PiRowFlo for Waterrower

Installation

On a fresh installed Raspbian, git must be installed first

sudo apt-get install git

Clone the repo from Github:

git clone https://github.com/TbsJah/pirowflo.git

go into the folder:

cd pirowflo 

make install.sh executable:

sudo chmod +x install.sh

execute install.sh in order to setup everything: (This can take 5 - 10 min to set all up). If during the first installation you hadn't have your Ant+ dongle. Just re-run the script and it will install the missing Ant+ and udev profiles.

sudo ./install.sh 

Once installation and reboot complete, go into the pirowflo/src folder

cd /home/pi/pirowflo/src

Pull the repo from Github:

git pull https://github.com/TbsJah/pirowflo.git

Getting Started

Start PiRowFlo from the webserver which is available under the:

http://"raspberry-pi-IP":9001

start PiRowFlo from console

python3 waterrowerthreads.py -i sr -a

optional arguments:
  -h, --help            show this help message and exit
  -i {s4,sr}, --interface {s4,sr}
                        choose  Waterrower interface S4 monitor: s4 or Smartrow: sr
  -b, --blue            Broadcast Waterrower data over bluetooth low energy
  -a, --antfe           Broadcast Waterrower data over Ant+