diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.txt b/Documentation/devicetree/bindings/net/ti,dp83867.txt index 5d21141a68b547..85bf945b898f0d 100644 --- a/Documentation/devicetree/bindings/net/ti,dp83867.txt +++ b/Documentation/devicetree/bindings/net/ti,dp83867.txt @@ -9,6 +9,18 @@ Required properties: - ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h for applicable values +Optional property: + - ti,min-output-impedance - MAC Interface Impedance control to set + the programmable output impedance to + minimum value (35 ohms). + - ti,max-output-impedance - MAC Interface Impedance control to set + the programmable output impedance to + maximum value (70 ohms). + +Note: ti,min-output-impedance and ti,max-output-impedance are mutually + exclusive. When both properties are present ti,max-output-impedance + takes precedence. + Default child nodes are standard Ethernet PHY device nodes as described in Documentation/devicetree/bindings/net/phy.txt diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts index 064b322a7a042e..3b23b32e1b307b 100644 --- a/arch/arm/boot/dts/dra72-evm-revc.dts +++ b/arch/arm/boot/dts/dra72-evm-revc.dts @@ -59,15 +59,17 @@ &davinci_mdio { dp83867_0: ethernet-phy@2 { reg = <2>; - ti,rx-internal-delay = ; - ti,tx-internal-delay = ; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; ti,fifo-depth = ; + ti,min-output-impedance; }; dp83867_1: ethernet-phy@3 { reg = <3>; - ti,rx-internal-delay = ; - ti,tx-internal-delay = ; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; ti,fifo-depth = ; + ti,min-output-imepdance; }; }; diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c index 91177a4a32ad21..1b639242f9e231 100644 --- a/drivers/net/phy/dp83867.c +++ b/drivers/net/phy/dp83867.c @@ -33,6 +33,7 @@ /* Extended Registers */ #define DP83867_RGMIICTL 0x0032 #define DP83867_RGMIIDCTL 0x0086 +#define DP83867_IO_MUX_CFG 0x0170 #define DP83867_SW_RESET BIT(15) #define DP83867_SW_RESTART BIT(14) @@ -62,10 +63,17 @@ /* RGMIIDCTL bits */ #define DP83867_RGMII_TX_CLK_DELAY_SHIFT 4 +/* IO_MUX_CFG bits */ +#define DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL 0x1f + +#define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX 0x0 +#define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN 0x1f + struct dp83867_private { int rx_id_delay; int tx_id_delay; int fifo_depth; + int io_impedance; }; static int dp83867_ack_interrupt(struct phy_device *phydev) @@ -111,6 +119,14 @@ static int dp83867_of_init(struct phy_device *phydev) if (!of_node) return -ENODEV; + dp83867->io_impedance = -EINVAL; + + /* Optional configuration */ + if (of_property_read_bool(of_node, "ti,max-output-impedance")) + dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX; + else if (of_property_read_bool(of_node, "ti,min-output-impedance")) + dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN; + ret = of_property_read_u32(of_node, "ti,rx-internal-delay", &dp83867->rx_id_delay); if (ret) @@ -184,6 +200,18 @@ static int dp83867_config_init(struct phy_device *phydev) phy_write_mmd_indirect(phydev, DP83867_RGMIIDCTL, DP83867_DEVADDR, delay); + + if (dp83867->io_impedance >= 0) { + val = phy_read_mmd_indirect(phydev, DP83867_IO_MUX_CFG, + DP83867_DEVADDR); + + val &= ~DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL; + val |= dp83867->io_impedance & + DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL; + + phy_write_mmd_indirect(phydev, DP83867_IO_MUX_CFG, + DP83867_DEVADDR, val); + } } return 0;