nanopower

\mainpage Main Page

---

Nano Power click

Nano Power click is a boost (step-up) DC-DC converter click with extremely high efficiency and very low input voltage, aimed at the low power IoT market and battery-powered sensors and other devices.

click Product page

---

Click library

• Author : Petar Suknjaja
• Date : Dec 2019.
• Type : GPIO type

Software Support

We provide a library for the NanoPower Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

This library contains API for NanoPower Click driver.

Standard key functions :

• Config Object Initialization function.

void nanopower_cfg_setup ( nanopower_cfg_t *cfg );

• Initialization function.

NANOPOWER_RETVAL nanopower_init ( nanopower_t *ctx, nanopower_cfg_t *cfg );

• Click Default Configuration function.

void nanopower_default_cfg ( nanopower_t *ctx );

Example key functions :

• This function enables and disables the device.

void nanopw_enable_device( nanopower_t *ctx, const uint8_t state )

Examples Description

This example enables the device.

The demo application is composed of two sections :

Application Init

Initializes GPIO driver.

void application_init ( void )
{
    log_cfg_t log_cfg;
    nanopower_cfg_t cfg;

    //  Logger initialization.

    log_cfg.level = LOG_LEVEL_DEBUG;
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info(&logger, "---- Application Init ----");

    //  Click initialization.

    nanopower_cfg_setup( &cfg );
    NANOPOWER_MAP_MIKROBUS( cfg, MIKROBUS_1 );
    nanopower_init( &nanopower, &cfg );
}
  

Application Task

Turns device on for 5 seconds and than turns device off for 10 seconds,then the output voltage starts to fall.

void application_task ( void )
{
    log_printf(&logger,"Device enabled\r\n");
    nanopw_enable_device( &nanopower, NANOPW_ENABLE_DEVICE );
    Delay_ms( 5000 );
    log_printf(&logger,"Device disabled\r\n");
    nanopw_enable_device( &nanopower, NANOPW_DISABLE_DEVICE );
    Delay_ms( 10000 );
}

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.NanoPower

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.

---