-
Notifications
You must be signed in to change notification settings - Fork 11
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
MASS_ERASE get_status fail on Flash #5
Comments
GD32 MCU Tool need another driver, not WinUSB. About the problem, can you please in directory with pinecil updater execute Thanks |
Cannot open DFU device 0a5c:21e8 |
I also loaded the GD MCU 32 drivers and it flashed fine with that tool. |
Then it's not Flash Size error problem. Well, I found one person having same problem, but he probably didn't found solution. |
I'm having the same problem with the Pinecil I received today from the January batch. My output from dfu-util.exe -i is
Like @RyanHutchison, I was able to use the gd32 dfu-util to flash the device after installing their driver. |
Also not working for me. |
`dfu-util 0.9 Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc. Found DFU: [28e9:0189] ver=0100, devnum=62, cfg=1, intf=0, path="3-14", alt=1, name="@option Bytes /0x1FFFF800/01016Be", serial="??" Success with "GD32 MCU DFU Tool" version 3.8.2.9056 using "GD DFU Drivers" version 3.6.6.6167 -- GD32 DFU Tool set to Verify and Erase All Unit indicated settings reset on reboot as expected. Device functions as expected. Manually installing driver provided with Pinecil Firmware Updater v1.2 and attempting to flash over successfully flashed IronOS 2.14.1 from GD32 MCU DFU Tool -- same result. |
@codefaux so even GD32 tool doesn't work for you? |
It should be fixed in 1.3. Please let me know if it still persists. |
@gamelaster GD32 Tool worked; just indicating that using GD32 Tool did not 'repair' the inability to use the Pinecil Updater - it's just a workaround. (Mostly for clarification/documentation.) |
@codefaux yes, I know, that's why I made some changes and it should work in 1.3 without issues |
Tested and seems to be functioning now. |
@RyanHutchison Great, thank you very much for letting me know. |
I am unable to flash my new Pinecil.
Invalid DFU suffix signature A valid DFU suffix will be required in a future dfu-util release!!! Error during special command "MASS_ERASE" get_status
I also attempted to load to with the GD MCU 32 tool, but it was not listing any device available.
Windows 10 Pro using the loaded WinUSB adapter.
The text was updated successfully, but these errors were encountered: