Doesn't block connections when GSM (2G) is selected from networks modes.

[manjorno]

The application works when WCDMA (3G) network mode is selected but doesn't block the connections when GSM (2G) mode is selected

I am using SE Xperia mini and ICS 4.0.4.

[ukanth]

Can you send me the list of network interfaces on your device ? Please go to show rules-> network interfaces and type that list here. I can fix it in the next build.

[manjorno]

I can't find where is this "show rules-> network interfaces" but here is what i extracted from the terminal:
app_73@android:/ $ ls /sys/class/net
dummy0
ip6tnl0
lo
rmnet0
rmnet1
rmnet2
rmnet3
rmnet4
rmnet5
rmnet6
rmnet7
rmnet_sdio0
rmnet_sdio1
rmnet_sdio2
rmnet_sdio3
rmnet_sdio4
rmnet_sdio5
rmnet_sdio6
rmnet_sdio7
sit0
tunl0
wlan0
app_73@android:/ $
app_73@android:/ $ ip link show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN
link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
3: rmnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000
link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
4: rmnet1: <BROADCAST,MULTICAST> mtu 2000 qdisc noop state DOWN qlen 1000
link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
5: rmnet2: <BROADCAST,MULTICAST> mtu 2000 qdisc noop state DOWN qlen 1000
link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
6: rmnet3: <BROADCAST,MULTICAST> mtu 2000 qdisc noop state DOWN qlen 1000
link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
7: rmnet4: <BROADCAST,MULTICAST> mtu 2000 qdisc noop state DOWN qlen 1000
link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
8: rmnet5: <BROADCAST,MULTICAST> mtu 2000 qdisc noop state DOWN qlen 1000
link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
9: rmnet6: <BROADCAST,MULTICAST> mtu 2000 qdisc noop state DOWN qlen 1000
link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
10: rmnet7: <BROADCAST,MULTICAST> mtu 2000 qdisc noop state DOWN qlen 1000
link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
11: rmnet_sdio0: <BROADCAST,MULTICAST> mtu 2000 qdisc noop state DOWN qlen 1000
link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
12: rmnet_sdio1: <BROADCAST,MULTICAST> mtu 2000 qdisc noop state DOWN qlen 1000
link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
13: rmnet_sdio2: <BROADCAST,MULTICAST> mtu 2000 qdisc noop state DOWN qlen 1000
link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
14: rmnet_sdio3: <BROADCAST,MULTICAST> mtu 2000 qdisc noop state DOWN qlen 1000
link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
15: rmnet_sdio4: <BROADCAST,MULTICAST> mtu 2000 qdisc noop state DOWN qlen 1000
link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
16: rmnet_sdio5: <BROADCAST,MULTICAST> mtu 2000 qdisc noop state DOWN qlen 1000
link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
17: rmnet_sdio6: <BROADCAST,MULTICAST> mtu 2000 qdisc noop state DOWN qlen 1000
link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
18: rmnet_sdio7: <BROADCAST,MULTICAST> mtu 2000 qdisc noop state DOWN qlen 1000
link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
19: tunl0: <NOARP> mtu 1480 qdisc noop state DOWN
link/ipip 0.0.0.0 brd 0.0.0.0
20: sit0: <NOARP> mtu 1480 qdisc noop state DOWN
link/sit 0.0.0.0 brd 0.0.0.0
21: ip6tnl0: <NOARP> mtu 1460 qdisc noop state DOWN
link/tunnel6 :: brd ::
22: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
app_73@android:/ $

rmnet0 goes up when either GSM or WCDMA network mode is selected.

[ghost]

Same problem on an LG Optimus 2X with Cyanogenmod 10.0 (Kowalski kernel): afwall+ does not work when 2G only is selected, but does work on 3G and wifi.