Skip to content

Latest commit

 

History

History
121 lines (70 loc) · 9.64 KB

epoll-polling-engine.md

File metadata and controls

121 lines (70 loc) · 9.64 KB

epoll-based pollset implementation in gRPC

Sree Kuchibhotla (sreek@) [May - 2016] (Design input from Craig Tiller and David Klempner)

Status: As of June 2016, this change is implemented and merged.

1. Introduction

The document talks about the proposed changes to epoll-based implementation of pollsets in gRPC. Section-2 gives an overview of the current implementation, Section-3 talks about the problems in the current implementation and finally Section-4 talks about the proposed changes.

2. Current epoll-based implementation in gRPC

image

Figure 1: Current implementation

A gRPC client or a server can have more than one completion queue. Each completion queue creates a pollset.

The gRPC core library does not create any threads1 on its own and relies on the application using the gRPC core library to provide the threads. A thread starts to poll for events by calling the gRPC core surface APIs grpc_completion_queue_next() or grpc_completion_queue_pluck(). More than one thread can call grpc_completion_queue_next()on the same completion queue2.

A file descriptor can be in more than one completion queue. There are examples in the next section that show how this can happen.

When an event of interest happens in a pollset, multiple threads are woken up and there are no guarantees on which thread actually ends up performing the work i.e executing the callbacks associated with that event. The thread that performs the work finally queues a completion event grpc_cq_completion on the appropriate completion queue and "kicks" (i.e wakes ups) the thread that is actually interested in that event (which can be itself - in which case there is no thread hop)

For example, in Figure 1, if fd1 becomes readable, any one of the threads i.e Threads 1 to Threads K or Thread P, might be woken up. Let's say Thread P was calling a grpc_completion_queue_pluck() and was actually interested in the event on fd1 but Thread 1 woke up. In this case, Thread 1 executes the callbacks and finally kicks Thread P by signalling event_fd_P. Thread P wakes up, realizes that there is a new completion event for it and returns from grpc_completion_queue_pluck() to its caller.

3. Issues in the current architecture

Thundering Herds

If multiple threads concurrently call epoll_wait(), we are guaranteed that only one thread is woken up if one of the fds in the set becomes readable/writable. However, in our current implementation, the threads do not directly call a blocking epoll_wait()3. Instead, they call poll() on the set containing [event_fd4, epoll_fd]. (see Figure 1)

Considering the fact that an fd can be in multiple pollsets and that each pollset might have multiple poller threads, it means that whenever an fd becomes readable/writable, all the threads in all the pollsets (in which that fd is present) are woken up.

The performance impact of this would be more conspicuous on the server side. Here are a two examples of thundering herds on the server side.

Example 1: Listening fds on server

  • A gRPC server can have multiple server completion queues (i.e completion queues which are used to listen for incoming channels).
  • A gRPC server can also listen on more than one TCP-port.
  • A listening socket is created for each port the gRPC server would be listening on.
  • Every listening socket's fd is added to all the server completion queues' pollsets. (Currently we do not do any sharding of the listening fds across these pollsets).

This means that for every incoming new channel, all the threads waiting on all the pollsets are woken up.

Example 2: New Incoming-channel fds on server

  • Currently, every new incoming channel's fd (i.e the socket fd that is returned by doing an accept() on the new incoming channel) is added to all the server completion queues' pollsets 5).
  • Clearly, this would also cause all thundering herd problem for every read onthat fd

There are other scenarios especially on the client side where an fd can end up being on multiple pollsets which would cause thundering herds on the clients.

4. Proposed changes to the current epoll-based polling implementation:

The main idea in this proposal is to group 'related' fds into a single epoll-based set. This would ensure that only one thread wakes up in case of an event on one of the fds in the epoll set.

To accomplish this, we introduce a new abstraction called polling_island which will have an epoll set underneath (See Figure 2 below). A polling_island contains the following:

  • epoll_fd: The file descriptor of the underlying epoll set
  • fd_set: The set of 'fds' in the pollset island i.e in the epoll set (The pollset island merging operation described later requires the list of fds in the pollset island and currently there is no API available to enumerate all the fds in an epoll set)
  • event_fd: A level triggered event fd that is used to wake up all the threads waiting on this epoll set (Note: This event_fd is added to the underlying epoll set during pollset island creation. This is useful in the pollset island merging operation described later)
  • merged_to: The polling island into which this one merged. See section 4.2 (case 2) for more details on this. Also note that if merged_to is set, all the other fields in this polling island are not used anymore

In this new model, only one thread wakes up whenever an event of interest happens in an epoll set.

drawing

Figure 2: Proposed changes

4.1 Relation between fd, pollset and polling_island:

  • An fd may belong to multiple pollsets but belongs to exactly one polling_island
  • A pollset belongs to exactly one polling_island
  • An fd and the pollset(s) it belongs to, have same polling_island

4.2 Algorithm to add an fd to a pollset

There are two cases to check here:

  • Case 1: Both fd and pollset already belong to the same polling_island
    • This is straightforward and nothing really needs to be done here
  • Case 2: The fd and pollset point to different polling_islands: In this case we merge both the polling islands i.e:
    • Add all the fds from the smaller polling_island to the larger polling_island and update the merged_to pointer on the smaller island to point to the larger island.
    • Wake up all the threads waiting on the smaller polling_island's epoll_fd (by signalling the event_fd on that island) and make them now wait on the larger polling_island's epoll_fd
    • Update fd and pollset to now point to the larger polling_island

4.3 Directed wakeups:

The new implementation, just like the current implementation, does not provide us any guarantees that the thread that is woken up is the thread that is actually interested in the event. So the thread that woke up executes the callbacks and finally has to 'kick' the appropriate polling thread interested in the event.

In the current implementation, every polling thread also had a event_fd on which it was listening to and hence waking it up was as simple as signalling that event_fd. However, using an event_fd also meant that every thread has to use a poll() (on event_fd and epoll_fd) instead of doing an epoll_wait() and this resulted in the thundering herd problems described above.

The proposal here is to use signals and kicking a thread would just be sending a signal to that thread. Unfortunately there are only a few signals available on posix systems and most of them have pre-determined behavior leaving only a few signals SIGUSR1, SIGUSR2 and SIGRTx (SIGRTMIN to SIGRTMAX) for custom use.

The calling application might have registered other signal handlers for these signals. `We will provide a new API where the applications can "give a signal number" to gRPC library to use for this purpose.

void grpc_use_signal(int signal_num)

If the calling application does not provide a signal number, then the gRPC library will relegate to using a model similar to the current implementation (where every thread does a blocking poll() on its wakeup_fd and the epoll_fd). The functionpsi_wait()in figure 2 implements this logic.

**>> **(NOTE: Or alternatively, we can implement a turnstile polling (i.e having only one thread calling epoll_wait() on the epoll set at any time - which all other threads call poll on their wakeup_fds) in case of not getting a signal number from the applications.

Notes

Footnotes

  1. Only exception is in case of name-resolution

  2. However, a grpc_completion_queue_next() and grpc_completion_queue_pluck() must not be called in parallel on the same completion queue

  3. The threads first do a blocking poll() with [wakeup_fd, epoll_fd]. If the poll() returns due to an event of interest in the epoll set, they then call a non-blocking i.e a zero-timeout epoll_wait() on the epoll_fd

  4. event_fd is the linux platform specific implementation of grpc_wakeup_fd. A wakeup_fd is used to wake up polling threads typically when the event for which the polling thread is waiting is already completed by some other thread. It is also used to wake up the polling threads in case of shutdowns or to re-evaluate the poller's interest in the fds to poll (the last scenario is only in case of poll-based (not epoll-based) implementation of pollsets).

  5. See more details about the issue here https://github.com/grpc/grpc/issues/5470 and for a proposed fix here: https://github.com/grpc/grpc/pull/6149