TCP-PORT-SCANNER-PYTHON

A python based TCP port scanner featuring 8 different scans. Refer to the 8 scans performed : 8 Scans PPT

SYNOPSIS

This python project presents 7 TCP scans and 1 UDP scan.

Scans can be performed by entering Target IP address and entering the Port number.
Port numbers can be entered as a single number, a list or a range.
Output in 30 seconds to 1 minute. (Usually the time taken will depend on the system and internet connection)

Requires Python2 version preferably python 2.7
Also requires a Linux environment such as WSL, or linux OS in VBox, or actual Linux OS, etc...
After the above 2 rquirements, run the following command for help :-

sudo python2 TCP_PORT_SCANNER.py -h

Demonstrating the port arguments
- -p (single port number),
- -pl (list of port numbers separated by commas), and
- -pr (port range of form a-b)
Command to run the above variations(All variations can run independent of each other!!!) :-

sudo python2 TCP_PORT_SCANNER.py <IPV4 address> -p <Single port number> -pl <Of form a,b,c> -pr <Of form a-b>

sudo python2 TCP_PORT_SCANNER.py 8.8.8.8 -p 80 -pl 53,853 -pr 441-444

sudo python2 TCP_PORT_SCANNER.py 8.8.8.8 -pr 441-444

For further Demo and use of this project, please refer to the PDF file attached : REFERENCE WORKING.pdf