open software and open hardware platform for developing an alternative crank based powermeter using ANT+ protocol and Arduino Nano which was started at a local Hackathon in March 2019. All source code, required libraries, design files and wiring instructions will be uploaded here.
Obtain the ANT+ Public Network Key from https://www.thisisant.com/developer/ant-plus/ant-plus-basics/network-keys by first becoming an Adopter
- ANT+ module (nrfap2 breakout) - USD 21.58
- Adafruit VERTER - USD 9.95
- 800 mAh 3.7V battery - USD 2.24
- BONUS: Adafruit 10DOF IMU - USD 29.95
- Load Cell Amp (hx711) breakout - USD 1.15
- Charge regulator - USD 0.37
- Strain Gauges - USD 3.42
- (Chinese) Arduino Nano - USD 2.10 <- remember the driver and old bootloader
- Loctite 496 - EUR 18
- 150, 230, 300, 400 grit sandpaper
- 250g 1.75mm Makerbot filament - USD 11.99
- 2 rubber bands
- Bits of 18 Gage wire (copper core)
- http://keithhack.blogspot.com
- www.thisisant.com
- https://jbremnant.wordpress.com/
- rock-o-mat
- Dan Maloney
- chiprobot
- Brian Benchoff
- brodykenrick https://github.com/brodykenrick/ANTPlus_Arduino <- big thanks for mapping out the nrfap2 pins
- http://archive.fabacademy.org/fabacademy2017/fablabbcn/students/141/Final%20Project.html
- Olav Kallhovd
- Kevin Townsend