lines (157 loc) · 9.26 KB

CONTRIBUTING.md

File metadata and controls

213 lines (157 loc) · 9.26 KB

Contribution Guide

Welcome

This document is the single source of truth for how to contribute to the code base. Feel free to browse the open issues or file a new one, all feedback is welcome! By reading this guide, we hope to give you all of the information you need to be able to pick up issues, contribute new features, and get your work reviewed and merged.

Before contributing code

We welcome code patches, but to make sure things are well coordinated you should discuss any significant change before starting the work. The maintainers ask that you signal your intention to contribute to the project using the issue tracker. If there is an existing issue that you want to work on, please let us know so we can get it assigned to you. If you noticed a bug or want to add a new feature, there are issue templates you can fill out.

When filing a feature request, the maintainers will review the change and give you a decision on whether we are willing to accept the feature into the project. For significantly large and/or complex features, we may request that you write up an architectural decision record (ADR) detailing the change. Please use the template as guidance.

How to Contribute a Patch

Depending on what you are patching depends on how you should go about it. Below are some guides on how to test patches locally as well as develop the controller and runners.

When submitting a PR for a change please provide evidence that your change works as we still need to work on improving the CI of the project. Some resources are provided for helping achieve this, see this guide for details.

Developing the Controller

Rerunning the whole acceptance test suite from scratch on every little change to the controller, the runner, and the chart would be counter-productive.

To make your development cycle faster, use the below command to update deploy and update all the three:

# Let assume we have all other envvars like DOCKER_USER, GITHUB_TOKEN already set,
# The below command will (re)build `actions-runner-controller:controller1` and `actions-runner:runner1`,
# load those into kind nodes, and then rerun kubectl or helm to install/upgrade the controller,
# and finally upgrade the runner deployment to use the new runner image.
#
# As helm 3 and kubectl is unable to recreate a pod when no tag change,
# you either need to bump VERSION and RUNNER_TAG on each run,
# or manually run `kubectl delete pod $POD` on respective pods for changes to actually take effect.

# Makefile
VERSION=controller1 \
  RUNNER_TAG=runner1 \
  make acceptance/pull acceptance/kind docker-build acceptance/load acceptance/deploy

If you've already deployed actions-runner-controller and only want to recreate pods to use the newer image, you can run:

# Makefile
NAME=$DOCKER_USER/actions-runner-controller \
  make docker-build acceptance/load && \
  kubectl -n actions-runner-system delete po $(kubectl -n actions-runner-system get po -ojsonpath={.items[*].metadata.name})

Similarly, if you'd like to recreate runner pods with the newer runner image you can use the runner specific Makefile to build and / or push new runner images

# runner/Makefile
NAME=$DOCKER_USER/actions-runner make \
  -C runner docker-{build,push}-ubuntu && \
  (kubectl get po -ojsonpath={.items[*].metadata.name} | xargs -n1 kubectl delete po)

Developing the Runners

Tests

A set of example pipelines (./acceptance/pipelines) are provided in this repository which you can use to validate your runners are working as expected. When raising a PR please run the relevant suites to prove your change hasn't broken anything.

Running Ginkgo Tests

You can run the integration test suite that is written in Ginkgo with:

make test-with-deps

This will firstly install a few binaries required to setup the integration test environment and then runs go test to start the Ginkgo test.

If you don't want to use make, like when you're running tests from your IDE, install required binaries to /usr/local/kubebuilder/bin. That's the directory in which controller-runtime's envtest framework locates the binaries.

sudo mkdir -p /usr/local/kubebuilder/bin
make kube-apiserver etcd
sudo mv test-assets/{etcd,kube-apiserver} /usr/local/kubebuilder/bin/
go test -v -run TestAPIs github.com/actions-runner-controller/actions-runner-controller/controllers

To run Ginkgo tests selectively, set the pattern of target test names to GINKGO_FOCUS. All the Ginkgo test that matches GINKGO_FOCUS will be run.

GINKGO_FOCUS='[It] should create a new Runner resource from the specified template, add a another Runner on replicas increased, and removes all the replicas when set to 0' \
  go test -v -run TestAPIs github.com/actions-runner-controller/actions-runner-controller/controllers

Running End to End Tests

Notes for Ubuntu 20.04+ users

If you're using Ubuntu 20.04 or greater, you might have installed docker with snap.

If you want to stick with snap-provided docker, do not forget to set TMPDIR to somewhere under $HOME. Otherwise kind load docker-image fail while running docker save. See https://kind.sigs.k8s.io/docs/user/known-issues/#docker-installed-with-snap for more information.

To test your local changes against both PAT and App based authentication please run the acceptance make target with the authentication configuration details provided:

# This sets `VERSION` envvar to some appropriate value
. hack/make-env.sh

DOCKER_USER=*** \
  GITHUB_TOKEN=*** \
  APP_ID=*** \
  PRIVATE_KEY_FILE_PATH=path/to/pem/file \
  INSTALLATION_ID=*** \
  make acceptance

Rerunning a failed test

When one of tests run by make acceptance failed, you'd probably like to rerun only the failed one.

It can be done by make acceptance/run and by setting the combination of ACCEPTANCE_TEST_DEPLOYMENT_TOOL=helm|kubectl and ACCEPTANCE_TEST_SECRET_TYPE=token|app values that failed (note, you just need to set the corresponding authentication configuration in this circumstance)

In the example below, we rerun the test for the combination ACCEPTANCE_TEST_DEPLOYMENT_TOOL=helm ACCEPTANCE_TEST_SECRET_TYPE=token only:

DOCKER_USER=*** \
  GITHUB_TOKEN=*** \
  ACCEPTANCE_TEST_DEPLOYMENT_TOOL=helm \
  ACCEPTANCE_TEST_SECRET_TYPE=token \
  make acceptance/run

Testing in a non-kind cluster

If you prefer to test in a non-kind cluster, you can instead run:

KUBECONFIG=path/to/kubeconfig \
  DOCKER_USER=*** \
  GITHUB_TOKEN=*** \
  APP_ID=*** \
  PRIVATE_KEY_FILE_PATH=path/to/pem/file \
  INSTALLATION_ID=*** \
  ACCEPTANCE_TEST_SECRET_TYPE=token \
  make docker-build acceptance/setup \
       acceptance/deploy \
       acceptance/tests

Code conventions

Before shipping your PR, please check the following items to make sure CI passes.

  • Run go mod tidy if you made changes to dependencies.
  • Format the code using gofmt
  • Run the golangci-lint tool locally.
    • We recommend you use make lint to run the tool using a Docker container matching the CI version.

Opening the Pull Request

Send PR, add issue number to description

Helm Version Changes

In general we ask you not to bump the version in your PR. The maintainers will manage releases and publishing new charts.

Testing Controller Built from a Pull Request

We always appreciate your help in testing open pull requests by deploying custom builds of actions-runner-controller onto your own environment, so that we are extra sure we didn't break anything.

It is especially true when the pull request is about GitHub Enterprise, both GHEC and GHES, as maintainers don't have GitHub Enterprise environments for testing.

The process would look like the below:

  • Clone this repository locally
  • Checkout the branch. If you use the gh command, run gh pr checkout $PR_NUMBER
  • Run NAME=$DOCKER_USER/actions-runner-controller VERSION=canary make docker-build docker-push for a custom container image build
  • Update your actions-runner-controller's controller-manager deployment to use the new image, $DOCKER_USER/actions-runner-controller:canary

Please also note that you need to replace $DOCKER_USER with your own DockerHub account name.