Skip to content

Aejis/ruby-style-guide

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 

Repository files navigation

Prelude

Style is what separates the good from the great.
-- Bozhidar Batsov

One thing has always bothered me as Ruby developer - Python developers have a great programming style reference (PEP-8) and we never got an official guide, documenting Ruby coding style and best practices. And I do believe that style matters. I also believe that such fine fellows, like us Ruby developers, should be quite capable to produce this coveted document.

This guide started its life as our internal company Ruby coding guidelines (written by yours truly). At some point I decided that the work I was doing might be interesting to members of the Ruby community in general and that the world had little need for another internal company guideline. But the world could certainly benefit from a community-driven and community-sanctioned set of practices, idioms and style prescriptions for Ruby programming.

Since the inception of the guide I've received a lot of feedback from members of the exceptional Ruby community around the world. Thanks for all the suggestions and the support! Together we can make a resource beneficial to each and every Ruby developer out there.

By the way, if you're into Rails you might want to check out the complementary Ruby on Rails 3 Style Guide.

The Ruby Style Guide

This Ruby style guide recommends best practices so that real-world Ruby programmers can write code that can be maintained by other real-world Ruby programmers. A style guide that reflects real-world usage gets used, and a style guide that holds to an ideal that has been rejected by the people it is supposed to help risks not getting used at all – no matter how good it is.

The guide is separated into several sections of related rules. I've tried to add the rationale behind the rules (if it's omitted I've assumed that is pretty obvious).

I didn't come up with all the rules out of nowhere - they are mostly based on my extensive career as a professional software engineer, feedback and suggestions from members of the Ruby community and various highly regarded Ruby programming resources, such as "Programming Ruby 1.9" and "The Ruby Programming Language".

The guide is still a work in progress - some rules are lacking examples, some rules don't have examples that illustrate them clearly enough. In due time these issues will be addressed - just keep them in mind for now.

You can generate a PDF or an HTML copy of this guide using Transmuter.

RuboCop is a code analyzer, based on this style guide.

Translations of the guide are available in the following languages:

Table of Contents

Source Code Layout

Nearly everybody is convinced that every style but their own is ugly and unreadable. Leave out the "but their own" and they're probably right...
-- Jerry Coffin (on indentation)

  • Use UTF-8 as the source file encoding.

  • Use two spaces per indentation level. No hard tabs.

    # bad - four spaces
    def some_method
        do_something
    end
    
    # good
    def some_method
      do_something
    end
  • Use Unix-style line endings. (*BSD/Solaris/Linux/OSX users are covered by default, Windows users have to be extra careful.)

    • If you're using Git you might want to add the following configuration setting to protect your project from Windows line endings creeping in:

      $ git config --global core.autocrlf true

  • Don't use ; to separate statements and expressions. As a corollary - use one expression per line.

    # bad
    puts 'foobar'; # superfluous semicolon
    
    puts 'foo'; puts 'bar' # two expression on the same line
    
    # good
    puts 'foobar'
    
    puts 'foo'
    puts 'bar'
    
    puts 'foo', 'bar' # this applies to puts in particular
  • Prefer a single-line format for class definitions with no body.

    # bad
    class FooError < StandardError
    end
    
    # okish
    class FooError < StandardError; end
    
    # good
    FooError = Class.new(StandardError)
  • Avoid single-line methods. Although they are somewhat popular in the wild, there are a few peculiarities about their definition syntax that make their use undesirable. At any rate - there should no more than one expression in a single-line method.

    # bad
    def too_much; something; something_else; end
    
    # okish - notice that the first ; is required
    def no_braces_method; body end
    
    # okish - notice that the second ; is optional
    def no_braces_method; body; end
    
    # okish - valid syntax, but no ; make it kind of hard to read
    def some_method() body end
    
    # good
    def some_method
      body
    end

    One exception to the rule are empty-body methods.

    # good
    def no_op; end
  • Use spaces around operators, after commas, colons and semicolons, around { and before }. Whitespace might be (mostly) irrelevant to the Ruby interpreter, but its proper use is the key to writing easily readable code.

    sum = 1 + 2
    a, b = 1, 2
    1 > 2 ? true : false; puts 'Hi'
    [1, 2, 3].each { |e| puts e }

    The only exception, regarding operators, is the exponent operator:

    # bad
    e = M * c ** 2
    
    # good
    e = M * c**2

    { and } deserve a bit of clarification, since they are used for block and hash literals, as well as embedded expressions in strings. For hash literals two styles are considered acceptable.

    # good - space after { and before }
    { one: 1, two: 2 }
    
    # good - no space after { and before }
    {one: 1, two: 2}

    The first variant is slightly more readable (and arguably more popular in the Ruby community in general). The second variant has the advantage of adding visual difference between block and hash literals. Whichever one you pick - apply it consistently.

    As far as embedded expressions go, there are also two acceptable options:

    # good - no spaces
    "string#{expr}"
    
    # ok - arguably more readable
    "string#{ expr }"

    The first style is extremely more popular and you're generally advised to stick with it. The second, on the other hand, is (arguably) a bit more readable. As with hashes - pick one style and apply it consistently.

  • No spaces after (, [ or before ], ).

    some(arg).other
    [1, 2, 3].length
  • Indent when as deep as case. I know that many would disagree with this one, but it's the style established in both "The Ruby Programming Language" and "Programming Ruby".

    case
    when song.name == 'Misty'
      puts 'Not again!'
    when song.duration > 120
      puts 'Too long!'
    when Time.now.hour > 21
      puts "It's too late"
    else
      song.play
    end
    
    kind = case year
           when 1850..1889 then 'Blues'
           when 1890..1909 then 'Ragtime'
           when 1910..1929 then 'New Orleans Jazz'
           when 1930..1939 then 'Swing'
           when 1940..1950 then 'Bebop'
           else 'Jazz'
           end
  • Use empty lines between defs and to break up a method into logical paragraphs.

    def some_method
      data = initialize(options)
    
      data.manipulate!
    
      data.result
    end
    
    def some_method
      result
    end
  • Use spaces around the = operator when assigning default values to method parameters:

    # bad
    def some_method(arg1=:default, arg2=nil, arg3=[])
      # do something...
    end
    
    # good
    def some_method(arg1 = :default, arg2 = nil, arg3 = [])
      # do something...
    end

    While several Ruby books suggest the first style, the second is much more prominent in practice (and arguably a bit more readable).

  • Avoid line continuation \ where not required. In practice, avoid using line continuations at all.

    # bad
    result = 1 - \
             2
    
    # good (but still ugly as hell)
    result = 1 \
             - 2
  • When continuing a chained method invocation on another line keep the . on the second line.

    # bad - need to consult first line to understand second line
    one.two.three.
      four
    
    # good - it's immediately clear what's going on the second line
    one.two.three
      .four
  • Align the parameters of a method call if they span more than one line.

    # starting point (line is too long)
    def send_mail(source)
      Mailer.deliver(to: 'bob@example.com', from: 'us@example.com', subject: 'Important message', body: source.text)
    end
    
    # bad (normal indent)
    def send_mail(source)
      Mailer.deliver(
        to: 'bob@example.com',
        from: 'us@example.com',
        subject: 'Important message',
        body: source.text)
    end
    
    # bad (double indent)
    def send_mail(source)
      Mailer.deliver(
          to: 'bob@example.com',
          from: 'us@example.com',
          subject: 'Important message',
          body: source.text)
    end
    
    # good
    def send_mail(source)
      Mailer.deliver(to: 'bob@example.com',
                     from: 'us@example.com',
                     subject: 'Important message',
                     body: source.text)
    end
  • Add underscores to large numeric literals to improve their readability.

    # bad - how many 0s are there?
    num = 1000000
    
    # good - much easier to parse for the human brain
    num = 1_000_000
  • Use RDoc and its conventions for API documentation. Don't put an empty line between the comment block and the def.

  • Limit lines to 80 characters.

  • Avoid trailing whitespace.

  • Don't use block comments. They cannot be preceded by whitespace and are not as easy to spot as regular comments.

    # bad
    == begin
    comment line
    another comment line
    == end
    
    # good
    # comment line
    # another comment line

Syntax

  • Use :: only to reference constants(this includes classes and modules). Never use :: for method invocation.

    # bad
    SomeClass::some_method
    some_object::some_method
    
    # good
    SomeClass.some_method
    some_object.some_method
    SomeModule::SomeClass::SOME_CONST
  • Use def with parentheses when there are arguments. Omit the parentheses when the method doesn't accept any arguments.

    def some_method
      # body omitted
    end
    
    def some_method_with_arguments(arg1, arg2)
      # body omitted
    end
  • Never use for, unless you know exactly why. Most of the time iterators should be used instead. for is implemented in terms of each (so you're adding a level of indirection), but with a twist - for doesn't introduce a new scope (unlike each) and variables defined in its block will be visible outside it.

    arr = [1, 2, 3]
    
    # bad
    for elem in arr do
      puts elem
    end
    
    # good
    arr.each { |elem| puts elem }
  • Never use then for multi-line if/unless.

    # bad
    if some_condition then
      # body omitted
    end
    
    # good
    if some_condition
      # body omitted
    end
  • Favor the ternary operator(?:) over if/then/else/end constructs. It's more common and obviously more concise.

    # bad
    result = if some_condition then something else something_else end
    
    # good
    result = some_condition ? something : something_else
  • Use one expression per branch in a ternary operator. This also means that ternary operators must not be nested. Prefer if/else constructs in these cases.

    # bad
    some_condition ? (nested_condition ? nested_something : nested_something_else) : something_else
    
    # good
    if some_condition
      nested_condition ? nested_something : nested_something_else
    else
      something_else
    end
  • Never use if x: ... - as of Ruby 1.9 it has been removed. Use the ternary operator instead.

    # bad
    result = if some_condition: something else something_else end
    
    # good
    result = some_condition ? something : something_else
  • Never use if x; .... Use the ternary operator instead.

  • Use when x then ... for one-line cases. The alternative syntax when x: ... has been removed as of Ruby 1.9.

  • Never use when x; .... See the previous rule.

  • Use ! instead of not.

    # bad - braces are required because of op precedence
    x = (not something)
    
    # good
    x = !something
  • The and and or keywords are banned. It's just not worth it. Always use && and || instead.

    # bad
    # boolean expression
    if some_condition and some_other_condition
      do_something
    end
    
    # control flow
    document.saved? or document.save!
    
    # good
    # boolean expression
    if some_condition && some_other_condition
      do_something
    end
    
    # control flow
    document.saved? || document.save!
  • Avoid multi-line ?: (the ternary operator); use if/unless instead.

  • Favor modifier if/unless usage when you have a single-line body. Another good alternative is the usage of control flow &&/||.

    # bad
    if some_condition
      do_something
    end
    
    # good
    do_something if some_condition
    
    # another good option
    some_condition && do_something
  • Favor unless over if for negative conditions (or control flow ||).

    # bad
    do_something if !some_condition
    
    # good
    do_something unless some_condition
    
    # another good option
    some_condition || do_something
  • Never use unless with else. Rewrite these with the positive case first.

    # bad
    unless success?
      puts 'failure'
    else
      puts 'success'
    end
    
    # good
    if success?
      puts 'success'
    else
      puts 'failure'
    end
  • Don't use parentheses around the condition of an if/unless/while, unless the condition contains an assignment (see "Using the return value of =" below).

    # bad
    if (x > 10)
      # body omitted
    end
    
    # good
    if x > 10
      # body omitted
    end
    
    # ok
    if (x = self.next_value)
      # body omitted
    end
  • Favor modifier while/until usage when you have a single-line body.

    # bad
    while some_condition
      do_something
    end
    
    # good
    do_something while some_condition
  • Favor until over while for negative conditions.

    # bad
    do_something while !some_condition
    
    # good
    do_something until some_condition
  • Use Kernel#loop with break rather than begin/end/until or begin/end/while for post-loop tests.

    # bad
    begin
      puts val
      val += 1
    end while val < 0
    
    # good
    loop do
      puts val
      val += 1
      break unless val < 0
    end
  • Omit parentheses around parameters for methods that are part of an internal DSL (e.g. Rake, Rails, RSpec), methods that have "keyword" status in Ruby (e.g. attr_reader, puts) and attribute access methods. Use parentheses around the arguments of all other method invocations.

    class Person
      attr_reader :name, :age
    
      # omitted
    end
    
    temperance = Person.new('Temperance', 30)
    temperance.name
    
    puts temperance.age
    
    x = Math.sin(y)
    array.delete(e)
    
    bowling.score.should == 0
  • Prefer {...} over do...end for single-line blocks. Avoid using {...} for multi-line blocks (multiline chaining is always ugly). Always use do...end for "control flow" and "method definitions" (e.g. in Rakefiles and certain DSLs). Avoid do...end when chaining.

    names = ['Bozhidar', 'Steve', 'Sarah']
    
    # bad
    names.each do |name|
      puts name
    end
    
    # good
    names.each { |name| puts name }
    
    # bad
    names.select do |name|
      name.start_with?('S')
    end.map { |name| name.upcase }
    
    # good
    names.select { |name| name.start_with?('S') }.map { |name| name.upcase }

    Some will argue that multiline chaining would look OK with the use of {...}, but they should ask themselves - is this code really readable and can the blocks' contents be extracted into nifty methods?

  • Avoid return where not required for flow of control.

    # bad
    def some_method(some_arr)
      return some_arr.size
    end
    
    # good
    def some_method(some_arr)
      some_arr.size
    end
  • Avoid self where not required. (It is only required when calling a self write accessor.)

    # bad
    def ready?
      if self.last_reviewed_at > self.last_updated_at
        self.worker.update(self.content, self.options)
        self.status = :in_progress
      end
      self.status == :verified
    end
    
    # good
    def ready?
      if last_reviewed_at > last_updated_at
        worker.update(content, options)
        self.status = :in_progress
      end
      status == :verified
    end
  • As a corollary, avoid shadowing methods with local variables unless they are both equivalent.

    class Foo
      attr_accessor :options
    
      # ok
      def initialize(options)
        self.options = options
        # both options and self.options are equivalent here
      end
    
      # bad
      def do_something(options = {})
        unless options[:when] == :later
          output(self.options[:message])
        end
      end
    
      # good
      def do_something(params = {})
        unless params[:when] == :later
          output(options[:message])
        end
      end
    end
  • Don't use the return value of = (an assignment) in conditional expressions.

    # bad (+ a warning)
    if (v = array.grep(/foo/))
      do_something(v)
      ...
    end
    
    # bad (+ a warning)
    if v = array.grep(/foo/)
      do_something(v)
      ...
    end
    
    # good
    v = array.grep(/foo/)
    if v
      do_something(v)
      ...
    end
  • Use ||= freely to initialize variables.

    # set name to Bozhidar, only if it's nil or false
    name ||= 'Bozhidar'
  • Don't use ||= to initialize boolean variables. (Consider what would happen if the current value happened to be false.)

    # bad - would set enabled to true even if it was false
    enabled ||= true
    
    # good
    enabled = true if enabled.nil?
  • Avoid using Perl-style special variables (like $0-9, $, etc. ). They are quite cryptic and their use in anything but one-liner scripts is discouraged.

  • Never put a space between a method name and the opening parenthesis.

    # bad
    f (3 + 2) + 1
    
    # good
    f(3 + 2) + 1
  • If the first argument to a method begins with an open parenthesis, always use parentheses in the method invocation. For example, write f((3 + 2) + 1).

  • Always run the Ruby interpreter with the -w option so it will warn you if you forget either of the rules above!

  • Use the new lambda literal syntax.

    # bad
    lambda = lambda { |a, b| a + b }
    lambda.call(1, 2)
    
    # good
    lambda = ->(a, b) { a + b }
    lambda.(1, 2)
  • Use _ for unused block parameters.

    # bad
    result = hash.map { |k, v| v + 1 }
    
    # good
    result = hash.map { |_, v| v + 1 }
  • Use $stdout/$stderr/$stdin instead of STDOUT/STDERR/STDIN. STDOUT/STDERR/STDIN are constants, and while you can actually reassign (possibly to redirect some stream) constants in Ruby, you'll get an interpreter warning if you do so.

  • Use warn instead of $stderr.puts. Apart from being more concise and clear, warn allows you to suppress warnings if you need to (by setting the warn level to 0 via -W0).

  • Favor the use of sprintf over the fairly cryptic String#% method.

    # bad
    '%d %d' % [20, 10]
    # => '20 10'
    
    # good
    sprintf('%d %d', 20, 10)
    # => '20 10'
  • Favor the use of Array#join over the fairly cryptic Array#* with a string argument.

    # bad
    %w(one two three) * ', '
    # => 'one, two, three'
    
    # good
    %w(one two three).join(', ')
    # => 'one, two, three'
  • Use [*var] or Array() instead of explicit Array check, when dealing with a variable you want to treat as an Array, but you're not certain it's an array.

    # bad
    paths = [paths] unless paths.is_a? Array
    paths.each { |path| do_something(path) }
    
    # good
    [*paths].each { |path| do_something(path) }
    
    # good (and a bit more readable)
    Array(paths).each { |path| do_something(path) }
  • Use ranges instead of complex comparison logic when possible.

    # bad
    do_something if x >= 1000 && x < 2000
    
    # good
    do_something if (1000...2000).include?(x)

Naming

The only real difficulties in programming are cache invalidation and naming things.
-- Phil Karlton

  • Name identifiers in English.

    # bad - variable name written in Bulgarian with latin characters
    zaplata = 1_000
    
    # good
    salary = 1_000
  • Use snake_case for symbols, methods and variables.

    # bad
    :'some symbol'
    :SomeSymbol
    :someSymbol
    
    someVar = 5
    
    def someMethod
      ...
    end
    
    def SomeMethod
     ...
    end
    
    # good
    :some_symbol
    
    def some_method
      ...
    end
  • Use CamelCase for classes and modules. (Keep acronyms like HTTP, RFC, XML uppercase.)

    # bad
    class Someclass
      ...
    end
    
    class Some_Class
      ...
    end
    
    class SomeXml
      ...
    end
    
    # good
    class SomeClass
      ...
    end
    
    class SomeXML
      ...
    end
  • Use SCREAMING_SNAKE_CASE for other constants.

    # bad
    SomeConst = 5
    
    # good
    SOME_CONST = 5
  • The names of predicate methods (methods that return a boolean value) should end in a question mark. (i.e. Array#empty?).

  • The names of potentially dangerous methods (i.e. methods that modify self or the arguments, exit! (doesn't run the finalizers like exit does), etc.) should end with an exclamation mark if there exists a safe version of that dangerous method.

    # bad - there is not matching 'safe' method
    class Person
      def update!
      end
    end
    
    # good
    class Person
      def update
      end
    end
    
    # good
    class Person
      def update!
      end
    
      def update
      end
    end
  • Define the non-bang (safe) method in terms of the bang (dangerous) one if possible.

    class Array
      def flatten_once!
        res = []
    
        each do |e|
          [*e].each { |f| res << f }
        end
    
        replace(res)
      end
    
      def flatten_once
        dup.flatten_once!
      end
    end
  • When using reduce with short blocks, name the arguments |a, e| (accumulator, element).

  • When defining binary operators, name the argument other(<< and [] are exceptions to the rule, since their semantics are different).

    def +(other)
      # body omitted
    end
  • Prefer map over collect, find over detect, select over find_all, reduce over inject and size over length. This is not a hard requirement; if the use of the alias enhances readability, it's ok to use it. The rhyming methods are inherited from Smalltalk and are not common in other programming languages. The reason the use of select is encouraged over find_all is that it goes together nicely with reject and its name is pretty self-explanatory.

  • Use flat_map instead of map + flatten. This does not apply for arrays with a depth greater than 2, i.e. if users.first.songs == ['a', ['b','c']], then use map + flatten rather than flat_map. flat_map flattens the array by 1, whereas flatten flattens it all the way.

    # bad
    all_songs = users.map(&:songs).flatten.uniq
    
    # good
    all_songs = users.flat_map(&:songs).uniq

Comments

Good code is its own best documentation. As you're about to add a comment, ask yourself, "How can I improve the code so that this comment isn't needed?" Improve the code and then document it to make it even clearer.
-- Steve McConnell

  • Write self-documenting code and ignore the rest of this section. Seriously!

  • Write comments in English.

  • Use one space between the leading # character of the comment and the text of the comment.

  • Comments longer than a word are capitalized and use punctuation. Use one space after periods.

  • Avoid superfluous comments.

    # bad
    counter += 1 # increments counter by one
  • Keep existing comments up-to-date. An outdated comment is worse than no comment at all.

Good code is like a good joke - it needs no explanation.
-- Russ Olsen

  • Avoid writing comments to explain bad code. Refactor the code to make it self-explanatory. (Do or do not - there is no try. --Yoda)

Comment Annotations

  • Annotations should usually be written on the line immediately above the relevant code.

  • The annotation keyword is followed by a colon and a space, then a note describing the problem.

  • If multiple lines are required to describe the problem, subsequent lines should be indented two spaces after the #.

    def bar
      # FIXME: This has crashed occasionally since v3.2.1. It may
      #   be related to the BarBazUtil upgrade.
      baz(:quux)
    end
  • In cases where the problem is so obvious that any documentation would be redundant, annotations may be left at the end of the offending line with no note. This usage should be the exception and not the rule.

    def bar
      sleep 100 # OPTIMIZE
    end
  • Use TODO to note missing features or functionality that should be added at a later date.

  • Use FIXME to note broken code that needs to be fixed.

  • Use OPTIMIZE to note slow or inefficient code that may cause performance problems.

  • Use HACK to note code smells where questionable coding practices were used and should be refactored away.

  • Use REVIEW to note anything that should be looked at to confirm it is working as intended. For example: REVIEW: Are we sure this is how the client does X currently?

  • Use other custom annotation keywords if it feels appropriate, but be sure to document them in your project's README or similar.

Classes & Modules

  • Use a consistent structure in your class definitions.

    class Person
      # extend and include go first
      extend SomeModule
      include AnotherModule
    
      # constants are next
      SOME_CONSTANT = 20
    
      # afterwards we have attribute macros
      attr_reader :name
    
      # followed by other macros (if any)
      validates :name
    
      # public class methods are next in line
      def self.some_method
      end
    
      # followed by public instance methods
      def some_method
      end
    
      # protected and private methods are grouped near the end
      protected
    
      def some_protected_method
      end
    
      private
    
      def some_private_method
      end
    end
  • Prefer modules to classes with only class methods. Classes should be used only when it makes sense to create instances out of them.

    # bad
    class SomeClass
      def self.some_method
        # body omitted
      end
    
      def self.some_other_method
      end
    end
    
    # good
    module SomeClass
      module_function
    
      def some_method
        # body omitted
      end
    
      def some_other_method
      end
    end
  • Favor the use of module_function over extend self when you want to turn a module's instance methods into class methods.

    # bad
    module Utilities
      extend self
    
      def parse_something(string)
        # do stuff here
      end
    
      def other_utility_method(number, string)
        # do some more stuff
      end
    end
    
    # good
    module Utilities
      module_function
    
      def parse_something(string)
        # do stuff here
      end
    
      def other_utility_method(number, string)
        # do some more stuff
      end
    end
  • When designing class hierarchies make sure that they conform to the Liskov Substitution Principle.

  • Try to make your classes as [SOLID](http://en.wikipedia.org/wiki/SOLID_(object-oriented_design\)) as possible.

  • Always supply a proper to_s method for classes that represent domain objects.

    class Person
      attr_reader :first_name, :last_name
    
      def initialize(first_name, last_name)
        @first_name = first_name
        @last_name = last_name
      end
    
      def to_s
        "#{@first_name} #{@last_name}"
      end
    end
  • Use the attr family of functions to define trivial accessors or mutators.

    # bad
    class Person
      def initialize(first_name, last_name)
        @first_name = first_name
        @last_name = last_name
      end
    
      def first_name
        @first_name
      end
    
      def last_name
        @last_name
      end
    end
    
    # good
    class Person
      attr_reader :first_name, :last_name
    
      def initialize(first_name, last_name)
        @first_name = first_name
        @last_name = last_name
      end
    end
  • Consider using Struct.new, which defines the trivial accessors, constructor and comparison operators for you.

    # good
    class Person
      attr_reader :first_name, :last_name
    
      def initialize(first_name, last_name)
        @first_name = first_name
        @last_name = last_name
      end
    end
    
    # better
    Person = Struct.new(:first_name, :last_name) do
    end
  • Don't extend a Struct.new - it already is a new class. Extending it introduces a superfluous class level and may also introduce weird errors if the file is required multiple times.

  • Consider adding factory methods to provide additional sensible ways to create instances of a particular class.

    class Person
      def self.create(options_hash)
        # body omitted
      end
    end
  • Prefer duck-typing over inheritance.

    # bad
    class Animal
      # abstract method
      def speak
      end
    end
    
    # extend superclass
    class Duck < Animal
      def speak
        puts 'Quack! Quack'
      end
    end
    
    # extend superclass
    class Dog < Animal
      def speak
        puts 'Bau! Bau!'
      end
    end
    
    # good
    class Duck
      def speak
        puts 'Quack! Quack'
      end
    end
    
    class Dog
      def speak
        puts 'Bau! Bau!'
      end
    end
  • Avoid the usage of class (@@) variables due to their "nasty" behavior in inheritance.

    class Parent
      @@class_var = 'parent'
    
      def self.print_class_var
        puts @@class_var
      end
    end
    
    class Child < Parent
      @@class_var = 'child'
    end
    
    Parent.print_class_var # => will print "child"

    As you can see all the classes in a class hierarchy actually share one class variable. Class instance variables should usually be preferred over class variables.

  • Assign proper visibility levels to methods (private, protected) in accordance with their intended usage. Don't go off leaving everything public (which is the default). After all we're coding in Ruby now, not in Python.

  • Indent the public, protected, and private methods as much the method definitions they apply to. Leave one blank line above the visibility modifier and one blank line below in order to emphasize that it applies to all methods below it.

    class SomeClass
      def public_method
        # ...
      end
    
      private
    
      def private_method
        # ...
      end
    
      def another_private_method
        # ...
      end
    end
  • Use def self.method to define singleton methods. This makes the code easier to refactor since the class name is not repeated.

    class TestClass
      # bad
      def TestClass.some_method
        # body omitted
      end
    
      # good
      def self.some_other_method
        # body omitted
      end
    
      # Also possible and convenient when you
      # have to define many singleton methods.
      class << self
        def first_method
          # body omitted
        end
    
        def second_method_etc
          # body omitted
        end
      end
    end

Exceptions

  • Signal exceptions using the fail method. Use raise only when catching an exception and re-raising it (because here you're not failing, but explicitly and purposefully raising an exception).

    begin
      fail 'Oops';
    rescue => error
      raise if error.message != 'Oops'
    end
  • Never return from an ensure block. If you explicitly return from a method inside an ensure block, the return will take precedence over any exception being raised, and the method will return as if no exception had been raised at all. In effect, the exception will be silently thrown away.

    def foo
      begin
        fail
      ensure
        return 'very bad idea'
      end
    end
  • Use implicit begin blocks where possible.

    # bad
    def foo
      begin
        # main logic goes here
      rescue
        # failure handling goes here
      end
    end
    
    # good
    def foo
      # main logic goes here
    rescue
      # failure handling goes here
    end
  • Mitigate the proliferation of begin blocks by using contingency methods (a term coined by Avdi Grimm).

    # bad
    begin
      something_that_might_fail
    rescue IOError
      # handle IOError
    end
    
    begin
      something_else_that_might_fail
    rescue IOError
      # handle IOError
    end
    
    # good
    def with_io_error_handling
       yield
    rescue IOError
      # handle IOError
    end
    
    with_io_error_handling { something_that_might_fail }
    
    with_io_error_handling { something_else_that_might_fail }
  • Don't suppress exceptions.

    # bad
    begin
      # an exception occurs here
    rescue SomeError
      # the rescue clause does absolutely nothing
    end
    
    # bad
    do_something rescue nil
  • Avoid using rescue in its modifier form.

    # bad - this catches all StandardError exceptions
    do_something rescue nil
  • Don't use exceptions for flow of control.

    # bad
    begin
      n / d
    rescue ZeroDivisionError
      puts 'Cannot divide by 0!'
    end
    
    # good
    if d.zero?
      puts 'Cannot divide by 0!'
    else
      n / d
    end
  • Avoid rescuing the Exception class. This will trap signals and calls to exit, requiring you to kill -9 the process.

    # bad
    begin
      # calls to exit and kill signals will be caught (except kill -9)
      exit
    rescue Exception
      puts "you didn't really want to exit, right?"
      # exception handling
    end
    
    # good
    begin
      # a blind rescue rescues from StandardError, not Exception as many
      # programmers assume.
    rescue => e
      # exception handling
    end
    
    # also good
    begin
      # an exception occurs here
    
    rescue StandardError => e
      # exception handling
    end
  • Put more specific exceptions higher up the rescue chain, otherwise they'll never be rescued from.

    # bad
    begin
      # some code
    rescue Exception => e
      # some handling
    rescue StandardError => e
      # some handling
    end
    
    # good
    begin
      # some code
    rescue StandardError => e
      # some handling
    rescue Exception => e
      # some handling
    end
  • Release external resources obtained by your program in an ensure block.

    f = File.open('testfile')
    begin
      # .. process
    rescue
      # .. handle error
    ensure
      f.close unless f.nil?
    end
  • Favor the use of exceptions for the standard library over introducing new exception classes.

Collections

  • Prefer literal array and hash creation notation (unless you need to pass parameters to their constructors, that is).

    # bad
    arr = Array.new
    hash = Hash.new
    
    # good
    arr = []
    hash = {}
  • Prefer %w to the literal array syntax when you need an array of words(non-empty strings without spaces and special characters in them). Apply this rule only to arrays with two or more elements.

    # bad
    STATES = ['draft', 'open', 'closed']
    
    # good
    STATES = %w(draft open closed)
  • Prefer %i to the literal array syntax when you need an array of symbols(and you don't need to maintain Ruby 1.9 compatibility). Apply this rule only to arrays with two or more elements.

    # bad
    STATES = [:draft, :open, :closed]
    
    # good
    STATES = %i(draft open closed)
  • Avoid the creation of huge gaps in arrays.

    arr = []
    arr[100] = 1 # now you have an array with lots of nils
  • Use Set instead of Array when dealing with unique elements. Set implements a collection of unordered values with no duplicates. This is a hybrid of Array's intuitive inter-operation facilities and Hash's fast lookup.

  • Prefer symbols instead of strings as hash keys.

    # bad
    hash = { 'one' => 1, 'two' => 2, 'three' => 3 }
    
    # good
    hash = { one: 1, two: 2, three: 3 }
  • Avoid the use of mutable objects as hash keys.

  • Use the hash literal syntax when your hash keys are symbols.

    # bad
    hash = { :one => 1, :two => 2, :three => 3 }
    
    # good
    hash = { one: 1, two: 2, three: 3 }
  • Use fetch when dealing with hash keys that should be present.

    heroes = { batman: 'Bruce Wayne', superman: 'Clark Kent' }
    # bad - if we make a mistake we might not spot it right away
    heroes[:batman] # => "Bruce Wayne"
    heroes[:supermann] # => nil
    
    # good - fetch raises a KeyError making the problem obvious
    heroes.fetch(:supermann)
  • Use fetch with second argument to use a default value

    batman = { name: 'Bruce Wayne', is_evil: false }
    
    # bad - if we just use || operator with falsy value we won't get the expected result
    batman[:is_evil] || true # => true
    
    # good - fetch work correctly with falsy values
    batman.fetch(:is_evil, true) # => false
  • Rely on the fact that as of Ruby 1.9 hashes are ordered.

  • Never modify a collection while traversing it.

Strings

  • Prefer string interpolation instead of string concatenation:

    # bad
    email_with_name = user.name + ' <' + user.email + '>'
    
    # good
    email_with_name = "#{user.name} <#{user.email}>"
  • Consider padding string interpolation code with space. It more clearly sets the code apart from the string.

    "#{ user.last_name }, #{ user.first_name }"
  • Prefer single-quoted strings when you don't need string interpolation or special symbols such as \t, \n, ', etc.

    # bad
    name = "Bozhidar"
    
    # good
    name = 'Bozhidar'
  • Don't leave out {} around instance and global variables being interpolated into a string.

    class Person
      attr_reader :first_name, :last_name
    
      def initialize(first_name, last_name)
        @first_name = first_name
        @last_name = last_name
      end
    
      # bad - valid, but awkward
      def to_s
        "#@first_name #@last_name"
      end
    
      # good
      def to_s
        "#{@first_name} #{@last_name}"
      end
    end
    
    $global = 0
    # bad
    puts "$global = #$global"
    
    # good
    puts "$global = #{$global}"
  • Avoid using String#+ when you need to construct large data chunks. Instead, use String#<<. Concatenation mutates the string instance in-place and is always faster than String#+, which creates a bunch of new string objects.

    # good and also fast
    html = ''
    html << '<h1>Page title</h1>'
    
    paragraphs.each do |paragraph|
      html << "<p>#{paragraph}</p>"
    end

Regular Expressions

Some people, when confronted with a problem, think "I know, I'll use regular expressions." Now they have two problems.
-- Jamie Zawinski

  • Don't use regular expressions if you just need plain text search in string: string['text']

  • For simple constructions you can use regexp directly through string index.

    match = string[/regexp/]             # get content of matched regexp
    first_group = string[/text(grp)/, 1] # get content of captured group
    string[/text (grp)/, 1] = 'replace'  # string => 'text replace'
  • Use non-capturing groups when you don't use captured result of parentheses.

    /(first|second)/   # bad
    /(?:first|second)/ # good
  • Avoid using $1-9 as it can be hard to track what they contain. Named groups can be used instead.

    # bad
    /(regexp)/ =~ string
    ...
    process $1
    
    # good
    /(?<meaningful_var>regexp)/ =~ string
    ...
    process meaningful_var
  • Character classes have only a few special characters you should care about: ^, -, \, ], so don't escape . or brackets in [].

  • Be careful with ^ and $ as they match start/end of line, not string endings. If you want to match the whole string use: \A and \z (not to be confused with \Z which is the equivalent of /\n?\z/).

    string = "some injection\nusername"
    string[/^username$/]   # matches
    string[/\Ausername\z/] # don't match
  • Use x modifier for complex regexps. This makes them more readable and you can add some useful comments. Just be careful as spaces are ignored.

    regexp = %r{
      start         # some text
      \s            # white space char
      (group)       # first group
      (?:alt1|alt2) # some alternation
      end
    }x
  • For complex replacements sub/gsub can be used with block or hash.

Percent Literals

  • Use %()(it's a shorthand for %Q) for single-line strings which require both interpolation and embedded double-quotes. For multi-line strings, prefer heredocs.

    # bad (no interpolation needed)
    %(<div class="text">Some text</div>)
    # should be '<div class="text">Some text</div>'
    
    # bad (no double-quotes)
    %(This is #{quality} style)
    # should be "This is #{quality} style"
    
    # bad (multiple lines)
    %(<div>\n<span class="big">#{exclamation}</span>\n</div>)
    # should be a heredoc.
    
    # good (requires interpolation, has quotes, single line)
    %(<tr><td class="name">#{name}</td>)
  • Avoid %q unless you have a string with both ' and " in it. Regular string literals are more readable and should be preferred unless a lot of characters would have to be escaped in them.

    # bad
    name = %q(Bruce Wayne)
    time = %q(8 o'clock)
    question = %q("What did you say?")
    
    # good
    name = 'Bruce Wayne'
    time = "8 o'clock"
    question = '"What did you say?"'
  • Use %r only for regular expressions matching more than one '/' character.

    # bad
    %r(\s+)
    
    # still bad
    %r(^/(.*)$)
    # should be /^\/(.*)$/
    
    # good
    %r(^/blog/2011/(.*)$)
  • Avoid the use of %x unless you're going to invoke a command with backquotes in it(which is rather unlikely).

    # bad
    date = %x(date)
    
    # good
    date = `date`
    echo = %x(echo `date`)
  • Avoid the use of %s. It seems that the community has decided :"some string" is the preferred way to created a symbol with spaces in it.

  • Prefer () as delimiters for all % literals, expect %r. Given the nature of regexp in many scenarios a less command character than ( might be a better choice for a delimiter.

    # bad
    %w[one two three]
    %q{"Test's king!", John said.}
    
    # good
    %w(one tho three)
    %q{"Test's king!", John said.}

Metaprogramming

  • Avoid needless metaprogramming.

  • Do not mess around in core classes when writing libraries. (Do not monkey-patch them.)

  • The block form of class_eval is preferable to the string-interpolated form.

    • when you use the string-interpolated form, always supply __FILE__ and __LINE__, so that your backtraces make sense:

      class_eval 'def use_relative_model_naming?; true; end', __FILE__, __LINE__
    • define_method is preferable to class_eval{ def ... }

  • When using class_eval (or other eval) with string interpolation, add a comment block showing its appearance if interpolated (a practice I learned from the Rails code):

    # from activesupport/lib/active_support/core_ext/string/output_safety.rb
    UNSAFE_STRING_METHODS.each do |unsafe_method|
      if 'String'.respond_to?(unsafe_method)
        class_eval <<-EOT, __FILE__, __LINE__ + 1
          def #{unsafe_method}(*args, &block)       # def capitalize(*args, &block)
            to_str.#{unsafe_method}(*args, &block)  #   to_str.capitalize(*args, &block)
          end                                       # end
    
          def #{unsafe_method}!(*args)              # def capitalize!(*args)
            @dirty = true                           #   @dirty = true
            super                                   #   super
          end                                       # end
        EOT
      end
    end
  • avoid using method_missing for metaprogramming. Backtraces become messy; the behavior is not listed in #methods; misspelled method calls might silently work (nukes.launch_state = false). Consider using delegation, proxy, or define_method instead. If you must, use method_missing,

    • be sure to also define respond_to_missing?

    • only catch methods with a well-defined prefix, such as find_by_* -- make your code as assertive as possible.

    • call super at the end of your statement

    • delegate to assertive, non-magical methods:

      # bad
      def method_missing?(meth, *args, &block)
        if /^find_by_(?<prop>.*)/ =~ meth
          # ... lots of code to do a find_by
        else
          super
        end
      end
      
      # good
      def method_missing?(meth, *args, &block)
        if /^find_by_(?<prop>.*)/ =~ meth
          find_by(prop, *args, &block)
        else
          super
        end
      end
      
      # best of all, though, would to define_method as each findable attribute is declared

Misc

  • Write ruby -w safe code.

  • Avoid hashes as optional parameters. Does the method do too much? (Object initializers are exceptions for this rule).

  • Avoid methods longer than 10 LOC (lines of code). Ideally, most methods will be shorter than 5 LOC. Empty lines do not contribute to the relevant LOC.

  • Avoid parameter lists longer than three or four parameters.

  • If you really need "global" methods, add them to Kernel and make them private.

  • Use module instance variables instead of global variables.

    # bad
    $foo_bar = 1
    
    #good
    module Foo
      class << self
        attr_accessor :bar
      end
    end
    
    Foo.bar = 1
  • Avoid alias when alias_method will do.

  • Use OptionParser for parsing complex command line options and ruby -s for trivial command line options.

  • Code in a functional way, avoiding mutation when that makes sense.

  • Do not mutate arguments unless that is the purpose of the method.

  • Avoid more than three levels of block nesting.

  • Be consistent. In an ideal world, be consistent with these guidelines.

  • Use common sense.

Tools

Here's some tools to help you automatically check Ruby code against this guide.

RuboCop

RuboCop is a Ruby code style checker based on this style guide. RuboCop already covers a significant portion of the Guide, supports both MRI 1.9 and MRI 2.0 and has good Emacs integration.

RubyMine

RubyMine's code inspections are partially based on this guide.

Contributing

Nothing written in this guide is set in stone. It's my desire to work together with everyone interested in Ruby coding style, so that we could ultimately create a resource that will be beneficial to the entire Ruby community.

Feel free to open tickets or send pull requests with improvements. Thanks in advance for your help!

License

Creative Commons License This work is licensed under a Creative Commons Attribution 3.0 Unported License

Spread the Word

A community-driven style guide is of little use to a community that doesn't know about its existence. Tweet about the guide, share it with your friends and colleagues. Every comment, suggestion or opinion we get makes the guide just a little bit better. And we want to have the best possible guide, don't we?

Cheers,
Bozhidar

About

A community-driven Ruby coding style guide

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published