Release Kernel Source Of Redmi 3s Prime #238
Comments
Goayandi
pushed a commit
to Goayandi/android_kernel_xiaomi_cappu
that referenced
this issue
Aug 12, 2018
[ Upstream commit c42a0e2 ] We met NULL pointer BUG as follow: [ 151.760358] BUG: unable to handle kernel NULL pointer dereference at 0000000000000060 [ 151.761340] PGD 80000001011eb067 P4D 80000001011eb067 PUD 1011ea067 PMD 0 [ 151.762039] Oops: 0000 [MiCode#1] SMP PTI [ 151.762406] Modules linked in: [ 151.762723] CPU: 2 PID: 3561 Comm: mdadm-test Kdump: loaded Not tainted 4.17.0-rc1+ MiCode#238 [ 151.763542] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc26 04/01/2014 [ 151.764432] RIP: 0010:remove_and_add_spares.part.56+0x13c/0x3a0 [ 151.765061] RSP: 0018:ffffc90001d7fcd8 EFLAGS: 00010246 [ 151.765590] RAX: 0000000000000000 RBX: ffff88013601d600 RCX: 0000000000000000 [ 151.766306] RDX: 0000000000000000 RSI: ffff88013601d600 RDI: ffff880136187000 [ 151.767014] RBP: ffff880136187018 R08: 0000000000000003 R09: 0000000000000051 [ 151.767728] R10: ffffc90001d7fed8 R11: 0000000000000000 R12: ffff88013601d600 [ 151.768447] R13: ffff8801298b1300 R14: ffff880136187000 R15: 0000000000000000 [ 151.769160] FS: 00007f2624276700(0000) GS:ffff88013ae80000(0000) knlGS:0000000000000000 [ 151.769971] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 151.770554] CR2: 0000000000000060 CR3: 0000000111aac000 CR4: 00000000000006e0 [ 151.771272] Call Trace: [ 151.771542] md_ioctl+0x1df2/0x1e10 [ 151.771906] ? __switch_to+0x129/0x440 [ 151.772295] ? __schedule+0x244/0x850 [ 151.772672] blkdev_ioctl+0x4bd/0x970 [ 151.773048] block_ioctl+0x39/0x40 [ 151.773402] do_vfs_ioctl+0xa4/0x610 [ 151.773770] ? dput.part.23+0x87/0x100 [ 151.774151] ksys_ioctl+0x70/0x80 [ 151.774493] __x64_sys_ioctl+0x16/0x20 [ 151.774877] do_syscall_64+0x5b/0x180 [ 151.775258] entry_SYSCALL_64_after_hwframe+0x44/0xa9 For raid6, when two disk of the array are offline, two spare disks can be added into the array. Before spare disks recovery completing, system reboot and mdadm thinks it is ok to restart the degraded array by md_ioctl(). Since disks in raid6 is not only_parity(), raid5_run() will abort, when there is no PPL feature or not setting 'start_dirty_degraded' parameter. Therefore, mddev->pers is NULL. But, mddev->raid_disks has been set and it will not be cleared when raid5_run abort. md_ioctl() can execute cmd 'HOT_REMOVE_DISK' to remove a disk by mdadm, which will cause NULL pointer dereference in remove_and_add_spares() finally. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Goayandi
pushed a commit
to Goayandi/android_kernel_xiaomi_cappu
that referenced
this issue
Aug 13, 2018
[ Upstream commit c42a0e2 ] We met NULL pointer BUG as follow: [ 151.760358] BUG: unable to handle kernel NULL pointer dereference at 0000000000000060 [ 151.761340] PGD 80000001011eb067 P4D 80000001011eb067 PUD 1011ea067 PMD 0 [ 151.762039] Oops: 0000 [MiCode#1] SMP PTI [ 151.762406] Modules linked in: [ 151.762723] CPU: 2 PID: 3561 Comm: mdadm-test Kdump: loaded Not tainted 4.17.0-rc1+ MiCode#238 [ 151.763542] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc26 04/01/2014 [ 151.764432] RIP: 0010:remove_and_add_spares.part.56+0x13c/0x3a0 [ 151.765061] RSP: 0018:ffffc90001d7fcd8 EFLAGS: 00010246 [ 151.765590] RAX: 0000000000000000 RBX: ffff88013601d600 RCX: 0000000000000000 [ 151.766306] RDX: 0000000000000000 RSI: ffff88013601d600 RDI: ffff880136187000 [ 151.767014] RBP: ffff880136187018 R08: 0000000000000003 R09: 0000000000000051 [ 151.767728] R10: ffffc90001d7fed8 R11: 0000000000000000 R12: ffff88013601d600 [ 151.768447] R13: ffff8801298b1300 R14: ffff880136187000 R15: 0000000000000000 [ 151.769160] FS: 00007f2624276700(0000) GS:ffff88013ae80000(0000) knlGS:0000000000000000 [ 151.769971] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 151.770554] CR2: 0000000000000060 CR3: 0000000111aac000 CR4: 00000000000006e0 [ 151.771272] Call Trace: [ 151.771542] md_ioctl+0x1df2/0x1e10 [ 151.771906] ? __switch_to+0x129/0x440 [ 151.772295] ? __schedule+0x244/0x850 [ 151.772672] blkdev_ioctl+0x4bd/0x970 [ 151.773048] block_ioctl+0x39/0x40 [ 151.773402] do_vfs_ioctl+0xa4/0x610 [ 151.773770] ? dput.part.23+0x87/0x100 [ 151.774151] ksys_ioctl+0x70/0x80 [ 151.774493] __x64_sys_ioctl+0x16/0x20 [ 151.774877] do_syscall_64+0x5b/0x180 [ 151.775258] entry_SYSCALL_64_after_hwframe+0x44/0xa9 For raid6, when two disk of the array are offline, two spare disks can be added into the array. Before spare disks recovery completing, system reboot and mdadm thinks it is ok to restart the degraded array by md_ioctl(). Since disks in raid6 is not only_parity(), raid5_run() will abort, when there is no PPL feature or not setting 'start_dirty_degraded' parameter. Therefore, mddev->pers is NULL. But, mddev->raid_disks has been set and it will not be cleared when raid5_run abort. md_ioctl() can execute cmd 'HOT_REMOVE_DISK' to remove a disk by mdadm, which will cause NULL pointer dereference in remove_and_add_spares() finally. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pix106
pushed a commit
to pix106/android_kernel_xiaomi
that referenced
this issue
Mar 2, 2020
…riptors commit 68035c8 upstream. Way back in 2017, fuzzing the 4.14-rc2 USB stack with syzkaller kicked up the following WARNING from the UVC chain scanning code: | list_add double add: new=ffff880069084010, prev=ffff880069084010, | next=ffff880067d22298. | ------------[ cut here ]------------ | WARNING: CPU: 1 PID: 1846 at lib/list_debug.c:31 __list_add_valid+0xbd/0xf0 | Modules linked in: | CPU: 1 PID: 1846 Comm: kworker/1:2 Not tainted | 4.14.0-rc2-42613-g1488251d1a98 MiCode#238 | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 | Workqueue: usb_hub_wq hub_event | task: ffff88006b01ca40 task.stack: ffff880064358000 | RIP: 0010:__list_add_valid+0xbd/0xf0 lib/list_debug.c:29 | RSP: 0018:ffff88006435ddd0 EFLAGS: 00010286 | RAX: 0000000000000058 RBX: ffff880067d22298 RCX: 0000000000000000 | RDX: 0000000000000058 RSI: ffffffff85a58800 RDI: ffffed000c86bbac | RBP: ffff88006435dde8 R08: 1ffff1000c86ba52 R09: 0000000000000000 | R10: 0000000000000002 R11: 0000000000000000 R12: ffff880069084010 | R13: ffff880067d22298 R14: ffff880069084010 R15: ffff880067d222a0 | FS: 0000000000000000(0000) GS:ffff88006c900000(0000) knlGS:0000000000000000 | CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 | CR2: 0000000020004ff2 CR3: 000000006b447000 CR4: 00000000000006e0 | Call Trace: | __list_add ./include/linux/list.h:59 | list_add_tail+0x8c/0x1b0 ./include/linux/list.h:92 | uvc_scan_chain_forward.isra.8+0x373/0x416 | drivers/media/usb/uvc/uvc_driver.c:1471 | uvc_scan_chain drivers/media/usb/uvc/uvc_driver.c:1585 | uvc_scan_device drivers/media/usb/uvc/uvc_driver.c:1769 | uvc_probe+0x77f2/0x8f00 drivers/media/usb/uvc/uvc_driver.c:2104 Looking into the output from usbmon, the interesting part is the following data packet: ffff880069c63e00 30710169 C Ci:1:002:0 0 143 = 09028f00 01030080 00090403 00000e01 00000924 03000103 7c003328 010204db If we drop the lead configuration and interface descriptors, we're left with an output terminal descriptor describing a generic display: /* Output terminal descriptor */ buf[0] 09 buf[1] 24 buf[2] 03 /* UVC_VC_OUTPUT_TERMINAL */ buf[3] 00 /* ID */ buf[4] 01 /* type == 0x0301 (UVC_OTT_DISPLAY) */ buf[5] 03 buf[6] 7c buf[7] 00 /* source ID refers to self! */ buf[8] 33 The problem with this descriptor is that it is self-referential: the source ID of 0 matches itself! This causes the 'struct uvc_entity' representing the display to be added to its chain list twice during 'uvc_scan_chain()': once via 'uvc_scan_chain_entity()' when it is processed directly from the 'dev->entities' list and then again immediately afterwards when trying to follow the source ID in 'uvc_scan_chain_forward()' Add a check before adding an entity to a chain list to ensure that the entity is not already part of a chain. Link: https://lore.kernel.org/linux-media/CAAeHK+z+Si69jUR+N-SjN9q4O+o5KFiNManqEa-PjUta7EOb7A@mail.gmail.com/ Cc: <stable@vger.kernel.org> Fixes: c0efd23 ("V4L/DVB (8145a): USB Video Class driver") Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pix106
pushed a commit
to pix106/android_kernel_xiaomi
that referenced
this issue
May 11, 2020
commit 98397fc upstream. Original implementation commit e54bcde ("arm64: eBPF JIT compiler") had the relevant code paths, but due to an oversight always fail jiting. As a result, we had been falling back to BPF interpreter whenever a BPF program has JMP_JSET_{X,K} instructions. With this fix, we confirm that the corresponding tests in lib/test_bpf continue to pass, and also jited. ... [ 2.784553] test_bpf: MiCode#30 JSET jited:1 188 192 197 PASS [ 2.791373] test_bpf: MiCode#31 tcpdump port 22 jited:1 325 677 625 PASS [ 2.808800] test_bpf: MiCode#32 tcpdump complex jited:1 323 731 991 PASS ... [ 3.190759] test_bpf: MiCode#237 JMP_JSET_K: if (0x3 & 0x2) return 1 jited:1 110 PASS [ 3.192524] test_bpf: MiCode#238 JMP_JSET_K: if (0x3 & 0xffffffff) return 1 jited:1 98 PASS [ 3.211014] test_bpf: MiCode#249 JMP_JSET_X: if (0x3 & 0x2) return 1 jited:1 120 PASS [ 3.212973] test_bpf: MiCode#250 JMP_JSET_X: if (0x3 & 0xffffffff) return 1 jited:1 89 PASS ... Fixes: e54bcde ("arm64: eBPF JIT compiler") Signed-off-by: Zi Shen Lim <zlim.lnx@gmail.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Yang Shi <yang.shi@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pix106
pushed a commit
to pix106/android_kernel_xiaomi
that referenced
this issue
Oct 18, 2020
…riptors Way back in 2017, fuzzing the 4.14-rc2 USB stack with syzkaller kicked up the following WARNING from the UVC chain scanning code: | list_add double add: new=ffff880069084010, prev=ffff880069084010, | next=ffff880067d22298. | ------------[ cut here ]------------ | WARNING: CPU: 1 PID: 1846 at lib/list_debug.c:31 __list_add_valid+0xbd/0xf0 | Modules linked in: | CPU: 1 PID: 1846 Comm: kworker/1:2 Not tainted | 4.14.0-rc2-42613-g1488251d1a98 MiCode#238 | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 | Workqueue: usb_hub_wq hub_event | task: ffff88006b01ca40 task.stack: ffff880064358000 | RIP: 0010:__list_add_valid+0xbd/0xf0 lib/list_debug.c:29 | RSP: 0018:ffff88006435ddd0 EFLAGS: 00010286 | RAX: 0000000000000058 RBX: ffff880067d22298 RCX: 0000000000000000 | RDX: 0000000000000058 RSI: ffffffff85a58800 RDI: ffffed000c86bbac | RBP: ffff88006435dde8 R08: 1ffff1000c86ba52 R09: 0000000000000000 | R10: 0000000000000002 R11: 0000000000000000 R12: ffff880069084010 | R13: ffff880067d22298 R14: ffff880069084010 R15: ffff880067d222a0 | FS: 0000000000000000(0000) GS:ffff88006c900000(0000) knlGS:0000000000000000 | CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 | CR2: 0000000020004ff2 CR3: 000000006b447000 CR4: 00000000000006e0 | Call Trace: | __list_add ./include/linux/list.h:59 | list_add_tail+0x8c/0x1b0 ./include/linux/list.h:92 | uvc_scan_chain_forward.isra.8+0x373/0x416 | drivers/media/usb/uvc/uvc_driver.c:1471 | uvc_scan_chain drivers/media/usb/uvc/uvc_driver.c:1585 | uvc_scan_device drivers/media/usb/uvc/uvc_driver.c:1769 | uvc_probe+0x77f2/0x8f00 drivers/media/usb/uvc/uvc_driver.c:2104 Looking into the output from usbmon, the interesting part is the following data packet: ffff880069c63e00 30710169 C Ci:1:002:0 0 143 = 09028f00 01030080 00090403 00000e01 00000924 03000103 7c003328 010204db If we drop the lead configuration and interface descriptors, we're left with an output terminal descriptor describing a generic display: /* Output terminal descriptor */ buf[0] 09 buf[1] 24 buf[2] 03 /* UVC_VC_OUTPUT_TERMINAL */ buf[3] 00 /* ID */ buf[4] 01 /* type == 0x0301 (UVC_OTT_DISPLAY) */ buf[5] 03 buf[6] 7c buf[7] 00 /* source ID refers to self! */ buf[8] 33 The problem with this descriptor is that it is self-referential: the source ID of 0 matches itself! This causes the 'struct uvc_entity' representing the display to be added to its chain list twice during 'uvc_scan_chain()': once via 'uvc_scan_chain_entity()' when it is processed directly from the 'dev->entities' list and then again immediately afterwards when trying to follow the source ID in 'uvc_scan_chain_forward()' Add a check before adding an entity to a chain list to ensure that the entity is not already part of a chain. Link: https://lore.kernel.org/linux-media/CAAeHK+z+Si69jUR+N-SjN9q4O+o5KFiNManqEa-PjUta7EOb7A@mail.gmail.com/. Cc: <stable@vger.kernel.org> Fixes: c0efd23 ("V4L/DVB (8145a): USB Video Class driver") Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Change-Id: Id077b7f8ded442bf35ae3d8b459ec8c9104b2967 Git-repo: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git Git-commit: 68035c8 Signed-off-by: Alam Md Danish <amddan@codeaurora.org>
mi-code
pushed a commit
that referenced
this issue
Nov 20, 2020
media: uvcvideo: Avoid cyclic entity chains due to malformed USB descriptors Way back in 2017, fuzzing the 4.14-rc2 USB stack with syzkaller kicked up the following WARNING from the UVC chain scanning code: | list_add double add: new=ffff880069084010, prev=ffff880069084010, | next=ffff880067d22298. | ------------[ cut here ]------------ | WARNING: CPU: 1 PID: 1846 at lib/list_debug.c:31 __list_add_valid+0xbd/0xf0 | Modules linked in | CPU: 1 PID: 1846 Comm: kworker/1:2 Not tainted | 4.14.0-rc2-42613-g1488251d1a98 #238 | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 | Workqueue: usb_hub_wq hub_event | task: ffff88006b01ca40 task.stack: ffff880064358000 | RIP: 0010:__list_add_valid+0xbd/0xf0 lib/list_debug.c:29 | RSP: 0018:ffff88006435ddd0 EFLAGS: 00010286 | RAX: 0000000000000058 RBX: ffff880067d22298 RCX: 0000000000000000 | RDX: 0000000000000058 RSI: ffffffff85a58800 RDI: ffffed000c86bbac | RBP: ffff88006435dde8 R08: 1ffff1000c86ba52 R09: 0000000000000000 | R10: 0000000000000002 R11: 0000000000000000 R12: ffff880069084010 | R13: ffff880067d22298 R14: ffff880069084010 R15: ffff880067d222a0 | FS: 0000000000000000(0000) GS:ffff88006c900000(0000) knlGS:0000000000000000 | CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 | CR2: 0000000020004ff2 CR3: 000000006b447000 CR4: 00000000000006e0 | Call Trace: | __list_add ./include/linux/list.h:59 | list_add_tail+0x8c/0x1b0 ./include/linux/list.h:92 | uvc_scan_chain_forward.isra.8+0x373/0x416 | drivers/media/usb/uvc/uvc_driver.c:1471 | uvc_scan_chain drivers/media/usb/uvc/uvc_driver.c:1585 | uvc_scan_device drivers/media/usb/uvc/uvc_driver.c:1769 | uvc_probe+0x77f2/0x8f00 drivers/media/usb/uvc/uvc_driver.c:2104 Looking into the output from usbmon, the interesting part is the following data packet: ffff880069c63e00 30710169 C Ci:1:002:0 0 143 = 09028f00 01030080 00090403 00000e01 00000924 03000103 7c003328 010204db If we drop the lead configuration and interface descriptors, we're left with an output terminal descriptor describing a generic display: /* Output terminal descriptor */ buf[0] 09 buf[1] 24 buf[2] 03 /* UVC_VC_OUTPUT_TERMINAL */ buf[3] 00 /* ID */ buf[4] 01 /* type == 0x0301 (UVC_OTT_DISPLAY) */ buf[5] 03 buf[6] 7c buf[7] 00 /* source ID refers to self! */ buf[8] 33 The problem with this descriptor is that it is self-referential: the source ID of 0 matches itself! This causes the 'struct uvc_entity' representing the display to be added to its chain list twice during 'uvc_scan_chain()': once via 'uvc_scan_chain_entity()' when it is processed directly from the 'dev->entities' list and then again immediately afterwards when trying to follow the source ID in 'uvc_scan_chain_forward()' Add a check before adding an entity to a chain list to ensure that the entity is not already part of a chain. Change-Id: I8269b6f99795b23576012e67f19a006c17c886e3
pascua28
pushed a commit
to pascua28/msm-4.14-copy
that referenced
this issue
May 1, 2021
…riptors commit 68035c8 upstream. Way back in 2017, fuzzing the 4.14-rc2 USB stack with syzkaller kicked up the following WARNING from the UVC chain scanning code: | list_add double add: new=ffff880069084010, prev=ffff880069084010, | next=ffff880067d22298. | ------------[ cut here ]------------ | WARNING: CPU: 1 PID: 1846 at lib/list_debug.c:31 __list_add_valid+0xbd/0xf0 | Modules linked in: | CPU: 1 PID: 1846 Comm: kworker/1:2 Not tainted | 4.14.0-rc2-42613-g1488251d1a98 MiCode#238 | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 | Workqueue: usb_hub_wq hub_event | task: ffff88006b01ca40 task.stack: ffff880064358000 | RIP: 0010:__list_add_valid+0xbd/0xf0 lib/list_debug.c:29 | RSP: 0018:ffff88006435ddd0 EFLAGS: 00010286 | RAX: 0000000000000058 RBX: ffff880067d22298 RCX: 0000000000000000 | RDX: 0000000000000058 RSI: ffffffff85a58800 RDI: ffffed000c86bbac | RBP: ffff88006435dde8 R08: 1ffff1000c86ba52 R09: 0000000000000000 | R10: 0000000000000002 R11: 0000000000000000 R12: ffff880069084010 | R13: ffff880067d22298 R14: ffff880069084010 R15: ffff880067d222a0 | FS: 0000000000000000(0000) GS:ffff88006c900000(0000) knlGS:0000000000000000 | CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 | CR2: 0000000020004ff2 CR3: 000000006b447000 CR4: 00000000000006e0 | Call Trace: | __list_add ./include/linux/list.h:59 | list_add_tail+0x8c/0x1b0 ./include/linux/list.h:92 | uvc_scan_chain_forward.isra.8+0x373/0x416 | drivers/media/usb/uvc/uvc_driver.c:1471 | uvc_scan_chain drivers/media/usb/uvc/uvc_driver.c:1585 | uvc_scan_device drivers/media/usb/uvc/uvc_driver.c:1769 | uvc_probe+0x77f2/0x8f00 drivers/media/usb/uvc/uvc_driver.c:2104 Looking into the output from usbmon, the interesting part is the following data packet: ffff880069c63e00 30710169 C Ci:1:002:0 0 143 = 09028f00 01030080 00090403 00000e01 00000924 03000103 7c003328 010204db If we drop the lead configuration and interface descriptors, we're left with an output terminal descriptor describing a generic display: /* Output terminal descriptor */ buf[0] 09 buf[1] 24 buf[2] 03 /* UVC_VC_OUTPUT_TERMINAL */ buf[3] 00 /* ID */ buf[4] 01 /* type == 0x0301 (UVC_OTT_DISPLAY) */ buf[5] 03 buf[6] 7c buf[7] 00 /* source ID refers to self! */ buf[8] 33 The problem with this descriptor is that it is self-referential: the source ID of 0 matches itself! This causes the 'struct uvc_entity' representing the display to be added to its chain list twice during 'uvc_scan_chain()': once via 'uvc_scan_chain_entity()' when it is processed directly from the 'dev->entities' list and then again immediately afterwards when trying to follow the source ID in 'uvc_scan_chain_forward()' Add a check before adding an entity to a chain list to ensure that the entity is not already part of a chain. Link: https://lore.kernel.org/linux-media/CAAeHK+z+Si69jUR+N-SjN9q4O+o5KFiNManqEa-PjUta7EOb7A@mail.gmail.com/ Cc: <stable@vger.kernel.org> Fixes: c0efd23 ("V4L/DVB (8145a): USB Video Class driver") Change-Id: I838d373590d2ad8722cb3e5fbf044bf497d22938 Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Git-commit: 68035c8 Git-Repo: https://android.googlesource.com/kernel/common/ Signed-off-by: Rohith Kollalsi <rkollals@codeaurora.org>
mi-code
pushed a commit
that referenced
this issue
Dec 28, 2021
Original implementation commit e54bcde ("arm64: eBPF JIT compiler") had the relevant code paths, but due to an oversight always fail jiting. As a result, we had been falling back to BPF interpreter whenever a BPF program has JMP_JSET_{X,K} instructions. With this fix, we confirm that the corresponding tests in lib/test_bpf continue to pass, and also jited. ... [ 2.784553] test_bpf: #30 JSET jited:1 188 192 197 PASS [ 2.791373] test_bpf: #31 tcpdump port 22 jited:1 325 677 625 PASS [ 2.808800] test_bpf: #32 tcpdump complex jited:1 323 731 991 PASS ... [ 3.190759] test_bpf: #237 JMP_JSET_K: if (0x3 & 0x2) return 1 jited:1 110 PASS [ 3.192524] test_bpf: #238 JMP_JSET_K: if (0x3 & 0xffffffff) return 1 jited:1 98 PASS [ 3.211014] test_bpf: #249 JMP_JSET_X: if (0x3 & 0x2) return 1 jited:1 120 PASS [ 3.212973] test_bpf: #250 JMP_JSET_X: if (0x3 & 0xffffffff) return 1 jited:1 89 PASS ... Fixes: e54bcde ("arm64: eBPF JIT compiler") Signed-off-by: Zi Shen Lim <zlim.lnx@gmail.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Yang Shi <yang.shi@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
No description provided.
The text was updated successfully, but these errors were encountered: