You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Description of Problem
When the 3 key is pressed (row 1, column 2 on the matrix), approximately 5%-10% of the time there appears to be an overflow of further characters. These characters appear as 32wesd on the default layout and sometimes 32wesd` on my personal layout (since I map the left alt key to operate as a backtick/tilde key when tapped). Using QMK configurator's test page, I can confirm that the left Alt key is being read as pressed as well, along with the 32wesd characters.
These appear to be keys in column 2 of the key matrix. I am not sure why the remaining keys on the fourth physical row of the keyboard are not also output (zx for the default firmware, xc on my personal firmware).
I have verified that this is not a soldering / hardware issue. The bug appears to occur most often shortly after the keyboard has been flashed.
In the bug linked above, the reporter found what might have been a matrix scanning issue. However, the Anne Pro 2 uses an entirely different MCU, so this may just be coincidence.
Describe the Bug
Keyboard
Viktus Styrka (MX version)
Firmware where Bug Occurs
viktus_styrka_nopunin10did_20240529.json
Description of Problem
When the 3 key is pressed (row 1, column 2 on the matrix), approximately 5%-10% of the time there appears to be an overflow of further characters. These characters appear as
32wesd
on the default layout and sometimes32wesd`
on my personal layout (since I map the left alt key to operate as a backtick/tilde key when tapped). Using QMK configurator's test page, I can confirm that the left Alt key is being read as pressed as well, along with the32wesd
characters.These appear to be keys in column 2 of the key matrix. I am not sure why the remaining keys on the fourth physical row of the keyboard are not also output (
zx
for the default firmware,xc
on my personal firmware).I have verified that this is not a soldering / hardware issue. The bug appears to occur most often shortly after the keyboard has been flashed.
Possible Related Bug
Anne Pro 2 (C15) Nonfunctional #19886
In the bug linked above, the reporter found what might have been a matrix scanning issue. However, the Anne Pro 2 uses an entirely different MCU, so this may just be coincidence.
Keyboard Used
viktus/styrka
Link to product page (if applicable)
https://viktus.design/collections/all/products/styrka
Operating System
Windows 10 Pro
qmk doctor Output
Is AutoHotKey / Karabiner installed
Other keyboard-related software installed
No response
Additional Context
No response
The text was updated successfully, but these errors were encountered: