We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Hi all,
Im trying to work with a PN532 SPI NFC reader but it dont works. Version 1.8.0
debug libnfc.general log_level is set to 3 debug libnfc.general allow_autoscan is set to true debug libnfc.general allow_intrusive_scan is set to false debug libnfc.general 1 device(s) defined by user debug libnfc.general #0 name: "_PN532_SPI", connstring: "pn532_spi:/dev/spidev0.0:500000" debug libnfc.general 0 device(s) found using acr122_usb driver debug libnfc.general 0 device(s) found using pn53x_usb driver debug libnfc.driver.pn532_spi Attempt to open: /dev/spidev0.0 at 500000 Hz. debug libnfc.bus.spi SPI port speed requested to be set to 500000 Hz. debug libnfc.bus.spi ret 0 debug libnfc.bus.spi SPI port mode requested to be set to 0. debug libnfc.chip.pn53x Diagnose debug libnfc.chip.pn53x Timeout value: 500 debug libnfc.bus.spi RX: 00 debug libnfc.driver.pn532_spi Got 0 byte from SPI line before wakeup debug libnfc.chip.pn53x SAMConfiguration debug libnfc.chip.pn53x Timeout value: 1000 debug libnfc.bus.spi TX: 01 00 00 ff 03 fd d4 14 01 17 debug libnfc.bus.spi TX: 02 debug libnfc.bus.spi RX: 01 debug libnfc.bus.spi TX: 03 debug libnfc.bus.spi RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.spi TX: 02 debug libnfc.bus.spi RX: 01 debug libnfc.bus.spi TX: 03 debug libnfc.bus.spi RX: 00 00 ff 02 debug libnfc.bus.spi RX: fe debug libnfc.bus.spi TX: 03 debug libnfc.bus.spi RX: 15 debug libnfc.bus.spi TX: 03 debug libnfc.bus.spi RX: 00 error libnfc.driver.pn532_spi TFI Mismatch pn53x_check_communication: Input / Output Error debug libnfc.chip.pn53x InRelease debug libnfc.bus.spi TX: 01 00 00 ff 03 fd d4 52 00 da debug libnfc.bus.spi TX: 02 debug libnfc.bus.spi RX: 01 debug libnfc.bus.spi TX: 03 debug libnfc.bus.spi RX: 00 00 ff 00 ff 00 debug libnfc.chip.pn53x PN53x ACKed debug libnfc.bus.spi TX: 02 debug libnfc.bus.spi RX: 00 debug libnfc.bus.spi TX: 02 debug libnfc.bus.spi RX: 01 debug libnfc.bus.spi TX: 03 debug libnfc.bus.spi RX: 00 00 ff 03 debug libnfc.bus.spi RX: fd debug libnfc.bus.spi TX: 03 debug libnfc.bus.spi RX: 53 debug libnfc.bus.spi TX: 03 debug libnfc.bus.spi RX: d8 error libnfc.driver.pn532_spi TFI Mismatch debug libnfc.general Unable to open "pn532_spi:/dev/spidev0.0:500000". nfc-list: ERROR: Unable to open NFC device: pn532_spi:/dev/spidev0.0:500000
Any ideas?
Thanks!
The text was updated successfully, but these errors were encountered:
Raspberry pi?
Sorry, something went wrong.
No branches or pull requests
Hi all,
Im trying to work with a PN532 SPI NFC reader but it dont works.
Version 1.8.0
Any ideas?
Thanks!
The text was updated successfully, but these errors were encountered: