Merge tag 'usb-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a bunch of USB fixes for 4.10-rc3. Yeah, it's a lot, an
  artifact of the holiday break I think.

  Lots of gadget and the usual XHCI fixups for reported issues (one day
  that driver will calm down...) Also included are a bunch of usb-serial
  driver fixes, and for good measure, a number of much-reported MUSB
  driver issues have finally been resolved.

  All of these have been in linux-next with no reported issues"

* tag 'usb-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (72 commits)
  USB: fix problems with duplicate endpoint addresses
  usb: ohci-at91: use descriptor-based gpio APIs correctly
  usb: storage: unusual_uas: Add JMicron JMS56x to unusual device
  usb: hub: Move hub_port_disable() to fix warning if PM is disabled
  usb: musb: blackfin: add bfin_fifo_offset in bfin_ops
  usb: musb: fix compilation warning on unused function
  usb: musb: Fix trying to free already-free IRQ 4
  usb: musb: dsps: implement clear_ep_rxintr() callback
  usb: musb: core: add clear_ep_rxintr() to musb_platform_ops
  USB: serial: ti_usb_3410_5052: fix NULL-deref at open
  USB: serial: spcp8x5: fix NULL-deref at open
  USB: serial: quatech2: fix sleep-while-atomic in close
  USB: serial: pl2303: fix NULL-deref at open
  USB: serial: oti6858: fix NULL-deref at open
  USB: serial: omninet: fix NULL-derefs at open and disconnect
  USB: serial: mos7840: fix misleading interrupt-URB comment
  USB: serial: mos7840: remove unused write URB
  USB: serial: mos7840: fix NULL-deref at open
  USB: serial: mos7720: remove obsolete port initialisation
  USB: serial: mos7720: fix parallel probe
  ...

drivers/usb/core/config.c

@@ -239,6 +239,16 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
 	if (ifp->desc.bNumEndpoints >= num_ep)
 		goto skip_to_next_endpoint_or_interface_descriptor;
 
+	/* Check for duplicate endpoint addresses */
+	for (i = 0; i < ifp->desc.bNumEndpoints; ++i) {
+		if (ifp->endpoint[i].desc.bEndpointAddress ==
+		    d->bEndpointAddress) {
+			dev_warn(ddev, "config %d interface %d altsetting %d has a duplicate endpoint with address 0x%X, skipping\n",
+			    cfgno, inum, asnum, d->bEndpointAddress);
+			goto skip_to_next_endpoint_or_interface_descriptor;
+		}
+	}
+
 	endpoint = &ifp->endpoint[ifp->desc.bNumEndpoints];
 	++ifp->desc.bNumEndpoints;
 

drivers/usb/core/hub.c

@@ -103,8 +103,7 @@ EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem);
 
 static void hub_release(struct kref *kref);
 static int usb_reset_and_verify_device(struct usb_device *udev);
-static void hub_usb3_port_prepare_disable(struct usb_hub *hub,
-					  struct usb_port *port_dev);
+static int hub_port_disable(struct usb_hub *hub, int port1, int set_state);
 
 static inline char *portspeed(struct usb_hub *hub, int portstatus)
 {
@@ -902,34 +901,6 @@ static int hub_set_port_link_state(struct usb_hub *hub, int port1,
 			USB_PORT_FEAT_LINK_STATE);
 }
 
-/*
- * USB-3 does not have a similar link state as USB-2 that will avoid negotiating
- * a connection with a plugged-in cable but will signal the host when the cable
- * is unplugged. Disable remote wake and set link state to U3 for USB-3 devices
- */
-static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
-{
-	struct usb_port *port_dev = hub->ports[port1 - 1];
-	struct usb_device *hdev = hub->hdev;
-	int ret = 0;
-
-	if (!hub->error) {
-		if (hub_is_superspeed(hub->hdev)) {
-			hub_usb3_port_prepare_disable(hub, port_dev);
-			ret = hub_set_port_link_state(hub, port_dev->portnum,
-						      USB_SS_PORT_LS_U3);
-		} else {
-			ret = usb_clear_port_feature(hdev, port1,
-					USB_PORT_FEAT_ENABLE);
-		}
-	}
-	if (port_dev->child && set_state)
-		usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED);
-	if (ret && ret != -ENODEV)
-		dev_err(&port_dev->dev, "cannot disable (err = %d)\n", ret);
-	return ret;
-}
-
 /*
  * Disable a port and mark a logical connect-change event, so that some
  * time later hub_wq will disconnect() any existing usb_device on the port
@@ -4162,6 +4133,34 @@ static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port,
 
 #endif	/* CONFIG_PM */
 
+/*
+ * USB-3 does not have a similar link state as USB-2 that will avoid negotiating
+ * a connection with a plugged-in cable but will signal the host when the cable
+ * is unplugged. Disable remote wake and set link state to U3 for USB-3 devices
+ */
+static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
+{
+	struct usb_port *port_dev = hub->ports[port1 - 1];
+	struct usb_device *hdev = hub->hdev;
+	int ret = 0;
+
+	if (!hub->error) {
+		if (hub_is_superspeed(hub->hdev)) {
+			hub_usb3_port_prepare_disable(hub, port_dev);
+			ret = hub_set_port_link_state(hub, port_dev->portnum,
+						      USB_SS_PORT_LS_U3);
+		} else {
+			ret = usb_clear_port_feature(hdev, port1,
+					USB_PORT_FEAT_ENABLE);
+		}
+	}
+	if (port_dev->child && set_state)
+		usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED);
+	if (ret && ret != -ENODEV)
+		dev_err(&port_dev->dev, "cannot disable (err = %d)\n", ret);
+	return ret;
+}
+
 
 /* USB 2.0 spec, 7.1.7.3 / fig 7-29:
  *

drivers/usb/dwc2/gadget.c

@@ -3753,7 +3753,7 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep,
 		hs_ep->desc_list = dma_alloc_coherent(hsotg->dev,
 			MAX_DMA_DESC_NUM_GENERIC *
 			sizeof(struct dwc2_dma_desc),
-			&hs_ep->desc_list_dma, GFP_KERNEL);
+			&hs_ep->desc_list_dma, GFP_ATOMIC);
 		if (!hs_ep->desc_list) {
 			ret = -ENOMEM;
 			goto error2;

drivers/usb/dwc2/params.c

@@ -247,26 +247,14 @@ MODULE_DEVICE_TABLE(of, dwc2_of_match_table);
 static void dwc2_get_device_property(struct dwc2_hsotg *hsotg,
 				     char *property, u8 size, u64 *value)
 {
-	u8 val8;
-	u16 val16;
 	u32 val32;
 
 	switch (size) {
 	case 0:
 		*value = device_property_read_bool(hsotg->dev, property);
 		break;
 	case 1:
-		if (device_property_read_u8(hsotg->dev, property, &val8))
-			return;
-
-		*value = val8;
-		break;
 	case 2:
-		if (device_property_read_u16(hsotg->dev, property, &val16))
-			return;
-
-		*value = val16;
-		break;
 	case 4:
 		if (device_property_read_u32(hsotg->dev, property, &val32))
 			return;
@@ -1100,13 +1088,13 @@ static void dwc2_set_gadget_dma(struct dwc2_hsotg *hsotg)
 	/* Buffer DMA */
 	dwc2_set_param_bool(hsotg, &p->g_dma,
 			    false, "gadget-dma",
-			    true, false,
+			    dma_capable, false,
 			    dma_capable);
 
 	/* DMA Descriptor */
 	dwc2_set_param_bool(hsotg, &p->g_dma_desc, false,
 			    "gadget-dma-desc",
-			    p->g_dma, false,
+			    !!hw->dma_desc_enable, false,
 			    !!hw->dma_desc_enable);
 }
 
@@ -1130,8 +1118,14 @@ static void dwc2_set_parameters(struct dwc2_hsotg *hsotg,
 
 		dwc2_set_param_bool(hsotg, &p->host_dma,
 				    false, "host-dma",
-				    true, false,
+				    dma_capable, false,
 				    dma_capable);
+		dwc2_set_param_host_rx_fifo_size(hsotg,
+				params->host_rx_fifo_size);
+		dwc2_set_param_host_nperio_tx_fifo_size(hsotg,
+				params->host_nperio_tx_fifo_size);
+		dwc2_set_param_host_perio_tx_fifo_size(hsotg,
+				params->host_perio_tx_fifo_size);
 	}
 	dwc2_set_param_dma_desc_enable(hsotg, params->dma_desc_enable);
 	dwc2_set_param_dma_desc_fs_enable(hsotg, params->dma_desc_fs_enable);
@@ -1140,12 +1134,6 @@ static void dwc2_set_parameters(struct dwc2_hsotg *hsotg,
 			params->host_support_fs_ls_low_power);
 	dwc2_set_param_enable_dynamic_fifo(hsotg,
 			params->enable_dynamic_fifo);
-	dwc2_set_param_host_rx_fifo_size(hsotg,
-			params->host_rx_fifo_size);
-	dwc2_set_param_host_nperio_tx_fifo_size(hsotg,
-			params->host_nperio_tx_fifo_size);
-	dwc2_set_param_host_perio_tx_fifo_size(hsotg,
-			params->host_perio_tx_fifo_size);
 	dwc2_set_param_max_transfer_size(hsotg,
 			params->max_transfer_size);
 	dwc2_set_param_max_packet_count(hsotg,

drivers/usb/dwc3/core.h

@@ -45,9 +45,7 @@
 #define DWC3_XHCI_RESOURCES_NUM	2
 
 #define DWC3_SCRATCHBUF_SIZE	4096	/* each buffer is assumed to be 4KiB */
-#define DWC3_EVENT_SIZE		4	/* bytes */
-#define DWC3_EVENT_MAX_NUM	64	/* 2 events/endpoint */
-#define DWC3_EVENT_BUFFERS_SIZE	(DWC3_EVENT_SIZE * DWC3_EVENT_MAX_NUM)
+#define DWC3_EVENT_BUFFERS_SIZE	4096
 #define DWC3_EVENT_TYPE_MASK	0xfe
 
 #define DWC3_EVENT_TYPE_DEV	0
@@ -311,9 +309,8 @@
 #define DWC3_DCFG_SUPERSPEED_PLUS (5 << 0)  /* DWC_usb31 only */
 #define DWC3_DCFG_SUPERSPEED	(4 << 0)
 #define DWC3_DCFG_HIGHSPEED	(0 << 0)
-#define DWC3_DCFG_FULLSPEED2	(1 << 0)
+#define DWC3_DCFG_FULLSPEED	(1 << 0)
 #define DWC3_DCFG_LOWSPEED	(2 << 0)
-#define DWC3_DCFG_FULLSPEED1	(3 << 0)
 
 #define DWC3_DCFG_NUMP_SHIFT	17
 #define DWC3_DCFG_NUMP(n)	(((n) >> DWC3_DCFG_NUMP_SHIFT) & 0x1f)
@@ -405,9 +402,8 @@
 #define DWC3_DSTS_SUPERSPEED_PLUS	(5 << 0) /* DWC_usb31 only */
 #define DWC3_DSTS_SUPERSPEED		(4 << 0)
 #define DWC3_DSTS_HIGHSPEED		(0 << 0)
-#define DWC3_DSTS_FULLSPEED2		(1 << 0)
+#define DWC3_DSTS_FULLSPEED		(1 << 0)
 #define DWC3_DSTS_LOWSPEED		(2 << 0)
-#define DWC3_DSTS_FULLSPEED1		(3 << 0)
 
 /* Device Generic Command Register */
 #define DWC3_DGCMD_SET_LMP		0x01

drivers/usb/dwc3/dwc3-omap.c

@@ -19,6 +19,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/dwc3-omap.h>
@@ -510,7 +511,7 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 
 	/* check the DMA Status */
 	reg = dwc3_omap_readl(omap->base, USBOTGSS_SYSCONFIG);
-
+	irq_set_status_flags(omap->irq, IRQ_NOAUTOEN);
 	ret = devm_request_threaded_irq(dev, omap->irq, dwc3_omap_interrupt,
 					dwc3_omap_interrupt_thread, IRQF_SHARED,
 					"dwc3-omap", omap);
@@ -531,7 +532,7 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 	}
 
 	dwc3_omap_enable_irqs(omap);
-
+	enable_irq(omap->irq);
 	return 0;
 
 err2:
@@ -552,6 +553,7 @@ static int dwc3_omap_remove(struct platform_device *pdev)
 	extcon_unregister_notifier(omap->edev, EXTCON_USB, &omap->vbus_nb);
 	extcon_unregister_notifier(omap->edev, EXTCON_USB_HOST, &omap->id_nb);
 	dwc3_omap_disable_irqs(omap);
+	disable_irq(omap->irq);
 	of_platform_depopulate(omap->dev);
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);

drivers/usb/dwc3/dwc3-pci.c

@@ -38,6 +38,7 @@
 #define PCI_DEVICE_ID_INTEL_BXT_M		0x1aaa
 #define PCI_DEVICE_ID_INTEL_APL			0x5aaa
 #define PCI_DEVICE_ID_INTEL_KBP			0xa2b0
+#define PCI_DEVICE_ID_INTEL_GLK			0x31aa
 
 #define PCI_INTEL_BXT_DSM_UUID		"732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511"
 #define PCI_INTEL_BXT_FUNC_PMU_PWR	4
@@ -73,16 +74,6 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc)
 {
 	struct platform_device		*dwc3 = dwc->dwc3;
 	struct pci_dev			*pdev = dwc->pci;
-	int				ret;
-
-	struct property_entry sysdev_property[] = {
-		PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
-		{ },
-	};
-
-	ret = platform_device_add_properties(dwc3, sysdev_property);
-	if (ret)
-		return ret;
 
 	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
 	    pdev->device == PCI_DEVICE_ID_AMD_NL_USB) {
@@ -105,6 +96,7 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc)
 			PROPERTY_ENTRY_BOOL("snps,disable_scramble_quirk"),
 			PROPERTY_ENTRY_BOOL("snps,dis_u3_susphy_quirk"),
 			PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"),
+			PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
 			{ },
 		};
 
@@ -115,7 +107,8 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc)
 		int ret;
 
 		struct property_entry properties[] = {
-			PROPERTY_ENTRY_STRING("dr-mode", "peripheral"),
+			PROPERTY_ENTRY_STRING("dr_mode", "peripheral"),
+			PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
 			{ }
 		};
 
@@ -167,6 +160,7 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc)
 			PROPERTY_ENTRY_BOOL("snps,usb3_lpm_capable"),
 			PROPERTY_ENTRY_BOOL("snps,has-lpm-erratum"),
 			PROPERTY_ENTRY_BOOL("snps,dis_enblslpm_quirk"),
+			PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
 			{ },
 		};
 
@@ -274,6 +268,7 @@ static const struct pci_device_id dwc3_pci_id_table[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT_M), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_APL), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KBP), },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_GLK), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), },
 	{  }	/* Terminating Entry */
 };