Update Eco-FriendlyLamp.md

ASKnetCommunity · Aug 31, 2023 · b0292c6 · b0292c6
1 parent b84fda9
commit b0292c6
Showing 1 changed file with 8 additions and 14 deletions.
diff --git a/Eco-FriendlyLamp.md b/Eco-FriendlyLamp.md
@@ -11,24 +11,19 @@ A device for giving light, either one consisting of an electric bulb together wi
 * out of use container ( transparent )
 * switch
 * resistors
-  ![Materials](https://user-images.githubusercontent.com/56769901/255320072-2ab139ae-0b87-4b10-91c7-1b6cd79a5234.png)
+  ![Materials for Bright light](/images/Bright-light.jpg)
 
-The most sustainable lamp materials are recycled and/or recyclable—such as scrap cardboard, glass waste, plastic bottles, and salvaged wood. When new natural materials are used (such as bamboo, wood, and shells) they should be responsibly sourced ![image](https://user-images.githubusercontent.com/56769901/255320138-22299086-4c6b-4e7a-8070-f29c163ab9a2.png)
+The most sustainable lamp materials are recycled and/or recyclable—such as scrap cardboard, glass waste, plastic bottles, and salvaged wood. When new natural materials are used (such as bamboo, wood, and shells) they should be responsibly sourced ![Schematic for Bright light](/images/laamp.jpg)
 
 
-## Steps in the making:
+# Steps in the making:
 ### Step 1: 
 _Gather all the materials_ you will need for making the lamp, including batteries, a switch, a transparent container, cardboard for covering the container at the top, a battery case, wires, a bright LED, and a lamp holder.
 
 ### Step 2: 
 _Start by preparing the transparent container_ You can use an old glass jar or a plastic container with a lid. Make sure it is clean and free from any debris.
 
-![Glass](https://github.com/maliarich/Reuse-of-Discarded-Electronic-Materials/assets/56769901/49e185bd-d956-4ac4-b889-1d4a00b343b4)
-> Please use the following way to embed your images
-```
-![Glass](/images/Glass.jpg)
-```
-![Glass](/images/Glass.jpg)
+![Transparent glass from Discarded electronics](/images/Transparent-Glass.jpg)
 
 ### Step 3: 
 _Punch a small hole in the container lid to accommodate the wires from the LED and the switch_ This hole should be big enough to pass the wires through without any difficulty.
@@ -39,15 +34,14 @@ _Take the LED and attach it to the wires_ Connect the positive side of the LED t
 ### Step 5: 
 _Connect the wires from the LED to the battery case_ The red wire should be connected to the positive terminal, and the black wire to the negative terminal. Again, make sure the connections are secure and properly insulated.
 
-![battey case](https://github.com/maliarich/Reuse-of-Discarded-Electronic-Materials/assets/56769901/e5a0e098-77df-4165-8c28-44c0fdf05dfd)
+![battey case](/images/Battery-case.jpg)
 
 ### Step 6: 
 _Attach the switch to the wires_ Connect the red wire to one terminal of the switch, and the black wire to the other terminal. Secure the connections, ensuring they are properly insulated.
 
 ### Step 7: 
 _Place the batteries in the battery case_ Make sure the positive and negative terminals of the batteries match the corresponding terminals in the case. Close the case tightly to secure the batteries.
 
-![Batteries](https://github.com/maliarich/Reuse-of-Discarded-Electronic-Materials/assets/56769901/590df11f-b316-43e9-b90a-befa444bf190)
 ![Batteries](/images/Batteries.jpg)
 
 ### Step 8: 
@@ -56,14 +50,14 @@ _Insert the wire with the LED and switch through the hole in the container lid_
 ### Step 9: 
 _Attach the lamp holder on top of the container lid_ Ensure it fits securely and does not obstruct the LED.
 
-![handle](https://github.com/maliarich/Reuse-of-Discarded-Electronic-Materials/assets/56769901/9a511189-f615-494b-9aac-2f6b140c0a50)
+![handle](/images/Holder.jpg)
 
 ### Step 10: 
 _Cut a piece of cardboard to cover the top of the transparent container where the lamp holder is attached_ This will act as a diffuser for the LED light and provide a softer glow.
 
-![Cardboard](https://github.com/maliarich/Reuse-of-Discarded-Electronic-Materials/assets/56769901/9eaf4875-3372-411a-a0c6-bf26bcfcd8a9)
+![Cardboard](/images/Card-board.jpg)
 
 ### Step 11: 
 Place the cardboard cover on top of the container, making sure it fits snugly.
 
-![Eco- Freindly Lamp](https://github.com/maliarich/Reuse-of-Discarded-Electronic-Materials/assets/56769901/1a5bc0b6-1ce2-4fb6-80ba-000ec39676f6) 
+![Eco- Freindly Lamp](/images/Eco-Friendly-lamp.jpg)