The full model can be found here.
| Part | Quantity | Notes | Source |
|---|---|---|---|
| flanged bearings (625) | 10 | amazon | |
| gt2 timing belt | 1 | amazon | |
| 5mm nuts | 30 | mcmaster | |
| stepper motors | 2 | amazon | |
| t-nuts | 20 | amazon | |
| v-wheels | 8 | amazon | |
| 6mm eccentric nut | 4 | openbuilds | |
| 1mm spacers 10mm od | 5 | openbuilds | |
| 6mm spacers 10mm od | 4 | mcmaster | |
| 20mm x 20mm v slot extrusion | 2 | openbuilds | |
| stepper motor tooth pulley (12mm dia) | 2 | amazon | |
| 5mm x 20mm screws | 6 | carriage idlers (need 4) | button head in my design |
| 5mm x 35mm screws | 10 | v-wheels (need 8) | button head in my design |
| 5mm x 30mm screws | 2 | belt clamp | button head in my design |
| 5mm x 10mm screws | 20 | mounting on the alu extrusions (need 11) | button head in my design |
| 5mm x 13mm screws | 4 | 12mm could also work, for the feet | button head in my design |
| 2.5mm x 10mm screws | 4 | button head in my design | |
| 3.5mm x 10mm screws | 8 | button head in my design | |
| servo motor | 1 | amazon | |
| 8mm wrench | 1 | amazon | |
| 5mm allen key | 1 | mcmaster | |
| 3.5 mm allen key | 1 | mcmaster |
Printed parts can be found in /stls.
The quantity of each part is listed in the name as such name_x${QUANTITY}.
The pen holder is not accounted for above. A potential design can be found here.
Note that this design requires a 2.5mm x 25mm screw and 2.5mm nut