Experimenting with this incredible low-priced WS2812b 241-LED disk.
I found that feeding it enough power required some work. When the inner rings are starved for power they behave erratically. The wiring shipped with the 241-LED disk, connected daisy chain, doesn't work reliably with the breadboard power scheme I used in the past for the 93-LED disks. I soldered in the sort of bus bar connections I used in the graduation cap project and now all the LEDs behave reliably: https://github.com/Mark-MDO47/ESP32WS2812bClock/blob/main/images/LED_241_busPower.jpg
Dimensions of the disk are here: https://github.com/Mark-MDO47/ESP32WS2812bClock/blob/main/images/LED_241_Dimensions.jpg
With 241 LEDs, the RAM requirements exceed my old standby of Arduino Nano. I chose the ESP32.
Parts List so far