Merge branch 'WIP.x86/asm' into x86/urgent, because the topic is ready

Signed-off-by: Ingo Molnar <mingo@kernel.org>

.mailmap

@@ -62,6 +62,7 @@ Frank Zago <fzago@systemfabricworks.com>
 Greg Kroah-Hartman <greg@echidna.(none)>
 Greg Kroah-Hartman <gregkh@suse.de>
 Greg Kroah-Hartman <greg@kroah.com>
+Gregory CLEMENT <gregory.clement@bootlin.com> <gregory.clement@free-electrons.com>
 Henk Vergonet <Henk.Vergonet@gmail.com>
 Henrik Kretzschmar <henne@nachtwindheim.de>
 Henrik Rydberg <rydberg@bitmath.org>

CREDITS

@@ -1564,6 +1564,11 @@ W: http://www.carumba.com/
 D: bug toaster (A1 sauce makes all the difference)
 D: Random linux hacker
 
+N: James Hogan
+E: jhogan@kernel.org
+D: Metag architecture maintainer
+D: TZ1090 SoC maintainer
+
 N: Tim Hockin
 E: thockin@hockin.org
 W: http://www.hockin.org/~thockin

Documentation/00-INDEX

@@ -66,8 +66,6 @@ backlight/
 	- directory with info on controlling backlights in flat panel displays
 bcache.txt
 	- Block-layer cache on fast SSDs to improve slow (raid) I/O performance.
-blackfin/
-	- directory with documentation for the Blackfin arch.
 block/
 	- info on the Block I/O (BIO) layer.
 blockdev/
@@ -114,8 +112,6 @@ cputopology.txt
 	- documentation on how CPU topology info is exported via sysfs.
 crc32.txt
 	- brief tutorial on CRC computation
-cris/
-	- directory with info about Linux on CRIS architecture.
 crypto/
 	- directory with info on the Crypto API.
 dcdbas.txt
@@ -172,8 +168,6 @@ fmc/
 	- information about the FMC bus abstraction
 fpga/
 	- FPGA Manager Core.
-frv/
-	- Fujitsu FR-V Linux documentation.
 futex-requeue-pi.txt
 	- info on requeueing of tasks from a non-PI futex to a PI futex
 gcc-plugins.txt
@@ -276,8 +270,6 @@ memory-hotplug.txt
 	- Hotpluggable memory support, how to use and current status.
 men-chameleon-bus.txt
 	- info on MEN chameleon bus.
-metag/
-	- directory with info about Linux on Meta architecture.
 mic/
 	- Intel Many Integrated Core (MIC) architecture device driver.
 mips/
@@ -286,8 +278,6 @@ misc-devices/
 	- directory with info about devices using the misc dev subsystem
 mmc/
 	- directory with info about the MMC subsystem
-mn10300/
-	- directory with info about the mn10300 architecture port
 mtd/
 	- directory with info about memory technology devices (flash)
 namespaces/

Documentation/ABI/testing/sysfs-ata

@@ -1,110 +1,139 @@
 What:		/sys/class/ata_...
-Date:		August 2008
-Contact:	Gwendal Grignou<gwendal@google.com>
 Description:
-
-Provide a place in sysfs for storing the ATA topology of the system.  This allows
-retrieving various information about ATA objects.
+		Provide a place in sysfs for storing the ATA topology of the
+		system. This allows retrieving various information about ATA
+		objects.
 
 Files under /sys/class/ata_port
 -------------------------------
 
-	For each port, a directory ataX is created where X is the ata_port_id of
-	the port. The device parent is the ata host device.
+For each port, a directory ataX is created where X is the ata_port_id of the
+port. The device parent is the ata host device.
 
-idle_irq (read)
 
-	Number of IRQ received by the port while idle [some ata HBA only].
+What:		/sys/class/ata_port/ataX/nr_pmp_links
+What:		/sys/class/ata_port/ataX/idle_irq
+Date:		May, 2010
+KernelVersion:	v2.6.37
+Contact:	Gwendal Grignou <gwendal@chromium.org>
+Description:
+		nr_pmp_links:	(RO) If a SATA Port Multiplier (PM) is
+				connected, the number of links behind it.
 
-nr_pmp_links (read)
+		idle_irq:	(RO) Number of IRQ received by the port while
+				idle [some ata HBA only].
 
-	If a SATA Port Multiplier (PM) is connected, number of link behind it.
+
+What:		/sys/class/ata_port/ataX/port_no
+Date:		May, 2013
+KernelVersion:	v3.11
+Contact:	Gwendal Grignou <gwendal@chromium.org>
+Description:
+		(RO) Host local port number. While registering host controller,
+		port numbers are tracked based upon number of ports available on
+		the controller. This attribute is needed by udev for composing
+		persistent links in /dev/disk/by-path.
 
 Files under /sys/class/ata_link
 -------------------------------
 
-	Behind each port, there is a ata_link. If there is a SATA PM in the
-	topology, 15 ata_link objects are created.
-
-	If a link is behind a port, the directory name is linkX, where X is
-	ata_port_id of the port.
-	If a link is behind a PM, its name is linkX.Y where X is ata_port_id
-	of the parent port and Y the PM port.
+Behind each port, there is a ata_link. If there is a SATA PM in the topology, 15
+ata_link objects are created.
 
-hw_sata_spd_limit
+If a link is behind a port, the directory name is linkX, where X is ata_port_id
+of the port. If a link is behind a PM, its name is linkX.Y where X is
+ata_port_id of the parent port and Y the PM port.
 
-	Maximum speed supported by the connected SATA device.
 
-sata_spd_limit
+What:		/sys/class/ata_link/linkX[.Y]/hw_sata_spd_limit
+What:		/sys/class/ata_link/linkX[.Y]/sata_spd_limit
+What:		/sys/class/ata_link/linkX[.Y]/sata_spd
+Date:		May, 2010
+KernelVersion:	v2.6.37
+Contact:	Gwendal Grignou <gwendal@chromium.org>
+Description:
+		hw_sata_spd_limit:	(RO) Maximum speed supported by the
+					connected SATA device.
 
-	Maximum speed imposed by libata.
+		sata_spd_limit:		(RO) Maximum speed imposed by libata.
 
-sata_spd
+		sata_spd:		(RO) Current speed of the link
+					eg. 1.5, 3 Gbps etc.
 
-	Current speed of the link [1.5, 3Gps,...].
 
 Files under /sys/class/ata_device
 ---------------------------------
 
-	Behind each link, up to two ata device are created.
-	The name of the directory is devX[.Y].Z where:
-	- X is ata_port_id of the port where the device is connected,
-	- Y the port of the PM if any, and
-	- Z the device id: for PATA, there is usually 2 devices [0,1],
-	only 1 for SATA.
-
-class
-	Device class. Can be "ata" for disk, "atapi" for packet device,
-	"pmp" for PM, or "none" if no device was found behind the link.
-
-dma_mode
+Behind each link, up to two ata devices are created.
+The name of the directory is devX[.Y].Z where:
+- X is ata_port_id of the port where the device is connected,
+- Y the port of the PM if any, and
+- Z the device id: for PATA, there is usually 2 devices [0,1], only 1 for SATA.
+
+
+What:		/sys/class/ata_device/devX[.Y].Z/spdn_cnt
+What:		/sys/class/ata_device/devX[.Y].Z/gscr
+What:		/sys/class/ata_device/devX[.Y].Z/ering
+What:		/sys/class/ata_device/devX[.Y].Z/id
+What:		/sys/class/ata_device/devX[.Y].Z/pio_mode
+What:		/sys/class/ata_device/devX[.Y].Z/xfer_mode
+What:		/sys/class/ata_device/devX[.Y].Z/dma_mode
+What:		/sys/class/ata_device/devX[.Y].Z/class
+Date:		May, 2010
+KernelVersion:	v2.6.37
+Contact:	Gwendal Grignou <gwendal@chromium.org>
+Description:
+		spdn_cnt:	(RO) Number of times libata decided to lower the
+				speed of link due to errors.
 
-	Transfer modes supported by the device when in DMA mode.
-	Mostly used by PATA device.
+		gscr:		(RO) Cached result of the dump of PM GSCR
+				register. Valid registers are:
 
-pio_mode
+				0:      SATA_PMP_GSCR_PROD_ID,
+				1:	SATA_PMP_GSCR_REV,
+				2:      SATA_PMP_GSCR_PORT_INFO,
+				32:     SATA_PMP_GSCR_ERROR,
+				33:     SATA_PMP_GSCR_ERROR_EN,
+				64:     SATA_PMP_GSCR_FEAT,
+				96:     SATA_PMP_GSCR_FEAT_EN,
+				130:    SATA_PMP_GSCR_SII_GPIO
 
-	Transfer modes supported by the device when in PIO mode.
-	Mostly used by PATA device.
+				Only valid if the device is a PM.
 
-xfer_mode
+		ering:		(RO) Formatted output of the error ring of the
+				device.
 
-	Current transfer mode.
+		id:		(RO) Cached result of IDENTIFY command, as
+				described in ATA8 7.16 and 7.17. Only valid if
+				the device is not a PM.
 
-id
+		pio_mode:	(RO) Transfer modes supported by the device when
+				in PIO mode. Mostly used by PATA device.
 
-	Cached result of IDENTIFY command, as described in ATA8 7.16 and 7.17.
-	Only valid if the device is not a PM.
+		xfer_mode:	(RO) Current transfer mode
 
-gscr
+		dma_mode:	(RO) Transfer modes supported by the device when
+				in DMA mode. Mostly used by PATA device.
 
-	Cached result of the dump of PM GSCR register.
-	Valid registers are:
-	0: 	SATA_PMP_GSCR_PROD_ID,
-	1: 	SATA_PMP_GSCR_REV,
-	2: 	SATA_PMP_GSCR_PORT_INFO,
-	32:	SATA_PMP_GSCR_ERROR,
-	33:	SATA_PMP_GSCR_ERROR_EN,
-	64:	SATA_PMP_GSCR_FEAT,
-	96:	SATA_PMP_GSCR_FEAT_EN,
-	130:	SATA_PMP_GSCR_SII_GPIO
-	Only valid if the device is a PM.
+		class:		(RO) Device class. Can be "ata" for disk,
+				"atapi" for packet device, "pmp" for PM, or
+				"none" if no device was found behind the link.
 
-trim
 
-	Shows the DSM TRIM mode currently used by the device. Valid
-	values are:
-	unsupported:		Drive does not support DSM TRIM
-	unqueued:		Drive supports unqueued DSM TRIM only
-	queued:			Drive supports queued DSM TRIM
-	forced_unqueued:	Drive's queued DSM support is known to be
-				buggy and only unqueued TRIM commands
-				are sent
+What:		/sys/class/ata_device/devX[.Y].Z/trim
+Date:		May, 2015
+KernelVersion:	v4.10
+Contact:	Gwendal Grignou <gwendal@chromium.org>
+Description:
+		(RO) Shows the DSM TRIM mode currently used by the device. Valid
+		values are:
 
-spdn_cnt
+		unsupported:		Drive does not support DSM TRIM
 
-	Number of time libata decided to lower the speed of link due to errors.
+		unqueued:               Drive supports unqueued DSM TRIM only
 
-ering
+		queued:                 Drive supports queued DSM TRIM
 
-	Formatted output of the error ring of the device.
+		forced_unqueued:	Drive's queued DSM support is known to
+					be buggy and only unqueued TRIM commands
+					are sent

Documentation/ABI/testing/sysfs-block-device

@@ -0,0 +1,58 @@
+What:		/sys/block/*/device/sw_activity
+Date:		Jun, 2008
+KernelVersion:	v2.6.27
+Contact:	linux-ide@vger.kernel.org
+Description:
+		(RW) Used by drivers which support software controlled activity
+		LEDs.
+
+		It has the following valid values:
+
+		0	OFF - the LED is not activated on activity
+		1	BLINK_ON - the LED blinks on every 10ms when activity is
+			detected.
+		2	BLINK_OFF - the LED is on when idle, and blinks off
+			every 10ms when activity is detected.
+
+		Note that the user must turn sw_activity OFF it they wish to
+		control the activity LED via the em_message file.
+
+
+What:		/sys/block/*/device/unload_heads
+Date:		Sep, 2008
+KernelVersion:	v2.6.28
+Contact:	linux-ide@vger.kernel.org
+Description:
+		(RW) Hard disk shock protection
+
+		Writing an integer value to this file will take the heads of the
+		respective drive off the platter and block all I/O operations
+		for the specified number of milliseconds.
+
+		- If the device does not support the unload heads feature,
+		  access is denied with -EOPNOTSUPP.
+		- The maximal value accepted for a timeout is 30000
+		  milliseconds.
+		- A previously set timeout can be cancelled and disk can resume
+		  normal operation immediately by specifying a timeout of 0.
+		- Some hard drives only comply with an earlier version of the
+		  ATA standard, but support the unload feature nonetheless.
+		  There is no safe way Linux can detect these devices, so this
+		  is not enabled by default. If it is known that your device
+		  does support the unload feature, then you can tell the kernel
+		  to enable it by writing -1. It can be disabled again by
+		  writing -2.
+		- Values below -2 are rejected with -EINVAL
+
+		For more information, see
+		Documentation/laptops/disk-shock-protection.txt
+
+
+What:		/sys/block/*/device/ncq_prio_enable
+Date:		Oct, 2016
+KernelVersion:	v4.10
+Contact:	linux-ide@vger.kernel.org
+Description:
+		(RW) Write to the file to turn on or off the SATA ncq (native
+		command queueing) support. By default this feature is turned
+		off.