Fix lots of occurrences of 'the the', 'the there', 'the these', 'the …

…then', 'the they.

ChangeLog.txt

@@ -176,7 +176,7 @@
 	* examples/Telnetd:  Add a test for the new Telnet daemon.
 	* examples/Telnetd/telnetd_driver.c: Move the internal socket structure from
 	  the daemon's socket array into the driver's state data so that it will be
-	  independent from the the Telnetd daemon.
+	  independent from the Telnetd daemon.
 	* apps/system/readline:  Moved the old nuttx/lib/stdio/lib_fgets.c here
 	  and renamed it as readline().  The old fgets was simplied and the overloaded
 	  readline functionality was removed.

examples/README.txt

@@ -132,7 +132,7 @@ examples/bridge
   networks was performed externally prior to the time that this test was
   started.  Otherwise, the following options are available:
 
-    CONFIG_EXAMPLES_BRIDGE_NETn_NOMAC - Select of the the network n hardware
+    CONFIG_EXAMPLES_BRIDGE_NETn_NOMAC - Select of the network n hardware
       does not have a built-in MAC address.  If selected, the MAC address
       provided by CONFIG_EXAMPLES_BRIDGE_NETn_MACADDR will be used to assign
       the MAC address to the network n device.
@@ -380,7 +380,7 @@ examples/elf
      size of the ELF binaries are using the 'objcopy --strip-unneeded' command to
      remove un-necessary information from the ELF files.
 
-  5. Simulator.  You cannot use this example with the the NuttX simulator on
+  5. Simulator.  You cannot use this example with the NuttX simulator on
      Cygwin.  That is because the Cygwin GCC does not generate ELF file but
      rather some Windows-native binary format.
 
@@ -676,7 +676,7 @@ examples/i2cchar
     CONFIG_EXAMPLES_I2SCHAR_BUFSIZE - The size of the data payload in one
       audio buffer.  Applies to both TX and RX audio buffers.
     CONFIG_EXAMPLES_I2SCHAR_DEVINIT - Define if architecture-specific I2S
-      device initialize is available.  If defined, the the platform specific
+      device initialize is available.  If defined, the platform specific
       code must provide a function i2schar_devinit() that will be called
       each time that this test executes.  Not available in the kernel build
       mode.
@@ -818,7 +818,7 @@ examples/module
      size of the ELF binaries are using the 'objcopy --strip-unneeded' command to
      remove un-necessary information from the ELF files.
 
-  5. Simulator.  You cannot use this example with the the NuttX simulator on
+  5. Simulator.  You cannot use this example with the NuttX simulator on
      Cygwin.  That is because the Cygwin GCC does not generate ELF file but
      rather some Windows-native binary format.
 
@@ -1603,7 +1603,7 @@ examples/posix_spawn
      size of the ELF binaries are using the 'objcopy --strip-unneeded' command to
      remove un-necessary information from the ELF files.
 
-  5. Simulator.  You cannot use this example with the the NuttX simulator on
+  5. Simulator.  You cannot use this example with the NuttX simulator on
      Cygwin.  That is because the Cygwin GCC does not generate ELF file but
      rather some Windows-native binary format.
 
@@ -1900,7 +1900,7 @@ examples/sotest
      size of the ELF binaries are using the 'objcopy --strip-unneeded' command to
      remove un-necessary information from the ELF files.
 
-  5. Simulator.  You cannot use this example with the the NuttX simulator on
+  5. Simulator.  You cannot use this example with the NuttX simulator on
      Cygwin.  That is because the Cygwin GCC does not generate ELF file but
      rather some Windows-native binary format.
 

examples/hidkbd/hidkbd_main.c

@@ -147,7 +147,7 @@ static void hidkbd_decode(FAR char *buffer, ssize_t nbytes)
   kbdstream.nbytes      = nbytes;
 
   /* Loop until all of the bytes have been consumed.  We implicitly assume
-   * that the the escaped sequences do not cross buffer boundaries.  That
+   * that the escaped sequences do not cross buffer boundaries.  That
    * might be true if the read buffer were small or the data rates high.
    */
 

examples/i2schar/Kconfig

@@ -81,7 +81,7 @@ config EXAMPLES_I2SCHAR_DEVINIT
 	depends on !BUILD_PROTECTED && !BUILD_KERNEL
 	---help---
 		Define if architecture-specific I2S device initialize is available.
-		If defined, the the platform specific code must provide a function
+		If defined, the platform specific code must provide a function
 		i2schar_devinit() that will be called each time that this test
 		executes.  Not available in the kernel build mode.
 

examples/keypadtest/keypadtest_main.c

@@ -141,7 +141,7 @@ static void keypad_decode(FAR char *buffer, ssize_t nbytes)
   kbdstream.nbytes      = nbytes;
 
   /* Loop until all of the bytes have been consumed.  We implicitly assume
-   * that the the escaped sequences do not cross buffer boundaries.  That
+   * that the escaped sequences do not cross buffer boundaries.  That
    * might be true if the read buffer were small or the data rates high.
    */
 

examples/media/Kconfig

@@ -34,7 +34,7 @@ config EXAMPLES_MEDIA_DEVPATH
 	string "Character driver path"
 	default "/dev/mtd0"
 	---help---
-		This is the full path to the the character driver that is used to
+		This is the full path to the character driver that is used to
 		access the media.  This test is suitable for use EEPROM character
 		drivers (see nuttx/drivers/eeprom), or with block drivers wrapped as
 		character drivers (see nuttx/drivers/bch)

examples/nsh/nsh_main.c

@@ -160,7 +160,7 @@ int nsh_main(int argc, char *argv[])
   ret = nsh_telnetstart();
   if (ret < 0)
     {
-     /* The daemon is NOT running.  Report the the error then fail...
+     /* The daemon is NOT running.  Report the error then fail...
       * either with the serial console up or just exiting.
       */
 

examples/nxhello/nxhello_bkgd.c

@@ -366,7 +366,7 @@ void nxhello_hello(NXWINDOW hwnd)
    * you would need to handle that event.
    */
 
-  /* Get a position so the the "Hello, World!" string will be centered on the
+  /* Get a position so the "Hello, World!" string will be centered on the
    * display.
    */
 

examples/nxterm/nxterm_main.c

@@ -237,7 +237,7 @@ int nxterm_main(int argc, char **argv)
   ret = nsh_telnetstart();
   if (ret < 0)
     {
-     /* The daemon is NOT running.  Report the the error then fail...
+     /* The daemon is NOT running.  Report the error then fail...
       * either with the serial console up or just exiting.
       */
 
@@ -361,7 +361,7 @@ int nxterm_main(int argc, char **argv)
 
   /* Start Console Task *****************************************************/
   /* Now re-direct stdout and stderr so that they use the NX console driver.
-   * Note that stdin is retained (file descriptor 0, probably the the serial console).
+   * Note that stdin is retained (file descriptor 0, probably the serial console).
     */
 
    printf("nxterm_main: Starting the console task\n");

examples/ostest/mqueue.c

@@ -391,7 +391,7 @@ void mqueue_test(void)
              (int)((intptr_t)result));
     }
 
-  /* Message queues are global resources and persist for the life the the
+  /* Message queues are global resources and persist for the life the
    * task group.  The message queue opened by the sender_thread must be closed
    * since the sender pthread may have been canceled and may have left the
    * message queue open.

examples/ostest/sporadic.c

@@ -216,7 +216,7 @@ void sporadic_test(void)
 #if CONFIG_SCHED_SPORADIC_MAXREPL < 5
   printf("sporadic_test: CONFIG_SCHED_SPORADIC_MAXREPL is small: %d\n",
          CONFIG_SCHED_SPORADIC_MAXREPL);
-  printf("  -- There will some errors in the the replenishment interval\n");
+  printf("  -- There will some errors in the replenishment interval\n");
 #endif
 
   printf("sporadic_test: Initializing semaphore to 0\n");

fsutils/inifile/inifile.c

@@ -435,7 +435,7 @@ static FAR char *
 
       iniinfo("varinfo.variable=\"%s\"\n", varinfo.variable);
 
-      /* Does the the variable name match the one we are looking for? */
+      /* Does the variable name match the one we are looking for? */
 
       if (strcasecmp(varinfo.variable, variable) == 0)
         {

graphics/traveler/src/trv_rayavoid.c

@@ -187,7 +187,7 @@ trv_coord_t trv_rayclip_player_xmotion(FAR struct trv_camera_s *pov,
 
                       /* The tangent is equal to the rate of change of Y with
                        * respect to the X-axis.  The tangent is stored at
-                       * double the the "normal" scaling -- so deltay is
+                       * double the "normal" scaling -- so deltay is
                        * "triple" precision
                        */
 
@@ -281,7 +281,7 @@ trv_coord_t trv_rayclip_player_xmotion(FAR struct trv_camera_s *pov,
 
                       /* The negative tangent is equal to the rate of change
                        * of Y with respect to the X-axis.The tangent is
-                       * stored at double the the "normal" scaling -- so
+                       * stored at double the "normal" scaling -- so
                        * deltay is "triple" precision
                        */
 
@@ -436,7 +436,7 @@ trv_coord_t trv_rayclip_player_ymotion(FAR struct trv_camera_s *pov,
 
                       /* The inverted tangent is equal to the rate of change
                        * of X with respect to the Y-axis.  The cotangent is
-                       * stored at double the the "normal" scaling -- so
+                       * stored at double the "normal" scaling -- so
                        * deltax is "triple" precision
                        */
 
@@ -530,7 +530,7 @@ trv_coord_t trv_rayclip_player_ymotion(FAR struct trv_camera_s *pov,
 
                       /* The negative inverted tangent is equal to the rate
                        * of change of X with respect to the Y-axis.  The
-                       * cotangent is stored at double the the "normal"
+                       * cotangent is stored at double the "normal"
                        * scaling -- so deltax is "triple" precision
                        */
 
@@ -584,8 +584,8 @@ trv_coord_t trv_ray_adjust_zpos(FAR struct trv_camera_s *pov,
   struct trv_rect_data_s *rect; /* Points to the rectangle data */
 
   /* We will place the player's feet at the largest Z plane
-   * which is lower the the player's eye level.  We traverse
-   * the the g_zplane list in order of increase Z values
+   * which is lower the player's eye level.  We traverse
+   * the g_zplane list in order of increase Z values
    */
 
   for (list = g_zplane.head; list; list = list->flink)
@@ -607,7 +607,7 @@ trv_coord_t trv_ray_adjust_zpos(FAR struct trv_camera_s *pov,
       if (pov->x >= rect->hstart &&  pov->x <= rect->hend &&
           pov->y >= rect->vstart &&  pov->y <= rect->vend)
         {
-          /* We have the the smallest Z plane under the player
+          /* We have the smallest Z plane under the player
            * which is below the player's eye level (pov->z).
            * Determine the approach delta Z value to return
            */

graphics/traveler/src/trv_raycast.c

@@ -584,7 +584,7 @@ static void trv_ray_ycaster12(FAR struct trv_raycast_s *result)
 
   /* Pre-calculate the rate of change of X and Z with respect to Y */
   /* The inverted tangent is equal to the rate of change of X with respect to
-   * the Y-axis.  The cotangent is stored at double the the "normal" scaling.
+   * the Y-axis.  The cotangent is stored at double the "normal" scaling.
    */
 
   dxdy = g_cot_table(g_camera.yaw);
@@ -646,7 +646,7 @@ static void trv_ray_ycaster12(FAR struct trv_raycast_s *result)
 
           if (absx >= rect->hstart && absx <= rect->hend)
             {
-              /* The X position lies in the rectangle.  Now, calculate the the
+              /* The X position lies in the rectangle.  Now, calculate the
                * Z position at this relative X position.  We can skip this step
                * if we are processing another rectangle at the same relx
                * distance.
@@ -810,7 +810,7 @@ static void trv_ray_ycaster34(FAR struct trv_raycast_s *result)
 
   /* Pre-calculate the rate of change of X and Z with respect to Y */
   /* The negative inverted tangent is equal to the rate of change of X with
-   * respect to the Y-axis.  The cotangent is stored at double the the
+   * respect to the Y-axis.  The cotangent is stored at double the
    * "normal" scaling.
    */
 
@@ -1103,7 +1103,7 @@ static void trv_ray_zcasteru(FAR struct trv_raycast_s *result)
 
           if (absx >= rect->hstart && absx <= rect->hend)
             {
-              /* The X position lies in the rectangle.  Now, calculate the the
+              /* The X position lies in the rectangle.  Now, calculate the
                * Y position at this relative Z position.  We can skip this step
                * if we are processing another rectangle at the same relx
                * distance.
@@ -1253,7 +1253,7 @@ static void trv_ray_zcasterl(FAR struct trv_raycast_s *result)
 
           if (absx >= rect->hstart && absx <= rect->hend)
             {
-              /* The X position lies in the rectangle.  Now, calculate the the
+              /* The X position lies in the rectangle.  Now, calculate the
                * Y position at this relative Z position.  We can skip this step
                * if we are processing another rectangle at the same relx
                * distance.

graphics/traveler/src/trv_rayprune.c

@@ -547,7 +547,7 @@ static void trv_ray_yawyprune_12cw(FAR struct trv_rect_head_s *outlist,
 
   /* Pre-calculate the rate of change of X with respect to Y */
   /* The inverted tangent is equal to the rate of change of X with respect
-   * to the Y-axis.  The cotangent is stored at double the the "normal"
+   * to the Y-axis.  The cotangent is stored at double the "normal"
    * scaling.
    */
 
@@ -638,7 +638,7 @@ static void trv_ray_yawyprune_12ccw(FAR struct trv_rect_head_s *outlist,
 
   /* Pre-calculate the rate of change of X with respect to Y */
   /* The inverted tangent is equal to the rate of change of X with respect
-   * to the Y-axis.  The cotangent is stored at double the the "normal"
+   * to the Y-axis.  The cotangent is stored at double the "normal"
    * scaling.
    */
 
@@ -729,7 +729,7 @@ static void trv_ray_yawyprune_34cw(FAR struct trv_rect_head_s *outlist,
 
   /* Pre-calculate the rate of change of X with respect to Y */
   /* The negative inverted tangent is equal to the rate of change of X with
-   * respect to the Y-axis.  The cotangent is stored at double the the
+   * respect to the Y-axis.  The cotangent is stored at double the
    * "normal" scaling.
    */
 
@@ -820,7 +820,7 @@ static void trv_ray_yawyprune_34ccw(FAR struct trv_rect_head_s *outlist,
 
   /* Pre-calculate the rate of change of X with respect to Y */
   /* The negative inverted tangent is equal to the rate of change of X with
-   * respect to the Y-axis.  The cotangent is stored at double the the
+   * respect to the Y-axis.  The cotangent is stored at double the
    * "normal" scaling.
    */
 

graphics/traveler/src/trv_world.c

@@ -238,7 +238,7 @@ static uint8_t trv_ini_long(INIHANDLE inihandle, FAR long *value,
  * Name: trv_ini_filename
  *
  * Description:
- *   Reads a file name from the the INI file.
+ *   Reads a file name from the INI file.
  *
  ****************************************************************************/
 

graphics/traveler/tools/libwld/wld_createworld.c

@@ -353,7 +353,7 @@ static uint8_t wld_read_longint(INIHANDLE handle, long *variable_value,
 
 /*************************************************************************
  * Name: wld_read_filename
- * Description: Reads a file name from the the INI file.
+ * Description: Reads a file name from the INI file.
  ************************************************************************/
 
 static uint8_t wld_read_filename(INIHANDLE handle,

graphics/traveler/tools/libwld/wld_inifile.c

@@ -387,7 +387,7 @@ static char *inifile_find_section_variable(struct inifile_state_s *priv,
           return NULL;
         }
 
-      /* Does the the variable name match the one we are looking for? */
+      /* Does the variable name match the one we are looking for? */
 
       if (strcasecmp(varinfo.variable, variable) == 0)
         {

graphics/traveler/tools/tcledit/tcl_paint.c

@@ -212,7 +212,7 @@ static void tcl_paint_coplanar_rectangle(tcl_window_t *w,
       vtop = g_view_size - vtmp - 1;
     }
 
-  /* We now have some rectangle that we know is to fully on the the display.
+  /* We now have some rectangle that we know is to fully on the display.
    * Get the display positions of the rectangle
    */
 
@@ -255,7 +255,7 @@ static int tcl_check_horizontal_rectangle(tcl_window_t *w, rect_data_t *ptr, int
       posend = ptr->hend;
     }
 
-  /* Verify the the vertical rectangle intersects the viewing plane */
+  /* Verify the vertical rectangle intersects the viewing plane */
 
   return ((posstart <= pos) && (posend >= pos));
 }
@@ -345,7 +345,7 @@ static void tcl_paint_horizontal_rectangle(tcl_window_t *w, rect_data_t *ptr,
       hright = g_view_size - 1;
     }
 
-  /* We now have some line segment that we know is to fully on the the display. 
+  /* We now have some line segment that we know is to fully on the display. 
    * Get the display positions of the line segment.
    */
 
@@ -403,7 +403,7 @@ static int tcl_check_vertical_rectangle(tcl_window_t *w, rect_data_t *ptr, int p
       posend = ptr->vend;
     }
 
-  /* Verify the the vertical rectangle intersects the viewing plane */
+  /* Verify the vertical rectangle intersects the viewing plane */
 
   return ((posstart <= pos) && (posend >= pos));
 }
@@ -497,7 +497,7 @@ static void tcl_paint_vertical_rectangle(tcl_window_t *w, rect_data_t *ptr,
       vtop = g_view_size - vtmp - 1;
     }
 
-  /* We now have some line segment that we know is to fully on the the display. 
+  /* We now have some line segment that we know is to fully on the display. 
    * Get the display positions of the line segment
    */
 

include/interpreters/minibasic.h

@@ -4,7 +4,7 @@
  *   Copyright (C) 2016 Gregory Nutt. All rights reserved.
  *
  * This file was taken from Mini Basic, versino 1.0 developed by Malcolm
- * McLean, Leeds University.  Mini Basic version 1.0 was released the the
+ * McLean, Leeds University.  Mini Basic version 1.0 was released the
  * Creative Commons Attribution license which, from my reading, appears to
  * be compatible with the NuttX BSD-style license:
  *

include/system/zmodem.h

@@ -101,7 +101,7 @@
 #  define CONFIG_SYSTEM_ZMODEM_MOUNTPOINT "/tmp"
 #endif
 
-/* CONFIG_SYSTEM_ZMODEM_RCVSAMPLE indicates the the local sender can sample
+/* CONFIG_SYSTEM_ZMODEM_RCVSAMPLE indicates the local sender can sample
  * reverse channel while sending.  This means in particular, that Zmodem can
  * detect if data is received from the remote receiver while streaming a file
  * to the remote receiver. Support for such asychronous incoming data

interpreters/README.txt

@@ -89,7 +89,7 @@ micropython
   4. Micro Python needs the math library libm.a.  The math library built into
      NuttX is sufficient and that can be included with CONFIG_LIBM=y.  If you
      prefer a more highly tuned math library then refer to the discussion of
-     math.h in the the top-level nuttx/README.txt file.  Also refer to the
+     math.h in the top-level nuttx/README.txt file.  Also refer to the
      discussions in the NuttX Yahoo! forum; people have found many creative
      way to link with the newlib math library, for example.