AutoRunCE XCSoar | AutoRunCE Main Dialog | AutoRunCE Vario Settings |
---|---|---|
build serial variometer and upload firmware
Build informations | ./ATMega328P-AU/Readme.md |
Firmware with bootloader | ./Firmware/SerialVariometer.with_bootloader.hex |
Firmware without bootloader | ./Firmware/SerialVariometer.hex |
Open the BikePilot2+ and Install Serilal Variometer.
Assembly |
---|
Prepare the USB stick and insert the device (BikePilot2+).
copy ./Firmware/AutoRunCE.exe into root folder from USB stick |
copy ./Firmware/AutoRunCE.ini into root folder from USB stick |
copy ./Firmware/XCSoar.exe or www.xcsoar.org/Downloads into XCSoarData folder from USB stick |
First NMEA port / GPS signal | XCSoar gets GPS signal from COM0: (Bikepilot internal GPS). |
Second NMEA port / pressure | AutoRunCE blocks serial variometer port (COM4 ) and forwards it to XCSoar via UDP broadcast on port 8882, BlueFly protocol should be used here. |