forked from LudovicRousseau/CCID
-
Notifications
You must be signed in to change notification settings - Fork 0
CCID driver
License
mskalski/CCID
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
Folders and files
Name | Name | Last commit message | Last commit date | |
---|---|---|---|---|
Repository files navigation
USB CCID IFD Handler ==================== This package provides the source code for a generic USB CCID (Chip/Smart Card Interface Devices) and ICCD (Integrated Circuit(s) Card Devices) driver. See the USB CCID [1] and ICCD [2] specifications from the USB working group. [1] http://www.usb.org/developers/devclass_docs/DWG_Smart-Card_CCID_Rev110.pdf [2] http://www.usb.org/developers/devclass_docs/DWG_Smart-Card_USB-ICC_ICCD_rev10.pdf Authors: ======== - Ludovic Rousseau <ludovic.rousseau@free.fr> - Carlos Prados for the PPS and ATR parsing code (taken from his towitoto driver) in towitoko/ directory. - Olaf Kirch for the T=1 TPDU code (from the OpenCT package) in openct/ directory. I (Ludovic Rousseau) greatly improved this code. CCID and ICCD readers: ====================== A reader can be in one of these list: - supported See http://pcsclite.alioth.debian.org/ccid/supported.html - should working See http://pcsclite.alioth.debian.org/ccid/shouldwork.html - unsupported See http://pcsclite.alioth.debian.org/ccid/unsupported.html - disabled See http://pcsclite.alioth.debian.org/ccid/disabled.html Supported operating systems: ============================ - GNU/Linux (libusb 1.0) - MacOS X/Darwin (libusb 1.0) See also http://pcsclite.alioth.debian.org/ccid.html for more information. Debug informations: =================== The driver uses the debug function provided by pcscd. So if pcscd sends its debug to stdout (pcscd --foreground) then the CCID driver will also send its debug to stdout. If pcscd sends its debug to syslog (by default) then the CCID driver will also send its debug to syslog. You can change the debug level using the Info.plist configuration file. The Info.plist is installed, by default, in /usr/local/pcsc/drivers/ifd-ccid.bundle/Contents/Info.plist or set the environment variable LIBCCID_ifdLogLevel. The debug level is set in the ifdLogLevel field. It is a binary OR combinaison of 4 different levels. - 1: critical: important error messages - 2: info: informative messages like what reader was detected - 4: comm: a dump of all the bytes exchanged between the host and the reader - 8: periodic: periodic info when pcscd test if a card is present (every 1/10 of a second) By default the debug level is set to 3 (1 + 2) and correspond to the critical and info levels. You have to restart the driver so it read the configuration file again and use the new debug level value. To restart the driver you just need to unplug all your CCID readers so the the driver is unloaded and then replug your readers. You can also restart pcscd. Voltage selection ================= You can change the voltage level using the Info.plist configuration file. The Info.plist is installed, by default, in /usr/local/pcsc/drivers/ifd-ccid.bundle/Contents/Info.plist The voltage level is set in the ifdDriverOptions field. It is a binary OR combinaison of 4 different levels. - 0: power on the card at 5V (default value) - 16: power on the card at 3V and, if 3V fails then use 5V - 32: power on the card at 1.8V, then 3V and then 5V - 48: let the reader decide By default the voltage level is set to 0 and correspond to 5V. You have to restart the driver so it read the configuration file again and use the new debug level value. To restart the driver you just need to unplug all your CCID readers so the the driver is unloaded and then replug your readers. You can also restart pcscd. Licence: ======== This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. History: ======== 1.4.4 - 13 May 2011, Ludovic Rousseau - Add support of Gemalto Ezio Shield, Gemalto Ezio CB+, Gemalto Ezio Shield Secure Channel, Gemalto Ezio Shield PinPad and Gemalto Ezio Generic - Activate USB automatic power suspend. The Linux kernel should power off the reader automatically if it is not used (pcscd is not running). - Add support of TLV Properties wLcdMaxCharacters and wLcdMaxLines. They just duplicate wLcdLayout - some minor bugs removed 1.4.3 - 2 April 2011, Ludovic Rousseau - Add support of Neowave Weneo, Vasco DIGIPASS 920, SCM SCL011, Feitian ePass2003 readers - use :libudev: instead of :libhal: naming scheme. - Do not install RSA_SecurID_getpasswd and Kobil_mIDentity_switch and the associated documentation. - the Secure Pin Entry of the HP USB Smart Card Keyboard is bogus so disable it - some minor bugs removed 1.4.2 - 22 February 2011, Ludovic Rousseau - Add support of Feitian SCR310 reader (also known as 301v2), ACS APG8201 PINhandy 1, Oberthur ID-ONE TOKEN SLIM v2, new Neowave Weneo token, Vasco DIGIPASS KEY 860, Vasco DIGIPASS KEY 200, Xiring Leo v2, Xiring MyLeo, Aktiv Rutoken lite readers - Add back support of "bogus" Oz776, REINER SCT and BLUDRIVE II - Ease detection of OpenCT by pcsc-lite - disable use of interrupt card events for multi slots readers (the algorithm is bogus and can't be used) - fix minor problems detected by the clang tool - some minor bugs removed 1.4.1 - 3 December 2010, Ludovic Rousseau - Add support of Gemalto Smart Guardian (SG CCID), ReinerSCT cyberJack RFID basis, Akasa AK-CR-03, BZH uKeyCI800-K18, Free Software Initiative of Japan Gnuk token readers - Remove O2 Micro Oz776 and Blutronics Bludrive II CCID since they are no more supported since version 1.4.0 - SecurePINVerify() & SecurePINModify(): Accept big and little endian byte orders for multibytes fields. The application should not use HOST_TO_CCID_16() and HOST_TO_CCID_32() any more and just use the normal byte order of the architecture. - Need pcsc-lite 1.6.5 for TAG_IFD_POLLING_THREAD_WITH_TIMEOUT - Add --enable-embedded (default is no) to build libccid for an embedded system. This will activate the NO_LOG option to disable logging and limit RAM and disk consumption. - Remove --enable-udev option since it is not used anymore with libhal. The udev rules file is now used to change the access rights of the device and not send a hotplug signal to pcscd. See http://ludovicrousseau.blogspot.com/2010/09/pcscd-auto-start.html - some minor bugs removed 1.4.0 - 4 August 2010, Ludovic Rousseau - add support of Kingtrust Multi-Reader, Dectel CI692, Todos CX00, C3PO LTC36, ACS AET65, Broadcom 5880, Tianyu Smart Card Reader, Gemalto Hybrid Smartcard Reader - Add support of the SCM SDI 010 again. At least the contact interface can be used. - Use libusb-1.0 instead of libusb-0.1 - add support of TAG_IFD_STOP_POLLING_THREAD and use of the asynchronous libusb API to be able to stop a transfer. - Request pcsc-lite 1.6.2 minimum (instead of 1.6.0) to have TAG_IFD_STOP_POLLING_THREAD defined - The O2MICRO OZ776 patch (for OZ776, OZ776_7772, REINER_SCT and BLUDRIVEII_CCID) is no more supported with libusb-1.0 - correctly get the IFSC from the ATR (ATR parsing was not always correct) - some minor bugs removed 1.3.13 - 4 June 2010, Ludovic Rousseau - much faster warm start (up to 3.8 second gained) - Add support of SCARD_ATTR_VENDOR_IFD_SERIAL_NO to get the serial number of the USB device - some minor bugs removed 1.3.12 - 8 May 2010, Ludovic Rousseau - add support of Todos AGM2 CCID, Cherry SmartTerminal XX7X, Smart SBV280, Ask CPL108, German Privacy Foundation Crypto Stick v1.2, id3 CL1356T5, Covadis Auriga, GoldKey PIV Token, Vasco DIGIPASS KEY 860, Vasco DIGIPASS KEY 200, Vasco DP855, Vasco DP865, Atmel AT90SCR100, Atmel AT90SCR050, Atmel VaultIC420, Atmel VaultIC440, Atmel VaultIC460, KOBIL Smart Token, KOBIL mIDentity 4smart, KOBIL mIDentity 4smart AES, KOBIL mIDentity visual, KOBIL mIDentity fullsize, KOBIL mIDentity 4smart fullsize AES, SCM SCR3500 - remove support of Smart SBV280 on manufacturer request. They use libusb directly. - remove support of SCM SDI 010 on manufacturer request since not supported by my driver - Enable the Broadcom 5880 reader. It should work after a firmware upgrade. - better support of Dell keyboard - better support of multislot readers (like the GemCore SIM Pro) - better support of SCM SCR3310 - better support of ICCD version A devices - The Covadis Véga-Alpha reader is a GemPC pinpad inside. So we use the same code to: . load the strings for the display . avoid limitation of the reader - IFDHControl(): the (proprietary) get firmware version escape command is allowed with a Gemalto reader . the (proprietary) switch interface escape command is allowed on the Gemalto GemProx DU . return IFD_ERROR_NOT_SUPPORTED instead of IFD_COMMUNICATION_ERROR if the dwControlCode value is not supported . return IFD_ERROR_INSUFFICIENT_BUFFER when appropriate - IFDHGetCapabilities(): add support of SCARD_ATTR_ICC_PRESENCE and SCARD_ATTR_ICC_INTERFACE_STATUS - support FEATURE_GET_TLV_PROPERTIES - add support of IOCTL_FEATURE_GET_TLV_PROPERTIES bMinPINSize & bMaxPINSize for Gemalto Pinpad V1 & Covadis Véga-Alpha - support extended APDU of up to 64kB with APDU readers. - get the language selected during Mac OS X installation as language to use for Covadis Véga-Alpha and Gemalto GemPC PinPad pinpad readers - FEATURE_MCT_READER_DIRECT is also supported by the Kobil mIDentity visual - better support of Sun Studio CC - some minor bugs removed 1.3.11 - 28 July 2009, Ludovic Rousseau - add support of Raritan D2CIM-DVUSB VM/CCID, Feitian SCR301, Softforum XecureHSM, 2 Neowave Weneo tokens, Synnix STD200, Aktiv Rutoken ECP, Alcor Micro SCR001, ATMEL AT91SC192192CT-USB, Panasonic USB Smart Card Reader 7A-Smart, Gemalto GemProx DU and SU - remove support of Reiner-SCT cyberJack pinpad(a) on request of Reiner-SCT. You should user the Reiner-SCT driver instead - define CFBundleName to CCIDCLASSDRIVER so that non class drivers have a higher priority. Used by pcsc-lite 1.5.5 and up. Add a --disable-class configure option so that the Info.plist does not define a Class driver. Default is class driver. - do not power up a card with a voltage not supported by the reader - add support of PIN_PROPERTIES_STRUCTURE structure and FEATURE_IFD_PIN_PROPERTIES - adds support of FEATURE_MCT_READERDIRECT. Only the Kobil TriB@nk reader supports this feature for now. This is used for the Secoder functionality in connected mode. - add support of a composite device. No change needed with libhal. use --enable-composite-as-multislot on Mac OS X since libhal is not available on Mac OS X or with libusb on Linux - some minor bugs removed 1.3.10 - 7 March 2009, Ludovic Rousseau - add support for MSI StarReader SMART, Noname reader (from Omnikey), Xiring Xi Sign PKI, Realtek 43 in 1 + Sim + Smart Card Reader, Atmel AT98SC032CT, Aktiv Rutoken Magistra, TianYu CCID SmartKey, Precise Biometrics 200 MC and 250 MC - add a patch to support the bogus OpenPGP card (on board key generation sometimes timed out) - disable support of the contactless part of SDI010 and SCR331DI (this code was reverse engineered and hard to maintain) - some minor bugs removed 1.3.9 - 18 November 2008, Ludovic Rousseau - add support for Aladdin eToken PRO USB 72K Java, Cherry SmartTerminal ST-1200USB, Atmel AT91SO, SpringCard Prox'N'Roll, CSB6 Basic, EasyFinger Ultimate, CSB6 Ultimate, EasyFinger Standard, CrazyWriter, CSB6 Secure, KONA USB SmartCard, HP MFP Smart Card Reader, ACS ACR122U PICC, Gemalto PDT, VMware Virtual USB CCID - MacOSX/configure: do not overwrite PCSC_CFLAGS, PCSC_LIBS, LIBUSB_CFLAGS and LIBUSB_LIBS if already defined by the user - by default, link statically against libusb on Mac OS X - IFDHPowerICC(): use a very long timeout for PowerUp since the card can be very slow to send the full ATR (up to 30 seconds at 4 MHz) - SecurePINVerify(): correct a bug when using a Case 1 APDU and a SCM SPR532 reader - log the reader name instead of just the pcscd Lun - some minor bugs removed 1.3.8 - 27 June 2008, Ludovic Rousseau - add support for Oberthur ID-One Cosmo Card - do not include the release number in the Info.plist to avoid a diff of a configuration file when upgrading the package. - do not fail compilation if libusb is not available - do not crash if the reader firmware is bogus and does not support chaining for extended APDU. This is the case for Kobil readers - some minor bugs removed 1.3.7 - 8 June 2008, Ludovic Rousseau - add support for ActivCard Activkey Sim, Pro-Active CSB6 Ultimate, id3 Semiconductors CL1356A HID - src/parse: do not try to parse devices with bInterfaceClass=0xFF by default (use command line argument -p for proprietary class) - configure.in: check if libusb-0.1 is emulated by libusb-compat + libusb-1.0 to use or not the USB interrupt feature - correct a bug in the serial communication (GemPC twin serial reader) - correct a pthread problem under Solaris - some minor bugs removed 1.3.6 - 30 April 2008, Ludovic Rousseau - add support for Covadis Alya, Covadis Véga, Precise Biometrics 250 MC, Vasco DP905, Validy TokenA sl vt - better support for the O2Micro OZ776, GemCore SIM Pro - the environment variable LIBCCID_ifdLogLevel overwrite the value of ifdLogLevel read from the Info.plist file - add support for DragonFly BSD - some minor bugs removed 1.3.5 - 22 February 2008, Ludovic Rousseau - add support for Gemplus Gem e-Seal Pro, Cherry SmartBoard, G83-6610 - use usb_interrupt_read() only if libusb > 0.1.12 or --enable-usb-interrupt is used. libusb <= 0.1.12 is bogus and will consume more CPU than needed. - contrib/Kobil_mIDentity_switch/Kobil_mIDentity_switch was broken on Linux since release 1.3.1 - some minor bugs removed 1.3.4 - 8 February 2008, Ludovic Rousseau - the serial driver could not be loaded because of the missing symbol InterruptRead - remove WAIT_FOR_SYSFS="bInterfaceProtocol" to do not delay udev 1.3.3 - 6 February 2008, Ludovic Rousseau - add support for Lexar Smart Enterprise Guardian and Blutronics Bludrive II CCID - add support of TAG_IFD_POLLING_THREAD using IFDHPolling() to detect asynchronous card movements. With this feature pcscd will not poll the reader every 0.4 second for a card movement but will wait until the reader sends a USB interrupt signal - correct a bug with an ICCD-B device and a receive buffer smaller than 4 bytes - remove the sleep in the udev rule. It slows down the detection of any USB device - some minor bugs removed 1.3.2 - 22 January 2008, Ludovic Rousseau - add support of Apple Mac OS X Leopard (10.5.1) - solve a hotplug problem on Ubuntu 7.10 (reader was not detected) - create a symlink from libccidtwin.so to libccidtwin.so.VERSION so that the /etc/reader.conf configuration file do not need to edited for each new driver version - make driver for the GemPC Serial compile again - some minor bugs removed 1.3.1 - 16 November 2007, Ludovic Rousseau - add support for "Philips Semiconductors JCOP41V221" ICCD card, O2Micro oz776 (ProductID 0x7772), CardMan5321, Giesecke & Devrient StarSign Card Token 350 and 550, SafeNet IKey4000, Eutron CryptoIdentity, Eutron Smart Pocket, Eutron Digipass 860, Lenovo Integrated Smart Card Reader, "Kobil EMV CAP - SecOVID Reader III, Charismathics token, Reiner-SCT cyberJack pinpad(a) - improve support of Mac OS X and *BSD - some minor bugs removed 1.3.0 - 10 May 2007, Ludovic Rousseau - add support of ICCD version A and B - add support for (new) KOBIL mIDentity, SchlumbergerSema Cyberflex Access e-gate ICCD, Fujitsu Siemens Computers SmartCard USB 2A and SmartCard Keyboard USB 2A readers, OmniKey CardMan 4321 - contrib/RSA_SecurID/RSA_SecurID_getpasswd: tool to get the on time password also displayed on the token screen - contrib/Kobil_mIDentity_switch: tool to activate the CCID reader of the Kobil mIDentity. The tool should be started automatically by the udev rule on Linux - GemPC pinpad: localisation of the string "PIN blocked", add Portuguese(pt), Dutch(nl) and Turkish(tr) localisations - some minor bugs removed 1.2.1 - 27 January 2007, Ludovic Rousseau - pcscd_ccid.rules: add non CCID generic (InterfaceClass: 0xFF) readers - INSTALL: document how to use --enable-udev on FreeBSD - move the O2Micro Oz7762 from the unsupported to the supported list since patches to support it are applied by default (O2MICRO_OZ776_PATCH) 1.2.0 - 19 January 2007, Ludovic Rousseau - add support for SCARD_ATTR_VENDOR_IFD_VERSION, SCARD_ATTR_VENDOR_NAME and SCARD_ATTR_MAXINPUT tags used by SCardGetAttrib(). Read SCARDGETATTRIB.txt for more documentation - add support for OmniKey CardMan 5125, CardMan 1021, C3PO LTC32, Teo by Xiring, HP USB Smartcard Reader - use --enable-twinserial to build the serial reader driver - use --enable-udev to configure for a use with Linux udev hotplug mechanism. This will allow pcscd to avoid polling the USB bus every 1 second - some minor bugs removed 1.1.0 - 11 August 2006, Ludovic Rousseau - support Extended APDU (up to 64KB) for readers in TPDU mode (many readers) or Extended APDU mode (very rare). This only works for T=1 cards. - add support for C3PO LTC31 (new version), OmniKey CardMan 3021, HP USB Smart Card Keyboard, Actividentity (ActiveCard) Activkey Sim, id3 Semiconductors CL1356D and CL1356T, Alcor Micro AU9520 - support the contactless interface of the SCR331-DI-NTTCOM - add support of FreeBSD - increase the USB timeout used for PIN verify/modify to not timeout before the reader - the 4-bytes value returned by CM_IOCTL_GET_FEATURE_REQUEST shall be encoded in big endian as documented in PCSC v2 part 10 ch 2.2 page 2. The applications using this feature shall be updated (to respect the PCSC specification). - use ./configure --enable-twinserial to compile and install the the driver for the GemPC Twin serial - some minor bugs removed 1.0.1 - 22 April 2006, Ludovic Rousseau - add support for Axalto Reflex USB v3, SCM Micro SDI 010, Winbond Electronics W81E381 chipset, Gemplus GemPC Card, Athena ASE IIIe KB USB, OmniKey CardMan 3621 - support Solaris (Solaris uses a different libusb) - better documentation for ./configure arguments - improve support of Cherry XX44 keyboard for PIN verify and change (circumvent firmware bugs) - do not use LTPBundleFindValueWithKey() from pcscd since this function has been removed from pcscd API - use -fvisibility=hidden is available to limit the number of exported symbols 1.0.0 - 3 March 2006, Ludovic Rousseau - add support for ActivCard USB Reader 3.0, Athena ASE IIIe USB V2, SCM Micro SCR 355, SCR 3311, SCR 3320, SCR 3340 ExpressCard54, Gemplus GemCore SIM Pro, GemCore POS Pro (serial and USB), GemPC Express (ExpressCard/54 interface), SmartEpad (v 2.0), OmniKey CardMan 5121 - greatly improve support of PIN PAD readers. We now support TPDU readers with T=1 cards - use l10n strings for the Gemplus GemPC PIN PAD (it has a screen). Supported languages are: de, en, es, fr, it - rename ACS ACR 38 in ACR 38U-CCID since the ACR 38 is a different reader and is not CCID compatible - allow to select the Power On voltage using Info.plist instead of recompiling the source code - correct bugs in the support of multi-slots readers - if the card is faster than the reader (TA1=97 for example) we try to use a not-so-bad speed (corresponding to TA1=96, 95 or 94) instead of the default speed of TA1=11 - the src/parse tool do not use the driver anymore. No need to update the Info.plist file first. - some minor bugs removed 0.9.4 - 27 November 2005, Ludovic Rousseau - add support for Eutron SIM Pocket Combo, Eutron CryptoIdentity, Verisign Secure Token and VeriSign Secure Storage Token, GemPC Card (PCMCIA), SCM SCR331-DI NTTCom, SCM Micro SCR 3310-NTTCom, Cherry ST-1044U, Cherry SmartTerminal ST-2XXX - add support of PC/SC v2 part 10 CM_IOCTL_GET_FEATURE_REQUEST add support of FEATURE_VERIFY_PIN_DIRECT and FEATURE_MODIFY_PIN_DIRECT remove support of IOCTL_SMARTCARD_VENDOR_VERIFY_PIN (now obsoleted). A sample code is available in examples/scardcontrol.c - we need pcsc-lite 1.2.9-beta9 since some structures used for PIN pad readers are defined by pcsc-lite - some (bogus) cards require an extra EGT but the ATR does not say so. We try to detect the bogus cards and set TC1=2 - IFDHSetProtocolParameters(): only use a data rate supported by the reader in the PPS negociation, otherwise we stay at the default speed. - calculate and store the read timeout according to the card ATR instead of using a fixed value of 60 seconds - increase the read timeout if the card sends and WTX request - improve support of GemPC Twin and GemPC Card (serial protocol) - reset the device on close only if DRIVER_OPTION_RESET_ON_CLOSE is set. The problem was that a device reset also disconnects the keyboard on a keyboard + reader device. - use color logs - some minor bugs removed 0.9.3 - 14 March 2005, Ludovic Rousseau - change the licence from GNU GPL to GNU Lesser GPL (LGPL) - add support for ACS ACR 38, Kobil KAAN Base, Kobil KAAN Advanced, Kobil KAAN SIM III, Kobil KAAN mIDentity, SCM Micro SCR 331, SCM Micro SCR 331-DI, SCM Micro SCR 335, SCM Micro SCR 3310, SCM Micro SCR 532, Cherry XX44 readers - improve communication speed with readers featuring "Automatic PPS made by the CCID" - switch the Cherry xx33 reader in ISO mode if power up in EMV mode fails. - add support of character level readers. Thanks to O2Micro for the patch - add support for the O2Micro OZ776S reader but the reader firmware is still bogus - check firmware version to avoid firmwares with bugs. You can still use a bogus firmware by setting DRIVER_OPTION_USE_BOGUS_FIRMWARE in Info.plist - some minor bugs removed 0.9.2 - 15 August 2004, Ludovic Rousseau - T=1 TPDU code: . the work on T=1 TPDU code was possible thanks to Gemplus validation team who helped me test, debug and bring the code to an EMV validation level. Thanks to Jérôme, Jean-Yves, Xavier and the Gemplus readers department . error code was not checked correctly . avoid a (nearly) infinite loop when resynch are needed. . correctly initialise an internal value to allow more than one reader to work - multi-slots readers . add support for multi-slots readers. The only one I have is a SCM Micro SCR 331-DI with a contact and a contactless interface. The contactless interface may or may not work for you since the reader uses proprietary (undocumented) commands. - GemPC Twin serial reader . perform a command (get the reader firmware) to be sure a GemPC Twin (serial or pcmcia) reader is connected . use a dynamic timeout when reading the serial port. The first timeout used when detecting the reader is 2 seconds to not wait too long if no reader is connected. Later timeouts are set to 1 minute to allow long time APDU. - use `pkg-config libpcsclite --cflags` to locate the pcsc-lite header files - use `pkg-config --print-errors --atleast-version=1.2.9-beta5 libpcsclite` to test the pcsc-lite version - code improvements thanks to the splint tool (http://www.splint.org/) 0.9.1 - 1 July 2004, Ludovic Rousseau - I forgot to define IFD_PARITY_ERROR in a .h file 0.9.0 - 1 July 2004, Ludovic Rousseau - The T=1 TPDU automata from Carlos Prados' Towitoko driver is very limited and do not support error management mechanisms. I then used the T=1 TPDU automata from OpenCT (OpenSC project). This automata is much more powerful but still lacks a lot of error management code. I then added all the needed code to reach the quality level requested by the EMV standard. - add support for new readers: . Advanced Card Systems ACR 38 . Cherry XX33 . Dell keyboard SK-3106 . Dell smart card reader keyboard . SCR 333 - add support of multi procotol cards (T=0 and T=1) - the debug level is now dynamic and set in the Info.plist file (no need to recompile the driver any more) - add support for the libusb naming scheme: usb:%04x/%04x:libusb:%s - INSTALL: add a "configuring the driver for the serial reader (GemPC Twin)" part - use `pkg-config libpcsclite --variable=usbdropdir` so you do not have to use --enable-usbdropdir=DIR or --enable-ccidtwindir=DIR even if pcscd does not use the default /usr/local/pcsc/drivers - add support of IOCTL_SMARTCARD_VENDOR_IFD_EXCHANGE and IOCTL_SMARTCARD_VENDOR_VERIFY_PIN in IFDHControl() - read ifdDriverOptions from Info.plist to limit the use of IOCTL_SMARTCARD_VENDOR_IFD_EXCHANGE (idea from Peter Williams) - provide an example of use of SCardControl() IOCTL_SMARTCARD_VENDOR_IFD_EXCHANGE and IOCTL_SMARTCARD_VENDOR_VERIFY_PIN in example/ - add a --enable-pcsclite option (default to yes) so that the driver can be compiled for a different framework (one needing tokenparser.l like Solaris) - Reset action is power off and power on, not just power on - use the include files from pcsc-lite - add a mechanism to allow power on at 1.8V, 3V and then 5V as specified by ISO 7816. We still use 5V for now to avoid problems with non ISO compliant cards 0.4.1 - 14 February 2004, Ludovic Rousseau - distribute missing files readers/supported_readers.txt and src/create_Info_plist.pl 'make install' failed because of this. 0.4.0 - 13 February 2004, Ludovic Rousseau - support of T=1 with TPDU readers. A lot of the T=1 code comes from Carlos Prados towitoko driver. My code is GNU GPL, his code is GNU LGPL so the global driver is GNU GPL - PPS negotiation if the reader does not do it automatically - add support for the Silitek SK-3105 keyboard. It's a USB device with multiple interfaces - use the create_Info_plist.pl script to generate the installed Info.plist from an Info.plist template and a list of supported readers. The Info.plist was too "complex" to maintain by hand since it now contains 11 entries - add support of IFDHCreateChannelByName to avoid wrong reader enumeration. This is not complete if you have multiple _identical_ readers. You need to use a > 1.2.0 pcsc-lite version (not yet released at that time) - build but do not install the serial ccidtwin driver by default since it is useless on computers without a serial port or without this reader for example. - read and write timeouts are not symmetric. write timout can be shorter since the reader and card is not supposed to do anything before receiving (write) a command - do not try to find usb.h and other libusb files if --disable-libusb is used. Needed if you only want to build the serial driver. Thanks to Niki Waibel for the patch - add a --enable-ccidtwindir argument to ./configure to specify the serial GemPC Twin installation directory - debug and code improvements and simplifications 0.3.2 - 4 November 2003, Ludovic Rousseau - src/commands.c: correct a stupid bug that occurs with an APDU with 2 bytes response. - Info.plist: add SPR 532 in list of supported readers - parse.c: do not exit if the InterfaceClass is 0xFF (proprietary). It is the case with old readers manufactured before the final release of the CCID specs. - move LTC31 reader from unsupported to supported reader list. It was my f ault since in used odd INS byte in my test applet and odd INS bytes are forbidden by ISO 7816-4 ch. 5.4.2 Instruction byte. Thanks to Josep Moné s Teixidor for pointing the problem. - src/commands.c: comment out the automatic GET RESPONSE part. I don't think it should be in the driver. Maybe in pcscd instead? 0.3.1 - 23 September 2003, Ludovic Rouseau - add --enable-multi-thread (enabled by default) for thread safe support an APDU multiplexing. You will need pcsc-lite-1.2.0-rc3 or above to use this feature. - add --enable-libusb=PATH option is your libusb is not installed in /usr or /usr/local - honor DESTDIR in install rules (closes [ #300110 ]). Thanks to Ville Skyttä for the patch. - src/ccid.c: do not switch the GemPC Key and GemPC Twin in APDU mode since it also swicth in EMV mode and may not work with non EMV cards - src/ccid_serial.c: complete reimplementation of the Twin serial protocol using a finite state automata (code much simpler) 0.3.0 - 10 September 2003, Ludovic Rousseau - support of GemPC Twin connected to a serial port. Thanks to Niki W. Waibel for a working prototype. - support of auto voltage at power up if the reader support it instead of forcing a 5V in all cases. - support of APDU mode instead of just TPDU if the reader support it. Thanks to Jean-Luc Giraud for the idea and inspiration I got from his "concurrent" driver. - support of "time request" from the card. - parse: new indentation for more readability of supported features. - switch the GemPC Key and GemPC Twin in APDU mode since they support it but do not announce it in the dwFeatures. - new build process using autoconf/automake. 0.2.0 - 26 August 2003, Ludovic Rousseau - Works under MacOS X - Info.plist: use an <array></array> for the alias enumeration - Makefile rework for *BSD and MacOS X 0.1.0 - 13 August 2003, Ludovic Rousseau - First public release $Id$ vim:ts=20
About
CCID driver
Resources
License
Stars
Watchers
Forks
Packages 0
No packages published
Languages
- C 92.3%
- M4 2.7%
- Shell 2.1%
- Makefile 1.3%
- Perl 1.3%
- Roff 0.3%