Merge tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "These are all the driver updates for SoC specific drivers. There are a
  couple of subsystems with individual maintainers picking up their
  patches here:

   - The reset controller subsystem add support for a few new SoC
     variants to existing drivers, along with other minor improvements

   - The OP-TEE subsystem gets a driver for the ARM FF-A transport

   - The memory controller subsystem has improvements for Tegra,
     Mediatek, Renesas, Freescale and Broadcom specific drivers.

   - The tegra cpuidle driver changes get merged through this tree this
     time. There are only minor changes, but they depend on other tegra
     driver updates here.

   - The ep93xx platform finally moves to using the drivers/clk/
     subsystem, moving the code out of arch/arm in the process. This
     depends on a small sound driver change that is included here as
     well.

   - There are some minor updates for Qualcomm and Tegra specific
     firmware drivers.

  The other driver updates are mainly for drivers/soc, which contains a
  mixture of vendor specific drivers that don't really fit elsewhere:

   - Mediatek drivers gain more support for MT8192, with new support for
     hw-mutex and mmsys routing, plus support for reset lines in the
     mmsys driver.

   - Qualcomm gains a new "sleep stats" driver, and support for the
     "Generic Packet Router" in the APR driver.

   - There is a new user interface for routing the UARTS on ASpeed BMCs,
     something that apparently nobody else has needed so far.

   - More drivers can now be built as loadable modules, in particular
     for Broadcom and Samsung platforms.

   - Lots of improvements to the TI sysc driver for better
     suspend/resume support"

  Finally, there are lots of minor cleanups and new device IDs for
  amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx,
  layerscape, allwinner, broadcom, and omap"

* tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (179 commits)
  optee: Fix spelling mistake "reclain" -> "reclaim"
  Revert "firmware: qcom: scm: Add support for MC boot address API"
  qcom: spm: allow compile-testing
  firmware: arm_ffa: Remove unused 'compat_version' variable
  soc: samsung: exynos-chipid: add exynosautov9 SoC support
  firmware: qcom: scm: Don't break compile test on non-ARM platforms
  soc: qcom: smp2p: Add of_node_put() before goto
  soc: qcom: apr: Add of_node_put() before return
  soc: qcom: qcom_stats: Fix client votes offset
  soc: qcom: rpmhpd: fix sm8350_mxc's peer domain
  dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method
  ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226
  firmware: qcom: scm: Add support for MC boot address API
  soc: qcom: spm: Add 8916 SPM register data
  dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu
  soc: qcom: socinfo: Add PM8150C and SMB2351 models
  firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available()
  soc: aspeed: Add UART routing support
  soc: fsl: dpio: rename the enqueue descriptor variable
  soc: fsl: dpio: use an explicit NULL instead of 0
  ...

Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing

@@ -0,0 +1,27 @@
+What:		/sys/bus/platform/drivers/aspeed-uart-routing/*/uart*
+Date:		September 2021
+Contact:	Oskar Senft <osk@google.com>
+		Chia-Wei Wang <chiawei_wang@aspeedtech.com>
+Description:	Selects the RX source of the UARTx device.
+
+		When read, each file shows the list of available options with currently
+		selected option marked by brackets "[]". The list of available options
+		depends on the selected file.
+
+		e.g.
+		cat /sys/bus/platform/drivers/aspeed-uart-routing/*.uart_routing/uart1
+		[io1] io2 io3 io4 uart2 uart3 uart4 io6
+
+		In this case, UART1 gets its input from IO1 (physical serial port 1).
+
+Users:		OpenBMC.  Proposed changes should be mailed to
+		openbmc@lists.ozlabs.org
+
+What:		/sys/bus/platform/drivers/aspeed-uart-routing/*/io*
+Date:		September 2021
+Contact:	Oskar Senft <osk@google.com>
+		Chia-Wei Wang <chiawei_wang@aspeedtech.com>
+Description:	Selects the RX source of IOx serial port. The current selection
+		will be marked by brackets "[]".
+Users:		OpenBMC.  Proposed changes should be mailed to
+		openbmc@lists.ozlabs.org

Documentation/devicetree/bindings/arm/cpus.yaml

@@ -211,6 +211,9 @@ properties:
           - qcom,gcc-msm8660
           - qcom,kpss-acc-v1
           - qcom,kpss-acc-v2
+          - qcom,msm8226-smp
+          # Only valid on ARM 32-bit, see above for ARM v8 64-bit
+          - qcom,msm8916-smp
           - renesas,apmu
           - renesas,r9a06g032-smp
           - rockchip,rk3036-smp
@@ -297,7 +300,8 @@ properties:
       Specifies the ACC* node associated with this CPU.
 
       Required for systems that have an "enable-method" property
-      value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2"
+      value of "qcom,kpss-acc-v1", "qcom,kpss-acc-v2", "qcom,msm8226-smp" or
+      "qcom,msm8916-smp".
 
       * arm/msm/qcom,kpss-acc.txt
 

Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml

@@ -11,8 +11,9 @@ maintainers:
 
 properties:
   compatible:
-    items:
-      - const: samsung,exynos4210-chipid
+    enum:
+      - samsung,exynos4210-chipid
+      - samsung,exynos850-chipid
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/display/msm/dp-controller.yaml

@@ -102,7 +102,6 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
-    #include <dt-bindings/power/qcom-aoss-qmp.h>
     #include <dt-bindings/power/qcom-rpmpd.h>
 
     displayport-controller@ae90000 {

Documentation/devicetree/bindings/firmware/qcom,scm.txt

@@ -13,8 +13,10 @@ Required properties:
  * "qcom,scm-ipq806x"
  * "qcom,scm-ipq8074"
  * "qcom,scm-mdm9607"
+ * "qcom,scm-msm8226"
  * "qcom,scm-msm8660"
  * "qcom,scm-msm8916"
+ * "qcom,scm-msm8953"
  * "qcom,scm-msm8960"
  * "qcom,scm-msm8974"
  * "qcom,scm-msm8994"
@@ -33,7 +35,7 @@ Required properties:
  * core clock required for "qcom,scm-apq8064", "qcom,scm-msm8660" and
    "qcom,scm-msm8960"
  * core, iface and bus clocks required for "qcom,scm-apq8084",
-   "qcom,scm-msm8916" and "qcom,scm-msm8974"
+   "qcom,scm-msm8916", "qcom,scm-msm8953" and "qcom,scm-msm8974"
 - clock-names: Must contain "core" for the core clock, "iface" for the interface
   clock and "bus" for the bus clock per the requirements of the compatible.
 - qcom,dload-mode: phandle to the TCSR hardware block and offset of the