Innosent iSYS-6030 is a 60Ghz radar with very narrow FOV (6°) and a range up to 40 meters. Please, read datasheet.
The code send start acquisition command, than reads the measures in single target mode. A complete list of commands set can be found in API readme.
- Connect GPIO 16 (RX) to TX Pin of ISYS-6030
- Connect GPIO 17 (TX) to RX Pin of iSYS-6030
- Warning: when isys-6030 is in acquisition mode, can consumes, included ESP32, between 230 and 360mA at 5V. Using a good USB cable is therefore recommended.
- #include <Arduino.h>
- Create a new project in your platformIO or Arduino IDE as usual.
- Copy this code, compile and upload to ESP32.
- 0.1
- Initial Release
This project is licensed under the MIT License - see the LICENSE.md file for details