Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) BPF verifier signed/unsigned value tracking fix, from Daniel
    Borkmann, Edward Cree, and Josef Bacik.

 2) Fix memory allocation length when setting up calls to
    ->ndo_set_mac_address, from Cong Wang.

 3) Add a new cxgb4 device ID, from Ganesh Goudar.

 4) Fix FIB refcount handling, we have to set it's initial value before
    the configure callback (which can bump it). From David Ahern.

 5) Fix double-free in qcom/emac driver, from Timur Tabi.

 6) A bunch of gcc-7 string format overflow warning fixes from Arnd
    Bergmann.

 7) Fix link level headroom tests in ip_do_fragment(), from Vasily
    Averin.

 8) Fix chunk walking in SCTP when iterating over error and parameter
    headers. From Alexander Potapenko.

 9) TCP BBR congestion control fixes from Neal Cardwell.

10) Fix SKB fragment handling in bcmgenet driver, from Doug Berger.

11) BPF_CGROUP_RUN_PROG_SOCK_OPS needs to check for null __sk, from Cong
    Wang.

12) xmit_recursion in ppp driver needs to be per-device not per-cpu,
    from Gao Feng.

13) Cannot release skb->dst in UDP if IP options processing needs it.
    From Paolo Abeni.

14) Some netdev ioctl ifr_name[] NULL termination fixes. From Alexander
    Levin and myself.

15) Revert some rtnetlink notification changes that are causing
    regressions, from David Ahern.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (83 commits)
  net: bonding: Fix transmit load balancing in balance-alb mode
  rds: Make sure updates to cp_send_gen can be observed
  net: ethernet: ti: cpsw: Push the request_irq function to the end of probe
  ipv4: initialize fib_trie prior to register_netdev_notifier call.
  rtnetlink: allocate more memory for dev_set_mac_address()
  net: dsa: b53: Add missing ARL entries for BCM53125
  bpf: more tests for mixed signed and unsigned bounds checks
  bpf: add test for mixed signed and unsigned bounds checks
  bpf: fix up test cases with mixed signed/unsigned bounds
  bpf: allow to specify log level and reduce it for test_verifier
  bpf: fix mixed signed/unsigned derived min/max value bounds
  ipv6: avoid overflow of offset in ip6_find_1stfragopt
  net: tehuti: don't process data if it has not been copied from userspace
  Revert "rtnetlink: Do not generate notifications for CHANGEADDR event"
  net: dsa: mv88e6xxx: Enable CMODE config support for 6390X
  dt-binding: ptp: Add SoC compatibility strings for dte ptp clock
  NET: dwmac: Make dwmac reset unconditional
  net: Zero terminate ifr_name in dev_ifname().
  wireless: wext: terminate ifr name coming from userspace
  netfilter: fix netfilter_net_init() return
  ...

Documentation/devicetree/bindings/net/brcm,amac.txt

@@ -11,6 +11,7 @@ Required properties:
  - reg-names:	Names of the registers.
 		"amac_base":	Address and length of the GMAC registers
 		"idm_base":	Address and length of the GMAC IDM registers
+				(required for NSP and Northstar2)
 		"nicpm_base":	Address and length of the NIC Port Manager
 				registers (required for Northstar2)
  - interrupts:	Interrupt number

Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt

@@ -1,13 +1,20 @@
-* Broadcom Digital Timing Engine(DTE) based PTP clock driver
+* Broadcom Digital Timing Engine(DTE) based PTP clock
 
 Required properties:
-- compatible: should be "brcm,ptp-dte"
+- compatible: should contain the core compatibility string
+              and the SoC compatibility string. The SoC
+              compatibility string is to handle SoC specific
+              hardware differences.
+              Core compatibility string:
+                 "brcm,ptp-dte"
+              SoC compatibility strings:
+                 "brcm,iproc-ptp-dte" - for iproc based SoC's
 - reg: address and length of the DTE block's NCO registers
 
 Example:
 
-ptp_dte: ptp_dte@180af650 {
-	compatible = "brcm,ptp-dte";
+ptp: ptp-dte@180af650 {
+	compatible = "brcm,iproc-ptp-dte", "brcm,ptp-dte";
 	reg = <0x180af650 0x10>;
 	status = "okay";
 };

drivers/atm/zatm.c

@@ -1613,7 +1613,7 @@ static int zatm_init_one(struct pci_dev *pci_dev,
 
 	ret = dma_set_mask_and_coherent(&pci_dev->dev, DMA_BIT_MASK(32));
 	if (ret < 0)
-		goto out_disable;
+		goto out_release;
 
 	zatm_dev->pci_dev = pci_dev;
 	dev->dev_data = zatm_dev;

drivers/isdn/divert/isdn_divert.c

@@ -485,18 +485,19 @@ static int isdn_divert_icall(isdn_ctrl *ic)
 				cs->deflect_dest[0] = '\0';
 				retval = 4; /* only proceed */
 			}
-			sprintf(cs->info, "%d 0x%lx %s %s %s %s 0x%x 0x%x %d %d %s\n",
-				cs->akt_state,
-				cs->divert_id,
-				divert_if.drv_to_name(cs->ics.driver),
-				(ic->command == ISDN_STAT_ICALLW) ? "1" : "0",
-				cs->ics.parm.setup.phone,
-				cs->ics.parm.setup.eazmsn,
-				cs->ics.parm.setup.si1,
-				cs->ics.parm.setup.si2,
-				cs->ics.parm.setup.screen,
-				dv->rule.waittime,
-				cs->deflect_dest);
+			snprintf(cs->info, sizeof(cs->info),
+				 "%d 0x%lx %s %s %s %s 0x%x 0x%x %d %d %s\n",
+				 cs->akt_state,
+				 cs->divert_id,
+				 divert_if.drv_to_name(cs->ics.driver),
+				 (ic->command == ISDN_STAT_ICALLW) ? "1" : "0",
+				 cs->ics.parm.setup.phone,
+				 cs->ics.parm.setup.eazmsn,
+				 cs->ics.parm.setup.si1,
+				 cs->ics.parm.setup.si2,
+				 cs->ics.parm.setup.screen,
+				 dv->rule.waittime,
+				 cs->deflect_dest);
 			if ((dv->rule.action == DEFLECT_REPORT) ||
 			    (dv->rule.action == DEFLECT_REJECT)) {
 				put_info_buffer(cs->info);

drivers/isdn/hardware/avm/c4.c

@@ -42,7 +42,7 @@ static char *revision = "$Revision: 1.1.2.2 $";
 
 static bool suppress_pollack;
 
-static struct pci_device_id c4_pci_tbl[] = {
+static const struct pci_device_id c4_pci_tbl[] = {
 	{ PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21285, PCI_VENDOR_ID_AVM, PCI_DEVICE_ID_AVM_C4, 0, 0, (unsigned long)4 },
 	{ PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21285, PCI_VENDOR_ID_AVM, PCI_DEVICE_ID_AVM_C2, 0, 0, (unsigned long)2 },
 	{ }			/* Terminating entry */

drivers/isdn/hardware/eicon/divasmain.c

@@ -110,7 +110,7 @@ typedef struct _diva_os_thread_dpc {
 /*
   This table should be sorted by PCI device ID
 */
-static struct pci_device_id divas_pci_tbl[] = {
+static const struct pci_device_id divas_pci_tbl[] = {
 	/* Diva Server BRI-2M PCI 0xE010 */
 	{ PCI_VDEVICE(EICON, PCI_DEVICE_ID_EICON_MAESTRA),
 	  CARDTYPE_MAESTRA_PCI },

drivers/isdn/hardware/mISDN/avmfritz.c

@@ -1142,7 +1142,7 @@ fritz_remove_pci(struct pci_dev *pdev)
 			pr_info("%s: drvdata already removed\n", __func__);
 }
 
-static struct pci_device_id fcpci_ids[] = {
+static const struct pci_device_id fcpci_ids[] = {
 	{ PCI_VENDOR_ID_AVM, PCI_DEVICE_ID_AVM_A1, PCI_ANY_ID, PCI_ANY_ID,
 	  0, 0, (unsigned long) "Fritz!Card PCI"},
 	{ PCI_VENDOR_ID_AVM, PCI_DEVICE_ID_AVM_A1_V2, PCI_ANY_ID, PCI_ANY_ID,

drivers/isdn/hardware/mISDN/hfcmulti.c

@@ -5348,7 +5348,7 @@ static const struct hm_map hfcm_map[] = {
 
 #undef H
 #define H(x)	((unsigned long)&hfcm_map[x])
-static struct pci_device_id hfmultipci_ids[] = {
+static const struct pci_device_id hfmultipci_ids[] = {
 
 	/* Cards with HFC-4S Chip */
 	{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,

drivers/isdn/hardware/mISDN/hfcpci.c

@@ -2161,7 +2161,7 @@ static const struct _hfc_map hfc_map[] =
 	{},
 };
 
-static struct pci_device_id hfc_ids[] =
+static const struct pci_device_id hfc_ids[] =
 {
 	{ PCI_VDEVICE(CCD, PCI_DEVICE_ID_CCD_2BD0),
 	  (unsigned long) &hfc_map[0] },

drivers/isdn/hardware/mISDN/netjet.c

@@ -1137,7 +1137,7 @@ static void nj_remove(struct pci_dev *pdev)
 /* We cannot select cards with PCI_SUB... IDs, since here are cards with
  * SUB IDs set to PCI_ANY_ID, so we need to match all and reject
  * known other cards which not work with this driver - see probe function */
-static struct pci_device_id nj_pci_ids[] = {
+static const struct pci_device_id nj_pci_ids[] = {
 	{ PCI_VENDOR_ID_TIGERJET, PCI_DEVICE_ID_TIGERJET_300,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{ }

drivers/isdn/hardware/mISDN/w6692.c

@@ -1398,7 +1398,7 @@ w6692_remove_pci(struct pci_dev *pdev)
 			pr_notice("%s: drvdata already removed\n", __func__);
 }
 
-static struct pci_device_id w6692_ids[] = {
+static const struct pci_device_id w6692_ids[] = {
 	{ PCI_VENDOR_ID_DYNALINK, PCI_DEVICE_ID_DYNALINK_IS64PH,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, (ulong)&w6692_map[0]},
 	{ PCI_VENDOR_ID_WINBOND2, PCI_DEVICE_ID_WINBOND2_6692,

drivers/isdn/hisax/config.c

@@ -1909,7 +1909,7 @@ static void EChannel_proc_rcv(struct hisax_d_if *d_if)
 #ifdef CONFIG_PCI
 #include <linux/pci.h>
 
-static struct pci_device_id hisax_pci_tbl[] __used = {
+static const struct pci_device_id hisax_pci_tbl[] __used = {
 #ifdef CONFIG_HISAX_FRITZPCI
 	{PCI_VDEVICE(AVM,      PCI_DEVICE_ID_AVM_A1)			},
 #endif

drivers/isdn/hisax/hfc4s8s_l1.c

@@ -86,7 +86,7 @@ typedef struct {
 	char *device_name;
 } hfc4s8s_param;
 
-static struct pci_device_id hfc4s8s_ids[] = {
+static const struct pci_device_id hfc4s8s_ids[] = {
 	{.vendor = PCI_VENDOR_ID_CCD,
 	 .device = PCI_DEVICE_ID_4S,
 	 .subvendor = 0x1397,

drivers/isdn/hisax/hisax_fcpcipnp.c

@@ -52,7 +52,7 @@ module_param(debug, int, 0);
 MODULE_AUTHOR("Kai Germaschewski <kai.germaschewski@gmx.de>/Karsten Keil <kkeil@suse.de>");
 MODULE_DESCRIPTION("AVM Fritz!PCI/PnP ISDN driver");
 
-static struct pci_device_id fcpci_ids[] = {
+static const struct pci_device_id fcpci_ids[] = {
 	{ .vendor      = PCI_VENDOR_ID_AVM,
 	  .device      = PCI_DEVICE_ID_AVM_A1,
 	  .subvendor   = PCI_ANY_ID,

drivers/net/bonding/bond_main.c

@@ -4596,7 +4596,7 @@ static int bond_check_params(struct bond_params *params)
 	}
 	ad_user_port_key = valptr->value;
 
-	if (bond_mode == BOND_MODE_TLB) {
+	if ((bond_mode == BOND_MODE_TLB) || (bond_mode == BOND_MODE_ALB)) {
 		bond_opt_initstr(&newval, "default");
 		valptr = bond_opt_parse(bond_opt_get(BOND_OPT_TLB_DYNAMIC_LB),
 					&newval);

drivers/net/dsa/b53/b53_common.c

@@ -1665,6 +1665,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.dev_name = "BCM53125",
 		.vlans = 4096,
 		.enabled_ports = 0xff,
+		.arl_entries = 4,
 		.cpu_port = B53_CPU_PORT,
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,

drivers/net/dsa/mv88e6xxx/chip.c

@@ -3178,6 +3178,7 @@ static const struct mv88e6xxx_ops mv88e6390x_ops = {
 	.port_set_jumbo_size = mv88e6165_port_set_jumbo_size,
 	.port_egress_rate_limiting = mv88e6097_port_egress_rate_limiting,
 	.port_pause_limit = mv88e6390_port_pause_limit,
+	.port_set_cmode = mv88e6390x_port_set_cmode,
 	.port_disable_learn_limit = mv88e6xxx_port_disable_learn_limit,
 	.port_disable_pri_override = mv88e6xxx_port_disable_pri_override,
 	.stats_snapshot = mv88e6390_g1_stats_snapshot,

drivers/net/ethernet/apm/xgene/xgene_enet_main.c

@@ -1785,16 +1785,18 @@ static int xgene_enet_get_resources(struct xgene_enet_pdata *pdata)
 
 	xgene_enet_gpiod_get(pdata);
 
-	pdata->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(pdata->clk)) {
-		/* Abort if the clock is defined but couldn't be retrived.
-		 * Always abort if the clock is missing on DT system as
-		 * the driver can't cope with this case.
-		 */
-		if (PTR_ERR(pdata->clk) != -ENOENT || dev->of_node)
-			return PTR_ERR(pdata->clk);
-		/* Firmware may have set up the clock already. */
-		dev_info(dev, "clocks have been setup already\n");
+	if (pdata->phy_mode != PHY_INTERFACE_MODE_SGMII) {
+		pdata->clk = devm_clk_get(&pdev->dev, NULL);
+		if (IS_ERR(pdata->clk)) {
+			/* Abort if the clock is defined but couldn't be
+			 * retrived. Always abort if the clock is missing on
+			 * DT system as the driver can't cope with this case.
+			 */
+			if (PTR_ERR(pdata->clk) != -ENOENT || dev->of_node)
+				return PTR_ERR(pdata->clk);
+			/* Firmware may have set up the clock already. */
+			dev_info(dev, "clocks have been setup already\n");
+		}
 	}
 
 	if (pdata->phy_mode != PHY_INTERFACE_MODE_XGMII)

drivers/net/ethernet/broadcom/bgmac-platform.c

@@ -50,11 +50,14 @@ static u32 platform_bgmac_idm_read(struct bgmac *bgmac, u16 offset)
 
 static void platform_bgmac_idm_write(struct bgmac *bgmac, u16 offset, u32 value)
 {
-	return writel(value, bgmac->plat.idm_base + offset);
+	writel(value, bgmac->plat.idm_base + offset);
 }
 
 static bool platform_bgmac_clk_enabled(struct bgmac *bgmac)
 {
+	if (!bgmac->plat.idm_base)
+		return true;
+
 	if ((bgmac_idm_read(bgmac, BCMA_IOCTL) & BGMAC_CLK_EN) != BGMAC_CLK_EN)
 		return false;
 	if (bgmac_idm_read(bgmac, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET)
@@ -66,6 +69,9 @@ static void platform_bgmac_clk_enable(struct bgmac *bgmac, u32 flags)
 {
 	u32 val;
 
+	if (!bgmac->plat.idm_base)
+		return;
+
 	/* The Reset Control register only contains a single bit to show if the
 	 * controller is currently in reset.  Do a sanity check here, just in
 	 * case the bootloader happened to leave the device in reset.
@@ -180,6 +186,7 @@ static int bgmac_probe(struct platform_device *pdev)
 	bgmac->feature_flags |= BGMAC_FEAT_CMDCFG_SR_REV4;
 	bgmac->feature_flags |= BGMAC_FEAT_TX_MASK_SETUP;
 	bgmac->feature_flags |= BGMAC_FEAT_RX_MASK_SETUP;
+	bgmac->feature_flags |= BGMAC_FEAT_IDM_MASK;
 
 	bgmac->dev = &pdev->dev;
 	bgmac->dma_dev = &pdev->dev;
@@ -207,15 +214,13 @@ static int bgmac_probe(struct platform_device *pdev)
 		return PTR_ERR(bgmac->plat.base);
 
 	regs = platform_get_resource_byname(pdev, IORESOURCE_MEM, "idm_base");
-	if (!regs) {
-		dev_err(&pdev->dev, "Unable to obtain idm resource\n");
-		return -EINVAL;
+	if (regs) {
+		bgmac->plat.idm_base = devm_ioremap_resource(&pdev->dev, regs);
+		if (IS_ERR(bgmac->plat.idm_base))
+			return PTR_ERR(bgmac->plat.idm_base);
+		bgmac->feature_flags &= ~BGMAC_FEAT_IDM_MASK;
 	}
 
-	bgmac->plat.idm_base = devm_ioremap_resource(&pdev->dev, regs);
-	if (IS_ERR(bgmac->plat.idm_base))
-		return PTR_ERR(bgmac->plat.idm_base);
-
 	regs = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nicpm_base");
 	if (regs) {
 		bgmac->plat.nicpm_base = devm_ioremap_resource(&pdev->dev,