From f665da9191991708a3ea91cfe95752f59f66ba94 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?=E6=99=B4=E4=BA=91=E5=AD=A4=E9=AD=82?= <hackkey@qq.com>
Date: Sun, 29 Jan 2023 16:47:24 +0800
Subject: [PATCH] =?UTF-8?q?=E6=96=B0=E5=A2=9Esunlogin=5Fplug.sh=EF=BC=9A?=
 =?UTF-8?q?=E4=B8=80=E9=94=AE=E6=8E=A7=E5=88=B6=E5=90=91=E6=97=A5=E8=91=B5?=
 =?UTF-8?q?=E5=BC=80=E6=9C=BA=E6=8F=92=E5=BA=A7=EF=BC=9A=E5=BC=80=E5=85=B3?=
 =?UTF-8?q?=E7=94=B5=E6=BA=90=E3=80=81=E8=8E=B7=E5=8F=96=E5=8A=9F=E8=80=97?=
 =?UTF-8?q?=E7=AD=89...?=
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

---
 sunlogin_plug.sh | 219 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 219 insertions(+)
 create mode 100755 sunlogin_plug.sh

diff --git a/sunlogin_plug.sh b/sunlogin_plug.sh
new file mode 100755
index 0000000..4a56974
--- /dev/null
+++ b/sunlogin_plug.sh
@@ -0,0 +1,219 @@
+#!/bin/sh
+#一键控制向日葵开机智能插座
+#博客文章介绍：https://www.cnblogs.com/cnhack/p/17073052.html
+
+SCRIPTPATH="$(dirname $0)"
+
+requestTimeOut=3   #请求超时时间（单位：秒）
+
+controlHostURL="http://192.168.1.105:6767"    #发送的主机地址，可抓包获取，也可以指定插座联网的局域网IP地址，端口通常为6767
+controlTime="01270152"    #接收端需要的参数time，可抓包获取
+controlKey="xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"   #接收端需要的参数key，可抓包获取
+
+
+statusUrl="${controlHostURL}/plug?_api=get_plug_status&index=0&time=${controlTime}&key=${controlKey}"
+cntdownUrl="${controlHostURL}/plug?_api=plug_cntdown_get&time=${controlTime}&key=${controlKey}&index=0"
+checkVersionUrl="${controlHostURL}/plug?key=${controlKey}&_api=get_plug_version&time=${controlTime}"
+electricUrl="${controlHostURL}/plug?key=${controlKey}&_api=get_plug_electric&time=${controlTime}"
+powerOnUrl="${controlHostURL}/plug?_api=set_plug_status&index=0&time=${controlTime}&key=${controlKey}&status=1"
+powerOffUrl="${controlHostURL}/plug?_api=set_plug_status&index=0&time=${controlTime}&key=${controlKey}&status=0"
+
+_sendRequest() {
+	local url="$1"
+	local responseData=$(curl -sSf --connect-timeout $requestTimeOut "$url" 2>/dev/null)
+	[ ! -z "$responseData" ] && echo "$responseData" || echo "{}"
+}
+
+#远端返回错误代码时调用（即result!=0）,非请求过程本身的错误
+responseInvolid() {
+	local msg="【失败】：请求失败，请检查key是否已过期！"
+	echo "$msg"
+	cat >>$SCRIPTPATH/sunlogin-error.log<<<"[$(date +'%Y%m%d %H:%M:%S')] ${msg}"
+	#exit 255
+	return 255
+}
+
+appendErrorLog() {
+	local logFile="$SCRIPTPATH/sunlogin-error.log"
+	echo "$*"
+	cat >>$logFile<<<"[$(date +'%Y-%m-%d %H:%M:%S')] appendErrorLog：$*"
+}
+
+getPlugStatus() {
+	local json=$(_sendRequest "$statusUrl")
+	local status=$(echo "$json"|jq -r '.result' 2>/dev/null)
+	if [ -z "$status" -o "$status" = "null" ];then
+		appendErrorLog "【请求错误】：请求的地址无效，请检查被控主机配置是否正确，并确保被控设备已接入网络！"
+		return 99
+	elif [ $status -ne 0 ];then
+		responseInvolid && return
+	fi
+	local plugStatus=$(echo "$json"|jq '.response[]|.status')
+	if [[ "${1,,}" == "--flag" ]];then  #仅返回状态标志：1->开关开启; 2->开关关闭
+		echo "$plugStatus"
+	else  #返回可读的信息提示文本
+		if [ $plugStatus -eq 1 ];then
+			echo "【开启】电源开关处在开启状态！"
+		elif [];then
+			echo "【关闭】电源开关处在关闭状态！"
+		else
+			echo "【错误】开关状态未知！"
+		fi
+	fi
+}
+
+getPlugVersion() {
+	#获取插座固件版本信息
+	local json=$(_sendRequest "$checkVersionUrl")
+	local status=$(echo "$json"|jq -r '.result' 2>/dev/null)
+	if [ -z "$status" -o "$status" = "null" ];then
+		appendErrorLog "【请求错误】：请求的地址无效，请检查被控主机配置是否正确，并确保被控设备已接入网络！"
+		return 99
+	elif [ $status -ne 0 ];then
+		responseInvolid && return
+	fi
+	echo "$json"
+}
+
+getPlugPower() {
+	#获取插座当前的耗电功率！
+	local json=$(_sendRequest "$electricUrl")
+	local status=$(echo "$json"|jq -r '.result' 2>/dev/null)
+	if [ -z "$status" -o "$status" = "null" ];then
+		appendErrorLog "【请求错误】：请求的地址无效，请检查被控主机配置是否正确，并确保被控设备已接入网络！"
+		return 99
+	elif [ $status -ne 0 ];then
+		responseInvolid && return
+	fi
+	if [[ "${1,,}" == "--raw" ]];then  #返回原始JSON数据
+		echo "$json"
+	else  #返回可读的信息提示文本
+		local power=$(echo "$json"|jq -r '.power')    #当前电功率
+		local current=$(echo "$json"|jq -r '.curr')   #当前电流
+		local volume=$(echo "$json"|jq -r '.vol')     #当前电量
+		printf "【耗电】当前电功率：%s W/h，电流：%s mA，电量：%s \n" $(echo "scale=2;$power/1000"|bc) $(echo "scale=2;$current/1000"|bc) $volume
+	fi
+	
+}
+
+getPlugOpenCount() {
+	#获取插座今日开启次数
+	#注：此接口功能待定（暂时不知道是干嘛用的...）
+	local json=$(_sendRequest "$cntdownUrl")
+	local status=$(echo "$json"|jq -r '.result' 2>/dev/null)
+	if [ -z "$status" -o "$status" = "null" ];then
+		appendErrorLog "【请求错误】：请求的地址无效，请检查被控主机配置是否正确，并确保被控设备已接入网络！"
+		return 99
+	elif [ $status -ne 0 ];then
+		responseInvolid && return
+	fi
+	if [[ "${1,,}" == "--raw" ]];then  #返回原始JSON数据
+		echo "$json"
+	else  #返回可读的信息提示文本
+		#echo "TODO..."
+		echo "$json"
+	fi
+}
+
+getPlugPowerTime() {
+	#获取插座今日通电时长！
+	local url="https://sl-api.oray.com/smartplugs/xxxxxxxxxxxx/electric?date=2023-1-27&r=0.39320349774540664"  #注意此URL可通过抓包网页控制面板获取
+	local json=$(_sendRequest "$url")
+	echo "$json"
+}
+
+powerOnPlug() {
+	#开启插座
+	local json=$(_sendRequest "$powerOnUrl")
+	local status=$(echo "$json"|jq -r '.result' 2>/dev/null)
+	if [ -z "$status" -o "$status" = "null" ];then
+		appendErrorLog "【请求错误】：请求的地址无效，请检查被控主机配置是否正确，并确保被控设备已接入网络！"
+		return 99
+	elif [ $status -ne 0 ];then
+		responseInvolid && return
+	fi
+	if [[ "${1,,}" == "--raw" ]];then  #返回原始JSON数据
+		echo "$json"
+	else  #返回可读的信息提示文本
+		local setStatus=$(echo "$json"|jq -r '.result' 2>/dev/null||echo "1")
+		[ "$setStatus" = "0" ] && echo "【成功】开启插座成功！" || echo "【失败】开启插座失败！"
+	fi
+	
+}
+
+powerOffPlug() {
+	#关闭插座
+	local json=$(_sendRequest "$powerOffUrl")
+	local status=$(echo "$json"|jq -r '.result' 2>/dev/null)
+	if [ -z "$status" -o "$status" = "null" ];then
+		appendErrorLog "【请求错误】：请求的地址无效，请检查被控主机配置是否正确，并确保被控设备已接入网络！"
+		return 99
+	elif [ $status -ne 0 ];then
+		responseInvolid && return
+	fi
+	if [[ "${1,,}" == "--raw" ]];then  #返回原始JSON数据
+		echo "$json"
+	else  #返回可读的信息提示文本
+		local setStatus=$(echo "$json"|jq -r '.result' 2>/dev/null||echo "1")
+		[ "$setStatus" = "0" ] && echo "【成功】关闭插座成功！" || echo "【失败】关闭插座失败！"
+	fi
+	
+}
+
+powerRebootPlug() {
+	#重开插座（关闭插座后再次开启，中间间隔30秒）
+	powerOffPlug
+	echo "延时等待中..."
+	sleep 30
+	powerOnPlug
+}
+
+
+#——————————————————————————————————————————————————————————————
+#主逻辑开始：功能函数调用：
+
+#getPlugStatus   #获取插座开关所处状态
+#getPlugOpenCount
+#getPlugPower   #获取插座当前功率
+#powerOnPlug    #开启插座
+#powerOffPlug    #关闭插座
+#powerRebootPlug  #重启插座
+
+case "${1,,}" in 
+	"on")
+		echo "开启插座..."
+		powerOnPlug 
+	;;
+	"off")
+		echo "关闭插座..."
+		powerOffPlug
+	;;
+	"reboot")
+		echo "重启插座电源..."
+		powerRebootPlug
+	;;
+	"status")
+		echo "获取插座开关状态..."
+		getPlugStatus
+	;;
+	"version")
+		echo "获取插座固件版本..."
+		getPlugVersion
+	;;
+	"power")
+		echo "获取插座耗电功耗..."
+		getPlugPower
+	;;
+	"count")
+		echo "获取插座开关机次数..."
+		getPlugOpenCount
+	;;
+	"time")
+		echo "获取插座今日使用时长..."
+		getPlugPowerTime
+	;;
+	*)
+	:
+	#echo "Do Nothing"
+	;;
+esac
\ No newline at end of file