GoSublime.sublime-settings

{
	// The maximum amount of memory(MiB) that MarGo is allowed to use
	"margo_oom": 1000,

	// you may set specific environment variables here
	// e.g "env": { "PATH": "$HOME/go/bin:$PATH" }
	// in values, $PATH and ${PATH} are replaced with
	// the corresponding environment(PATH) variable, if it exists.
	"env": {},

	// Your shell. e.g. on Linux and OS X, if your shell bash:
	// you may set it to ["/bin/bash", "--login", "-c", "$CMD"]
	// it's useful to pass the --login argument in order for it run your ~/.bashrc etc.
	// otherwise environment variables may not be seen by Sublime Text and therefore GoSublime
	//
	// If set, commands are passed to it instead of the Python default which for *nix is usually
	// /bin/sh which in most cases is not what you want
	//
	// the special entry "$CMD" is replaced by the actual command
	"shell": [],

	// whether or not pkg files should be automatically saved when necessary (e.g. when running 9o `replay` or `go test` commands)
	"autosave": true,

	// Whether or not gscomplete(gocode) is enabled
	"gscomplete_enabled": true,

	// Whether or not gsfmt is enabled
	"fmt_enabled": true,

	// whether or not to indent with tabs (alignment is always done using spaces)
	"fmt_tab_indent": true,

	// the assumed width of the tab character (or number of spaces to indent with)
	"fmt_tab_width": 8,

	// Whether or not gslint is enabled
	"gslint_enabled": true,

	// filter the kinds of lint checks that are done. supported kinds:
	//
	// gs.syntax - parser/syntax errors - it makes no sense to filter this as it will simply
	//             manifest itself in other checks (which will likely not be done if there are syntax errors)
	// gs.flag.parse - check for possibly missing calls to flag.Parse()
	// gs.types - do a typecheck using the go/types package(like the old gotype)
	//            disabled by default until it's ready(copied from tip)
	"lint_filter": [
		"gs.types"
	],

	// Whether or not comp lint is enabled (this might conflict with gslint)
	"comp_lint_enabled": false,

	// The list of commands that comp-lint will run (in the order specified)
	// each entry contains a map of:
	//    cmd: a list containing the command and its args
	//    shell: whether or not use the $shell to run this command
	//        if you don't need $shell features then don't set this.
	//    global: whether or not commands like go install should affect the system globally
	//        by default the environment variable GOBIN is set to ($TEMPDIR/GoSublime/bin
	//        which in the installation of commands via comp-lint going there instead of into
	//        one of your GOPATHs.
	//        setting this to true, you can e.g automate the actual installation of your commands
	// additionally, for `shell` and `global` if the value is not `true` then it's assumed to be false
	"comp_lint_commands": [
		{"cmd": ["go", "install"]}
	],

	// how long to wait after the last keystroke before the gslint_cmd command is run (in milliseconds)
	"gslint_timeout": 100,

	// Not Implemented
	// Whether or not gslint is enabled
	"lint_enabled": true,

	// Not Implemented
	// list of linters to run
	// note: before the linters are run, the builtin gs.syntax linter is run
	//       * its purpose is to do a basic syntax check on the active file.
	//       * by design, it cannot be disabled
	//       * if there is a syntax error, no user-defined linters will be run
	//
	// each linter is an object of the form:
	//
	// {
	// 	"ctx": "", // the context in which this linter runs, e.g. "live"
	// 	           // default: "live", builtin contexts:
	//             //      live: the linters are being called while you're editing the file
	//             //      save: the linters are being called after saving.
	//             //            this can be used to e.g. rebuild or install the pkg
	//
	// 	"pat": "", // a regexp pattern that will define the following variables:
	// 	           // fn: the filename
	// 	           // line: the line number (starting from 1)
	// 	           // column: the column number (starting from 1)
	// 	           //         (this can be considered optional because the error message is still useful without it)
	// 	           // message: the error message
	// 	           //
	// 	           // the default pat will be defined such that it matches `main.go:1:2 error` resulting in:
	// 	           //     fn: main.go
	// 	           //     line: 1
	// 	           //     column: 2
	// 	           //     message: error
	// 	           //
	// 	           // it will also allow `line` and `column` to be missing. this should be sufficient
	// 	           // for the output of the go tools (go vet, compilers, etc.)
	//
	// 	"env": "", // an object mapping keys to string values that will be added to the default env
	// 	           // you could, e.g. set {"GOBIN": "/tmp"} in order to avoid installing potentially
	// 	           // broken commands into your GOPATH*/bin
	//
	// 	"kind": "", // a string that identifies the linter, e.g. `go.vet'
	// 	            // this is useful to be able to identify what kind of error you're seeing,
	// 	            // but is otherwise optional
	//
	// 	"cmd": [], // the command to run, e.g. ["go", "vet"]
	// }
	//
	// the minimal linter is thus: {"cmd": ["go", "vet"]}
	//
	// builtin linters:
	//    {"cmd": ["gs.flag.parse"]}: try to report calls to e.g. flag.Int(),flag.String()
	//                                for which there is no call to flag.Parse()
	//
	//    {"cmd": ["gs.types"]}: this is essentially `gotype`, it will do a full typecheck of the pkg
	//                           similar to the compilers. it's faster than doing a full `go build`
	//                           however, it can lead to false-positive errors, especially on cgo
	//                           and other non-pure-go pkgs
	"linters": [],

	// whether or not to include snippets in the auto-completion list
	"autocomplete_snippets": true,

	// whether or not to include Test*, Benchmark* and Example* functions in the auto-completion list
	"autocomplete_tests": false,

	// whether or not builtin types and functions should be shown in the auto-completion list
	"autocomplete_builtins": false,

	// whether or not to show an expanded(closure) version of func types in the auto-completion list
	// e.g. `type Fun func(i int)`
	// will result in two entries `Fun` and `Fun {}`
	// expanding to `Fun` and `func(i) {...}` respectively
	"autocomplete_closures": false,

	// you may set this to a regexp which will be used to filter entries in the auto-completion list
	// e.g. "autocomplete_filter_name": "^autogenerated_" will prevent any type or function
	// whose name begins with "autogenerated_" from appearing in the auto-completion list
	"autocomplete_filter_name": "",

	// whether or not autocomplete should suggest possible imports when autocomplete fails to
	// find a match.
	// note: this feature only comes into effect when autocomplete was triggered after a dot, e.g. `fmt.|`
	"autocomplete_suggest_imports": false,

	// whether or not to show function call tip in the status bar as you type
	// the same can be achieved ctrl+dot,ctrl+space using an output panel
	"autocomplete_live_hint": false,

	// commands to run on (post) save - list of objects of the form {"cmd": "...", "args": {...}}
	// Any TextCommand may be run. Supported GS commands include:
	//     gs_comp_lint - compile the pkg and report any errors
	"on_save": [],

	// as an alternative to Sublime Text's snippet system you may add snippets to GoSublime's
	// code-completion by adding them to your user settings in the same format as bellow.
	//
	// "snippets": [
	//     {
	//         "match": {"global": true}, // these snippets will only be presented in the global scope
	//         "snippets": [
	//             {"text": "init", "title": "func init()", "value": "func init() {\n\t$1\n}"}
	//         ]
	//     },
	//     {
	//         "match": {"local": true}, // these snippets will only be present in a function scope
	//         "snippets": [
	//             {"text": "print", "title": "print(...)", "value": "print($1)"},
	//             {"text": "println", "title": "println(...)", "value": "println($1)"}
	//         ]
	//     }
	// ]
	//
	// you maybe add field markers ($1, $2, etc) to the `value` string to dictate where the cursor is place
	// once a completion is expanded and where it's placed once you press tab afterwards.
	// duplicate markers e.g f("...", $1, $1) will result in multiple cursors, one for each duplication.
	"snippets": [],

	"default_snippets": [
		{
			"match": {"global": true, "pkgname": ""},
			"snippets": [
				{"text": "package ${default_pkgname}", "title": "", "value": "package ${default_pkgname}\n\n$1\n"}
			]
		},
		{
			"match": {"global": true, "pkgname": "^main$"},
			"snippets": [
				{"text": "func main", "title": "func main {...}", "value": "func main() {\n\t$0\n}\n"}
			]
		},
		{
			"match": {"global": true, "pkgname": "."},
			"snippets": [
				{"text": "import", "title": "import (...)", "value": "import (\n\t\"$1\"\n)"},
				{"text": "func", "title": "func {...}", "value": "func ${1:name}($2)$3 {\n\t$0\n}"},
				{"text": "var", "title": "var (...)", "value": "var (\n\t$1\n)"},
				{"text": "const", "title": "const (...)", "value": "const (\n\t$1\n)"},
				{"text": "init", "title": "func init()", "value": "func init() {\n\t$1\n}"},
				{
					"text": "func http handler",
					"title": "func(rw, req)",
					"value": "func ${1:name}(rw http.ResponseWriter, req *http.Request) {\n\t$0\n}"
				}
			]
		},
		{
			"match": {"global": true, "pkgname": ".", "has_types": true},
			"snippets": [
				{
					"text": "func (*${typename})",
					"title": "func (...) {...}",
					"value": "func (${1:${typename_abbr}} ${2:*}${typename}) ${3:name}($4)$5 {\n\t$0\n}"
				}
			]
		},
		{
			"match": {"local": true},
			"snippets": [
				{"text": "func", "title": "func{...}()", "value": "func($1) {\n\t$0\n}($2)"},
				{"text": "var", "title": "var [name] [type]", "value": "var ${1:name} ${2:type}"}
			]
		}
	],

	// if set, 9o will run in single-instance mode instead of per-pkg
	// the name can be any string, so you can e.g. set it per-project and maintain project-specific
	// command history
	"9o_instance": "",

	// if set 9o will use the specified color scheme.
	// the path must relative to `Packages` e.g. `Packages/My/9o Specific.tmTheme`
	// `""` essentially means no color_scheme (like the Sublime Text console)
	// `"default"` leaves it as-is, i.e. matching the color_scheme that's being used for your other views
	"9o_color_scheme": "default",

	// what 9o command to run when (super or )ctrl+dot,ctrl+b us pressed
	// e.g. ["go", "build"]
	// the 9o command ^1 recalls the last command you ran manually
	// see 9o help(ctrl+9 "help") for more details about what commands are supported
	"build_command": ["^1"],

	"auto_complete_triggers": [ {"selector": "source.go", "characters": "."} ],

	"extensions": ["go"]
}