Merge branch 'i2c/for-mergewindow' of git://git.kernel.org/pub/scm/li…

…nux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "I2C has a smaller pull reuest this time: - new driver for I2C virtio - removal of PMC SMP driver because platform is already gone - IRQ probing and DMAENGINE API cleanups - add SI metric prefix definitions to units.h - beginning of i801 refactorization - a few driver improvements" * 'i2c/for-mergewindow' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (28 commits) i2c: cadence: Implement save restore i2c: xlp9xx: fix main IRQ check i2c: mt65xx: fix IRQ check i2c: virtio: add a virtio i2c frontend driver i2c: hix5hd2: fix IRQ check i2c: s3c2410: fix IRQ check i2c: iop3xx: fix deferred probing i2c: synquacer: fix deferred probing i2c: sun6i-pw2i: Prefer strscpy over strlcpy i2c: remove dead PMC MSP TWI/SMBus/I2C driver i2c: dev: Use sysfs_emit() in "show" functions i2c: dev: Define pr_fmt() and drop duplication substrings i2c: designware: Fix indentation in the header i2c: designware: Use DIV_ROUND_CLOSEST() macro units: Add SI metric prefix definitions i2c: at91: mark PM ops as __maybe unused i2c: sh_mobile: : use proper DMAENGINE API for termination i2c: qup: : use proper DMAENGINE API for termination i2c: mxs: : use proper DMAENGINE API for termination i2c: imx: : use proper DMAENGINE API for termination ...
DX37 · Aug 31, 2021 · 871dda4 · 871dda4
2 parents 359f3d7 + 8b51a8e
commit 871dda4
Show file tree

Hide file tree

Showing 29 changed files with 467 additions and 730 deletions.
diff --git a/MAINTAINERS b/MAINTAINERS
@@ -19736,6 +19736,15 @@ S:	Maintained
 F:	include/uapi/linux/virtio_snd.h
 F:	sound/virtio/*
 
+VIRTIO I2C DRIVER
+M:	Jie Deng <jie.deng@intel.com>
+M:	Viresh Kumar <viresh.kumar@linaro.org>
+L:	linux-i2c@vger.kernel.org
+L:	virtualization@lists.linux-foundation.org
+S:	Maintained
+F:	drivers/i2c/busses/i2c-virtio.c
+F:	include/uapi/linux/virtio_i2c.h
+
 VIRTUAL BOX GUEST DEVICE DRIVER
 M:	Hans de Goede <hdegoede@redhat.com>
 M:	Arnd Bergmann <arnd@arndb.de>

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
@@ -866,15 +866,6 @@ config I2C_PCA_PLATFORM
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-pca-platform.
 
-config I2C_PMCMSP
-	tristate "PMC MSP I2C TWI Controller"
-	depends on PMC_MSP || COMPILE_TEST
-	help
-	  This driver supports the PMC TWI controller on MSP devices.
-
-	  This driver can also be built as module. If so, the module
-	  will be called i2c-pmcmsp.
-
 config I2C_PNX
 	tristate "I2C bus support for Philips PNX and NXP LPC targets"
 	depends on ARCH_LPC32XX || COMPILE_TEST
@@ -1402,4 +1393,15 @@ config I2C_FSI
 	  This driver can also be built as a module. If so, the module will be
 	  called as i2c-fsi.
 
+config I2C_VIRTIO
+        tristate "Virtio I2C Adapter"
+        select VIRTIO
+        help
+          If you say yes to this option, support will be included for the virtio
+          I2C adapter driver. The hardware can be emulated by any device model
+          software according to the virtio protocol.
+
+          This driver can also be built as a module. If so, the module
+          will be called i2c-virtio.
+
 endmenu
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
@@ -86,7 +86,6 @@ obj-$(CONFIG_I2C_OMAP)		+= i2c-omap.o
 obj-$(CONFIG_I2C_OWL)		+= i2c-owl.o
 obj-$(CONFIG_I2C_PASEMI)	+= i2c-pasemi.o
 obj-$(CONFIG_I2C_PCA_PLATFORM)	+= i2c-pca-platform.o
-obj-$(CONFIG_I2C_PMCMSP)	+= i2c-pmcmsp.o
 obj-$(CONFIG_I2C_PNX)		+= i2c-pnx.o
 obj-$(CONFIG_I2C_PXA)		+= i2c-pxa.o
 obj-$(CONFIG_I2C_PXA_PCI)	+= i2c-pxa-pci.o
@@ -146,5 +145,6 @@ obj-$(CONFIG_I2C_SIBYTE)	+= i2c-sibyte.o
 obj-$(CONFIG_I2C_XGENE_SLIMPRO) += i2c-xgene-slimpro.o
 obj-$(CONFIG_SCx200_ACB)	+= scx200_acb.o
 obj-$(CONFIG_I2C_FSI)		+= i2c-fsi.o
+obj-$(CONFIG_I2C_VIRTIO)	+= i2c-virtio.o
 
 ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG
diff --git a/drivers/i2c/busses/i2c-at91-core.c b/drivers/i2c/busses/i2c-at91-core.c
@@ -286,9 +286,7 @@ static int at91_twi_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM
-
-static int at91_twi_runtime_suspend(struct device *dev)
+static int __maybe_unused at91_twi_runtime_suspend(struct device *dev)
 {
 	struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
 
@@ -299,7 +297,7 @@ static int at91_twi_runtime_suspend(struct device *dev)
 	return 0;
 }
 
-static int at91_twi_runtime_resume(struct device *dev)
+static int __maybe_unused at91_twi_runtime_resume(struct device *dev)
 {
 	struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
 
@@ -308,15 +306,15 @@ static int at91_twi_runtime_resume(struct device *dev)
 	return clk_prepare_enable(twi_dev->clk);
 }
 
-static int at91_twi_suspend_noirq(struct device *dev)
+static int __maybe_unused at91_twi_suspend_noirq(struct device *dev)
 {
 	if (!pm_runtime_status_suspended(dev))
 		at91_twi_runtime_suspend(dev);
 
 	return 0;
 }
 
-static int at91_twi_resume_noirq(struct device *dev)
+static int __maybe_unused at91_twi_resume_noirq(struct device *dev)
 {
 	struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
 	int ret;
@@ -335,26 +333,21 @@ static int at91_twi_resume_noirq(struct device *dev)
 	return 0;
 }
 
-static const struct dev_pm_ops at91_twi_pm = {
+static const struct dev_pm_ops __maybe_unused at91_twi_pm = {
 	.suspend_noirq	= at91_twi_suspend_noirq,
 	.resume_noirq	= at91_twi_resume_noirq,
 	.runtime_suspend	= at91_twi_runtime_suspend,
 	.runtime_resume		= at91_twi_runtime_resume,
 };
 
-#define at91_twi_pm_ops (&at91_twi_pm)
-#else
-#define at91_twi_pm_ops NULL
-#endif
-
 static struct platform_driver at91_twi_driver = {
 	.probe		= at91_twi_probe,
 	.remove		= at91_twi_remove,
 	.id_table	= at91_twi_devtypes,
 	.driver		= {
 		.name	= "at91_i2c",
 		.of_match_table = of_match_ptr(atmel_twi_dt_ids),
-		.pm	= at91_twi_pm_ops,
+		.pm	= pm_ptr(&at91_twi_pm),
 	},
 };
 

diff --git a/drivers/i2c/busses/i2c-at91-master.c b/drivers/i2c/busses/i2c-at91-master.c
@@ -138,9 +138,9 @@ static void at91_twi_dma_cleanup(struct at91_twi_dev *dev)
 
 	if (dma->xfer_in_progress) {
 		if (dma->direction == DMA_FROM_DEVICE)
-			dmaengine_terminate_all(dma->chan_rx);
+			dmaengine_terminate_sync(dma->chan_rx);
 		else
-			dmaengine_terminate_all(dma->chan_tx);
+			dmaengine_terminate_sync(dma->chan_tx);
 		dma->xfer_in_progress = false;
 	}
 	if (dma->buf_mapped) {

diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
@@ -178,6 +178,7 @@ enum cdns_i2c_slave_state {
  * @clk:		Pointer to struct clk
  * @clk_rate_change_nb:	Notifier block for clock rate changes
  * @quirks:		flag for broken hold bit usage in r1p10
+ * @ctrl_reg:		Cached value of the control register.
  * @ctrl_reg_diva_divb: value of fields DIV_A and DIV_B from CR register
  * @slave:		Registered slave instance.
  * @dev_mode:		I2C operating role(master/slave).
@@ -202,6 +203,7 @@ struct cdns_i2c {
 	struct clk *clk;
 	struct notifier_block clk_rate_change_nb;
 	u32 quirks;
+	u32 ctrl_reg;
 #if IS_ENABLED(CONFIG_I2C_SLAVE)
 	u16 ctrl_reg_diva_divb;
 	struct i2c_client *slave;
@@ -1071,10 +1073,11 @@ static int cdns_i2c_setclk(unsigned long clk_in, struct cdns_i2c *id)
 	if (ret)
 		return ret;
 
-	ctrl_reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
+	ctrl_reg = id->ctrl_reg;
 	ctrl_reg &= ~(CDNS_I2C_CR_DIVA_MASK | CDNS_I2C_CR_DIVB_MASK);
 	ctrl_reg |= ((div_a << CDNS_I2C_CR_DIVA_SHIFT) |
 			(div_b << CDNS_I2C_CR_DIVB_SHIFT));
+	id->ctrl_reg = ctrl_reg;
 	cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
 #if IS_ENABLED(CONFIG_I2C_SLAVE)
 	id->ctrl_reg_diva_divb = ctrl_reg & (CDNS_I2C_CR_DIVA_MASK |
@@ -1162,6 +1165,26 @@ static int __maybe_unused cdns_i2c_runtime_suspend(struct device *dev)
 	return 0;
 }
 
+/**
+ * cdns_i2c_init -  Controller initialisation
+ * @id:		Device private data structure
+ *
+ * Initialise the i2c controller.
+ *
+ */
+static void cdns_i2c_init(struct cdns_i2c *id)
+{
+	cdns_i2c_writereg(id->ctrl_reg, CDNS_I2C_CR_OFFSET);
+	/*
+	 * Cadence I2C controller has a bug wherein it generates
+	 * invalid read transaction after HW timeout in master receiver mode.
+	 * HW timeout is not used by this driver and the interrupt is disabled.
+	 * But the feature itself cannot be disabled. Hence maximum value
+	 * is written to this register to reduce the chances of error.
+	 */
+	cdns_i2c_writereg(CDNS_I2C_TIMEOUT_MAX, CDNS_I2C_TIME_OUT_OFFSET);
+}
+
 /**
  * cdns_i2c_runtime_resume - Runtime resume
  * @dev:	Address of the platform_device structure
@@ -1180,6 +1203,7 @@ static int __maybe_unused cdns_i2c_runtime_resume(struct device *dev)
 		dev_err(dev, "Cannot enable clock.\n");
 		return ret;
 	}
+	cdns_i2c_init(xi2c);
 
 	return 0;
 }
@@ -1279,7 +1303,7 @@ static int cdns_i2c_probe(struct platform_device *pdev)
 	id->dev_mode = CDNS_I2C_MODE_MASTER;
 	id->slave_state = CDNS_I2C_SLAVE_STATE_IDLE;
 #endif
-	cdns_i2c_writereg(CDNS_I2C_CR_MASTER_EN_MASK, CDNS_I2C_CR_OFFSET);
+	id->ctrl_reg = CDNS_I2C_CR_ACK_EN | CDNS_I2C_CR_NEA | CDNS_I2C_CR_MS;
 
 	ret = cdns_i2c_setclk(id->input_clk, id);
 	if (ret) {
@@ -1294,15 +1318,7 @@ static int cdns_i2c_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "cannot get irq %d\n", id->irq);
 		goto err_clk_dis;
 	}
-
-	/*
-	 * Cadence I2C controller has a bug wherein it generates
-	 * invalid read transaction after HW timeout in master receiver mode.
-	 * HW timeout is not used by this driver and the interrupt is disabled.
-	 * But the feature itself cannot be disabled. Hence maximum value
-	 * is written to this register to reduce the chances of error.
-	 */
-	cdns_i2c_writereg(CDNS_I2C_TIMEOUT_MAX, CDNS_I2C_TIME_OUT_OFFSET);
+	cdns_i2c_init(id);
 
 	ret = i2c_add_adapter(&id->adap);
 	if (ret < 0)

diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
@@ -24,6 +24,7 @@
 #include <linux/regmap.h>
 #include <linux/swab.h>
 #include <linux/types.h>
+#include <linux/units.h>
 
 #include "i2c-designware-core.h"
 
@@ -350,7 +351,7 @@ u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)
 		 *
 		 * If your hardware is free from tHD;STA issue, try this one.
 		 */
-		return (ic_clk * tSYMBOL + 500000) / 1000000 - 8 + offset;
+		return DIV_ROUND_CLOSEST(ic_clk * tSYMBOL, MICRO) - 8 + offset;
 	else
 		/*
 		 * Conditional expression:
@@ -366,8 +367,7 @@ u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)
 		 * The reason why we need to take into account "tf" here,
 		 * is the same as described in i2c_dw_scl_lcnt().
 		 */
-		return (ic_clk * (tSYMBOL + tf) + 500000) / 1000000
-			- 3 + offset;
+		return DIV_ROUND_CLOSEST(ic_clk * (tSYMBOL + tf), MICRO) - 3 + offset;
 }
 
 u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset)
@@ -383,7 +383,7 @@ u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset)
 	 * account the fall time of SCL signal (tf).  Default tf value
 	 * should be 0.3 us, for safety.
 	 */
-	return ((ic_clk * (tLOW + tf) + 500000) / 1000000) - 1 + offset;
+	return DIV_ROUND_CLOSEST(ic_clk * (tLOW + tf), MICRO) - 1 + offset;
 }
 
 int i2c_dw_set_sda_hold(struct dw_i2c_dev *dev)

diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
@@ -117,7 +117,7 @@
 
 #define DW_IC_ERR_TX_ABRT	0x1
 
-#define DW_IC_TAR_10BITADDR_MASTER BIT(12)
+#define DW_IC_TAR_10BITADDR_MASTER	BIT(12)
 
 #define DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH	(BIT(2) | BIT(3))
 #define DW_IC_COMP_PARAM_1_SPEED_MODE_MASK	GENMASK(3, 2)
@@ -245,7 +245,7 @@ struct dw_i2c_dev {
 	struct clk		*clk;
 	struct clk		*pclk;
 	struct reset_control	*rst;
-	struct i2c_client		*slave;
+	struct i2c_client	*slave;
 	u32			(*get_clk_rate_khz) (struct dw_i2c_dev *dev);
 	int			cmd_err;
 	struct i2c_msg		*msgs;

diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -31,12 +31,13 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/suspend.h>
+#include <linux/units.h>
 
 #include "i2c-designware-core.h"
 
 static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
 {
-	return clk_get_rate(dev->clk)/1000;
+	return clk_get_rate(dev->clk) / KILO;
 }
 
 #ifdef CONFIG_ACPI
@@ -270,7 +271,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 
 		if (!dev->sda_hold_time && t->sda_hold_ns)
 			dev->sda_hold_time =
-				div_u64(clk_khz * t->sda_hold_ns + 500000, 1000000);
+				DIV_S64_ROUND_CLOSEST(clk_khz * t->sda_hold_ns, MICRO);
 	}
 
 	adap = &dev->adapter;

diff --git a/drivers/i2c/busses/i2c-highlander.c b/drivers/i2c/busses/i2c-highlander.c
@@ -379,7 +379,7 @@ static int highlander_i2c_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, dev);
 
 	dev->irq = platform_get_irq(pdev, 0);
-	if (iic_force_poll)
+	if (dev->irq < 0 || iic_force_poll)
 		dev->irq = 0;
 
 	if (dev->irq) {

diff --git a/drivers/i2c/busses/i2c-hix5hd2.c b/drivers/i2c/busses/i2c-hix5hd2.c
@@ -413,7 +413,7 @@ static int hix5hd2_i2c_probe(struct platform_device *pdev)
 		return PTR_ERR(priv->regs);
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq <= 0)
+	if (irq < 0)
 		return irq;
 
 	priv->clk = devm_clk_get(&pdev->dev, NULL);