Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

BIOS Settings #27

Closed
qhhuang-ai opened this issue May 31, 2020 · 8 comments
Closed

BIOS Settings #27

qhhuang-ai opened this issue May 31, 2020 · 8 comments

Comments

@qhhuang-ai
Copy link

Dose it need a further setting of BIOS? Cause I followed the instructions to install the os , and it failed.

@Mushmuch
Copy link

With the latest bios ending in “AB0”, the only required change for me was to change Windows mode from CSM to UEFI.
If you let “Above 4G decoding” disabled for Windows, you must add the following boot argument to the NVRAM: npci=0x2000

@Goooler
Copy link
Contributor

Goooler commented Jun 1, 2020

Dose it need a further setting of BIOS? Cause I followed the instructions to install the os , and it failed.

what's your bios version?

@qhhuang-ai
Copy link
Author

Dose it need a further setting of BIOS? Cause I followed the instructions to install the os , and it failed.

what's your bios version?

The bios version is E7A40AMS.AA0, and the installation froze up without errors at "2 minutes left" .

@Goooler
Copy link
Contributor

Goooler commented Jun 1, 2020

The bios version is E7A40AMS.AA0, and the installation froze up without errors at "2 minutes left" .

You can upgrate bios to latest version and try again

@qhhuang-ai
Copy link
Author

With the latest bios ending in “AB0”, the only required change for me was to change Windows mode from CSM to UEFI.
If you let “Above 4G decoding” disabled for Windows, you must add the following boot argument to the NVRAM: npci=0x2000
Thanks, but it didn't work.

@qhhuang-ai
Copy link
Author

The bios version is E7A40AMS.AA0, and the installation froze up without errors at "2 minutes left" .

You can upgrate bios to latest version and try again

I tried it, but it failed again, by the way, my cpu is Ryzen 3600, and does it need an alternation to the config.plist?

@portrayer
Copy link
Owner

The bios version is E7A40AMS.AA0, and the installation froze up without errors at "2 minutes left" .

You can upgrate bios to latest version and try again

I tried it, but it failed again, by the way, my cpu is Ryzen 3600, and does it need an alternation to the config.plist?

no need since vanilla patch is identical for ryzen.
make sure [windows os configuration] is set to UEFI and [Above 4G memory] disabled.

@qhhuang-ai
Copy link
Author

The bios version is E7A40AMS.AA0, and the installation froze up without errors at "2 minutes left" .

You can upgrate bios to latest version and try again

I tried it, but it failed again, by the way, my cpu is Ryzen 3600, and does it need an alternation to the config.plist?

no need since vanilla patch is identical for ryzen.
make sure [windows os configuration] is set to UEFI and [Above 4G memory] disabled.

Thanks for your reply, the configuration files are situtable for my desktop computer specifications, and I have used them as a bootloader for my hackintosh, and I still can not install the hackintosh from a usb driver with the same problems as aforementioned, but finally I installed the hackintosh with Paragon Hard Disk Manager 17 by restoring a backup image of hackintosh to my target hackintosh partition.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

4 participants