Informations, tips, tweaks and mods about and for the 3D FDM printer Anycubic Kobra Go and Neo to get off better from the start.
Hi and welcome to my little page about the Anycubic Kobra Go and Kobra Neo.
I am a newbie to 3D printing and got a Kobra Neo from a friend of mine. As it came with some problems and needed a bit of tinker love, I was trying to find informations and tips specifically about the Neo - it turned out that it wasn't an easy mission as it's pretty new to the Kobra family. So I thought it might be a good idea to document my tinkering and collect informations and tips about the Go and Neo (as they are basically the same) to facilitate other newbies like me an easier start right away.
If you'd like to contribute - please let me know. Especially for the Go I don't really have any content yet, so if you'd e.g. send me certain pictures taht would already be very helpful.
You don't necessarily need a GitHub account for it if you don't want to register here for free, just send me an email to
3dneo (at) quantentunnel.de
and we'll figure something out.
I hope you'll find some useful informations around here - so: happy tinkering and printing!
| Disclaimer |
|---|
| All informations, tips, instructions, suggestions, mods and so on which could be found here should be considered as a base for your own further research, especially because I'm NO expert by all means! It can't be guaranteed that everything is correct and that it wouldn't harm your printer or even yourself! So please be aware of the fact that you use everything at your own risk! I'm not responsible in any way if any damage occurs! Neither am I resposible for any content that I've linked to as a further source of informations! |