-
Notifications
You must be signed in to change notification settings - Fork 501
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Ikea Tradfri Firmware 2.3.x E17 not usable with deconz #2518
Comments
I have the white spectrum bulbs. |
@Lemocin Thanks for your contribution. We need to get more attention here. @tubalainen @ebaauw @djwlindenaar @manup |
There is a bug in most/all (?) versions of the firmware of most/all (?) IKEA Trådfri lights, that it won't accept new commands while it's still executing a transition. So e.g. a PUT of This seems to be a similar firmware bug. What |
I am planning to add smoke detectors to my home and I found that all of the ones that I am willing to buy (based on functionality and reliability) all working so-so in deconz (some with issues more than 2-3 years old). Lets hope that we soon can get the FW and Deconz issues with mesh routing sorted so I personally dont have to "pull the trigger" and move away from this otherwise fantastic software! |
@ebaauw
Version 1.2.x - scene will be recalled. Regardless the transition time of 3-10 seconds, you can recall another scene while in active transition, or turn lights off. Commands will be executed. Version 2.3.x - scene will be recalled. Regardless of the transition time (in active transition or after transition) you have to wait a couple of seconds more that deconz can handle lights again or they respond. around 10-15 seconds. If you try to recall a scene before that timeframe or turn off the lights some respond others not and the group seems to be frozen for some more time. |
@realwax is this still a issue? |
@Mimiix Currently I can't tell as I had my bulbs flashed to 1.2.x for smooth operation. I am currently trying to test again. I start flashing my E14s to 117C-2201-23050631.zigbee which is version 2.3.050. I will come back with my usability experience in 2-3 days as flashing takes some time and manual control is required.... |
Update - it seems like improvements are working...! |
Sounds good! |
@Mimiix As you have confirmed the OTAU bug recently, you can imagine flashing takes some time and need plenty restarts. This is closed and it will continue here #1261 Thank you for your support and work! |
additional note: (Can't really state on which side the issues have been mitigated. Guess on both) Release Version: 1.12.1 |
@Mimiix One issue is still left - find it here dresden-elektronik/phoscon-app-beta#52 (it is api related not phoscon gui) you can reproduce it with simple api calls. |
Can you create a new issue for that? |
sure! Here we go #2892 |
The experience with a mesh of 20 Tradfri E14 bulbs upgraded to 2.3.x firmware is bad.
Issues:
Soft on does not work - bulb start with given bri instead of fading in.
Recalling a deconz scenes freezes deconz. Meaning that switching on/off or sending another scene recall commands in that group is frozen 10 to 15 seconds before able to send another scene recall or switch off. (during that time - command are whether ignored or accepted only from some bulbs)
Lights start blinking and does not react until power cycle (unknown if firmware issue or deconz reaction.) bulb does not respond.
Though there some improvements in terms of usability it not recommended from my experience.
Please use this thread as discussion. Maybe deconz can be improved, maybe simple do not go to fw 2.x on your bulbs.
With a downgrade to 1. 2.x on e14 everything is fine and tradfri operation was improved in this issue #1261
The text was updated successfully, but these errors were encountered: