Merge branches 'acerhdf', 'acpi-pci-bind', 'bjorn-pci-root', 'bugzill…

…a-12904', 'bugzilla-13121', 'bugzilla-13396', 'bugzilla-13533', 'bugzilla-13612', 'c3_lock', 'hid-cleanups', 'misc-2.6.31', 'pdc-leak-fix', 'pnpacpi', 'power_nocheck', 'thinkpad_acpi', 'video' and 'wmi' into release

Documentation/kernel-parameters.txt

@@ -229,14 +229,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			to assume that this machine's pmtimer latches its value
 			and always returns good values.
 
- 	acpi.power_nocheck=	[HW,ACPI]
- 			Format: 1/0 enable/disable the check of power state.
- 			On some bogus BIOS the _PSC object/_STA object of
- 			power resource can't return the correct device power
- 			state. In such case it is unneccessary to check its
- 			power state again in power transition.
- 			1 : disable the power state check
-
 	acpi_sci=	[HW,ACPI] ACPI System Control Interrupt trigger mode
 			Format: { level | edge | high | low }
 

Documentation/laptops/thinkpad-acpi.txt

@@ -920,7 +920,7 @@ The available commands are:
 	echo '<LED number> off' >/proc/acpi/ibm/led
 	echo '<LED number> blink' >/proc/acpi/ibm/led
 
-The <LED number> range is 0 to 7. The set of LEDs that can be
+The <LED number> range is 0 to 15. The set of LEDs that can be
 controlled varies from model to model. Here is the common ThinkPad
 mapping:
 
@@ -932,6 +932,11 @@ mapping:
 	5 - UltraBase battery slot
 	6 - (unknown)
 	7 - standby
+	8 - dock status 1
+	9 - dock status 2
+	10, 11 - (unknown)
+	12 - thinkvantage
+	13, 14, 15 - (unknown)
 
 All of the above can be turned on and off and can be made to blink.
 
@@ -940,10 +945,12 @@ sysfs notes:
 The ThinkPad LED sysfs interface is described in detail by the LED class
 documentation, in Documentation/leds-class.txt.
 
-The leds are named (in LED ID order, from 0 to 7):
+The LEDs are named (in LED ID order, from 0 to 12):
 "tpacpi::power", "tpacpi:orange:batt", "tpacpi:green:batt",
 "tpacpi::dock_active", "tpacpi::bay_active", "tpacpi::dock_batt",
-"tpacpi::unknown_led", "tpacpi::standby".
+"tpacpi::unknown_led", "tpacpi::standby", "tpacpi::dock_status1",
+"tpacpi::dock_status2", "tpacpi::unknown_led2", "tpacpi::unknown_led3",
+"tpacpi::thinkvantage".
 
 Due to limitations in the sysfs LED class, if the status of the LED
 indicators cannot be read due to an error, thinkpad-acpi will report it as
@@ -958,6 +965,12 @@ ThinkPad indicator LED should blink in hardware accelerated mode, use the
 "timer" trigger, and leave the delay_on and delay_off parameters set to
 zero (to request hardware acceleration autodetection).
 
+LEDs that are known not to exist in a given ThinkPad model are not
+made available through the sysfs interface.  If you have a dock and you
+notice there are LEDs listed for your ThinkPad that do not exist (and
+are not in the dock), or if you notice that there are missing LEDs,
+a report to ibm-acpi-devel@lists.sourceforge.net is appreciated.
+
 
 ACPI sounds -- /proc/acpi/ibm/beep
 ----------------------------------
@@ -1156,17 +1169,19 @@ may not be distinct.  Later Lenovo models that implement the ACPI
 display backlight brightness control methods have 16 levels, ranging
 from 0 to 15.
 
-There are two interfaces to the firmware for direct brightness control,
-EC and UCMS (or CMOS).  To select which one should be used, use the
-brightness_mode module parameter: brightness_mode=1 selects EC mode,
-brightness_mode=2 selects UCMS mode, brightness_mode=3 selects EC
-mode with NVRAM backing (so that brightness changes are remembered
-across shutdown/reboot).
+For IBM ThinkPads, there are two interfaces to the firmware for direct
+brightness control, EC and UCMS (or CMOS).  To select which one should be
+used, use the brightness_mode module parameter: brightness_mode=1 selects
+EC mode, brightness_mode=2 selects UCMS mode, brightness_mode=3 selects EC
+mode with NVRAM backing (so that brightness changes are remembered across
+shutdown/reboot).
 
 The driver tries to select which interface to use from a table of
 defaults for each ThinkPad model.  If it makes a wrong choice, please
 report this as a bug, so that we can fix it.
 
+Lenovo ThinkPads only support brightness_mode=2 (UCMS).
+
 When display backlight brightness controls are available through the
 standard ACPI interface, it is best to use it instead of this direct
 ThinkPad-specific interface.  The driver will disable its native
@@ -1254,7 +1269,7 @@ Fan control and monitoring: fan speed, fan enable/disable
 
 procfs: /proc/acpi/ibm/fan
 sysfs device attributes: (hwmon "thinkpad") fan1_input, pwm1,
-			  pwm1_enable
+			  pwm1_enable, fan2_input
 sysfs hwmon driver attributes: fan_watchdog
 
 NOTE NOTE NOTE: fan control operations are disabled by default for
@@ -1267,6 +1282,9 @@ from the hardware registers of the embedded controller.  This is known
 to work on later R, T, X and Z series ThinkPads but may show a bogus
 value on other models.
 
+Some Lenovo ThinkPads support a secondary fan.  This fan cannot be
+controlled separately, it shares the main fan control.
+
 Fan levels:
 
 Most ThinkPad fans work in "levels" at the firmware interface.  Level 0
@@ -1397,6 +1415,11 @@ hwmon device attribute fan1_input:
 	which can take up to two minutes.  May return rubbish on older
 	ThinkPads.
 
+hwmon device attribute fan2_input:
+	Fan tachometer reading, in RPM, for the secondary fan.
+	Available only on some ThinkPads.  If the secondary fan is
+	not installed, will always read 0.
+
 hwmon driver attribute fan_watchdog:
 	Fan safety watchdog timer interval, in seconds.  Minimum is
 	1 second, maximum is 120 seconds.  0 disables the watchdog.
@@ -1555,3 +1578,7 @@ Sysfs interface changelog:
 0x020300:	hotkey enable/disable support removed, attributes
 		hotkey_bios_enabled and hotkey_enable deprecated and
 		marked for removal.
+
+0x020400:	Marker for 16 LEDs support.  Also, LEDs that are known
+		to not exist in a given model are not registered with
+		the LED sysfs class anymore.

MAINTAINERS

@@ -230,6 +230,13 @@ L:	linux-acenic@sunsite.dk
 S:	Maintained
 F:	drivers/net/acenic*
 
+ACER ASPIRE ONE TEMPERATURE AND FAN DRIVER
+P: Peter Feuerer
+M: peter@piie.net
+W: http://piie.net/?section=acerhdf
+S: Maintained
+F: drivers/platform/x86/acerhdf.c
+
 ACER WMI LAPTOP EXTRAS
 P:	Carlos Corbacho
 M:	carlos@strangeworlds.co.uk

arch/ia64/kernel/acpi-processor.c

@@ -71,3 +71,15 @@ void arch_acpi_processor_init_pdc(struct acpi_processor *pr)
 }
 
 EXPORT_SYMBOL(arch_acpi_processor_init_pdc);
+
+void arch_acpi_processor_cleanup_pdc(struct acpi_processor *pr)
+{
+	if (pr->pdc) {
+		kfree(pr->pdc->pointer->buffer.pointer);
+		kfree(pr->pdc->pointer);
+		kfree(pr->pdc);
+		pr->pdc = NULL;
+	}
+}
+
+EXPORT_SYMBOL(arch_acpi_processor_cleanup_pdc);

arch/x86/include/asm/acpi.h

@@ -144,6 +144,7 @@ static inline unsigned int acpi_processor_cstate_check(unsigned int max_cstate)
 
 #else /* !CONFIG_ACPI */
 
+#define acpi_disabled 1
 #define acpi_lapic 0
 #define acpi_ioapic 0
 static inline void acpi_noirq_set(void) { }

arch/x86/include/asm/pci_x86.h

@@ -121,6 +121,9 @@ extern int __init pcibios_init(void);
 extern int __init pci_mmcfg_arch_init(void);
 extern void __init pci_mmcfg_arch_free(void);
 
+extern struct acpi_mcfg_allocation *pci_mmcfg_config;
+extern int pci_mmcfg_config_num;
+
 /*
  * AMD Fam10h CPUs are buggy, and cannot access MMIO config space
  * on their northbrige except through the * %eax register. As such, you MUST

arch/x86/kernel/acpi/boot.c

@@ -44,11 +44,7 @@
 
 static int __initdata acpi_force = 0;
 u32 acpi_rsdt_forced;
-#ifdef	CONFIG_ACPI
-int acpi_disabled = 0;
-#else
-int acpi_disabled = 1;
-#endif
+int acpi_disabled;
 EXPORT_SYMBOL(acpi_disabled);
 
 #ifdef	CONFIG_X86_64
@@ -122,72 +118,6 @@ void __init __acpi_unmap_table(char *map, unsigned long size)
 	early_iounmap(map, size);
 }
 
-#ifdef CONFIG_PCI_MMCONFIG
-
-static int acpi_mcfg_64bit_base_addr __initdata = FALSE;
-
-/* The physical address of the MMCONFIG aperture.  Set from ACPI tables. */
-struct acpi_mcfg_allocation *pci_mmcfg_config;
-int pci_mmcfg_config_num;
-
-static int __init acpi_mcfg_oem_check(struct acpi_table_mcfg *mcfg)
-{
-	if (!strcmp(mcfg->header.oem_id, "SGI"))
-		acpi_mcfg_64bit_base_addr = TRUE;
-
-	return 0;
-}
-
-int __init acpi_parse_mcfg(struct acpi_table_header *header)
-{
-	struct acpi_table_mcfg *mcfg;
-	unsigned long i;
-	int config_size;
-
-	if (!header)
-		return -EINVAL;
-
-	mcfg = (struct acpi_table_mcfg *)header;
-
-	/* how many config structures do we have */
-	pci_mmcfg_config_num = 0;
-	i = header->length - sizeof(struct acpi_table_mcfg);
-	while (i >= sizeof(struct acpi_mcfg_allocation)) {
-		++pci_mmcfg_config_num;
-		i -= sizeof(struct acpi_mcfg_allocation);
-	};
-	if (pci_mmcfg_config_num == 0) {
-		printk(KERN_ERR PREFIX "MMCONFIG has no entries\n");
-		return -ENODEV;
-	}
-
-	config_size = pci_mmcfg_config_num * sizeof(*pci_mmcfg_config);
-	pci_mmcfg_config = kmalloc(config_size, GFP_KERNEL);
-	if (!pci_mmcfg_config) {
-		printk(KERN_WARNING PREFIX
-		       "No memory for MCFG config tables\n");
-		return -ENOMEM;
-	}
-
-	memcpy(pci_mmcfg_config, &mcfg[1], config_size);
-
-	acpi_mcfg_oem_check(mcfg);
-
-	for (i = 0; i < pci_mmcfg_config_num; ++i) {
-		if ((pci_mmcfg_config[i].address > 0xFFFFFFFF) &&
-		    !acpi_mcfg_64bit_base_addr) {
-			printk(KERN_ERR PREFIX
-			       "MMCONFIG not in low 4GB of memory\n");
-			kfree(pci_mmcfg_config);
-			pci_mmcfg_config_num = 0;
-			return -ENODEV;
-		}
-	}
-
-	return 0;
-}
-#endif				/* CONFIG_PCI_MMCONFIG */
-
 #ifdef CONFIG_X86_LOCAL_APIC
 static int __init acpi_parse_madt(struct acpi_table_header *table)
 {
@@ -1517,14 +1447,6 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = {
 		     DMI_MATCH(DMI_PRODUCT_NAME, "Workstation W8000"),
 		     },
 	 },
-	{
-	 .callback = force_acpi_ht,
-	 .ident = "ASUS P4B266",
-	 .matches = {
-		     DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
-		     DMI_MATCH(DMI_BOARD_NAME, "P4B266"),
-		     },
-	 },
 	{
 	 .callback = force_acpi_ht,
 	 .ident = "ASUS P2B-DS",

arch/x86/kernel/acpi/cstate.c

@@ -34,12 +34,22 @@ void acpi_processor_power_init_bm_check(struct acpi_processor_flags *flags,
 		flags->bm_check = 1;
 	else if (c->x86_vendor == X86_VENDOR_INTEL) {
 		/*
-		 * Today all CPUs that support C3 share cache.
-		 * TBD: This needs to look at cache shared map, once
-		 * multi-core detection patch makes to the base.
+		 * Today all MP CPUs that support C3 share cache.
+		 * And caches should not be flushed by software while
+		 * entering C3 type state.
 		 */
 		flags->bm_check = 1;
 	}
+
+	/*
+	 * On all recent Intel platforms, ARB_DISABLE is a nop.
+	 * So, set bm_control to zero to indicate that ARB_DISABLE
+	 * is not required while entering C3 type state on
+	 * P4, Core and beyond CPUs
+	 */
+	if (c->x86_vendor == X86_VENDOR_INTEL &&
+	    (c->x86 > 0x6 || (c->x86 == 6 && c->x86_model >= 14)))
+			flags->bm_control = 0;
 }
 EXPORT_SYMBOL(acpi_processor_power_init_bm_check);
 

arch/x86/kernel/acpi/processor.c

@@ -72,6 +72,7 @@ static void init_intel_pdc(struct acpi_processor *pr, struct cpuinfo_x86 *c)
 	return;
 }
 
+
 /* Initialize _PDC data based on the CPU vendor */
 void arch_acpi_processor_init_pdc(struct acpi_processor *pr)
 {
@@ -85,3 +86,15 @@ void arch_acpi_processor_init_pdc(struct acpi_processor *pr)
 }
 
 EXPORT_SYMBOL(arch_acpi_processor_init_pdc);
+
+void arch_acpi_processor_cleanup_pdc(struct acpi_processor *pr)
+{
+	if (pr->pdc) {
+		kfree(pr->pdc->pointer->buffer.pointer);
+		kfree(pr->pdc->pointer);
+		kfree(pr->pdc);
+		pr->pdc = NULL;
+	}
+}
+
+EXPORT_SYMBOL(arch_acpi_processor_cleanup_pdc);