A simple Linux-based doorbell, which plays the mp3 ringtone upon receiving a special MQTT message.
The main idea is to create a system service, which can play an audio file upon receiving the message from the MQTT message broker. This may be useful for configuring sound notifications or alarms in the Home Assistant automations.
This module also supports random ringtones based on a pattern. This means the same message may result in random ringtones being played based on the pattern received in the MQTT message.
This solution has been tested on Ubuntu 22.04, but most likely will work on other Linux distros, with minor changes.
-
Mosquitto MQTT message broker installed and accessible from the deployment machine. You will need to create credentials (user/password) on the MQTT broker server for this solution.
-
MP3 player utility, which can play mp3 files from the command line, installed on the host machine. I used mpg123 but other options should work as well.
-
Python verison >= 3.10 + pip.
First please ensure all pre-requisites are in place. Testing your MP3 player from the command line on the host where you plan to deploy this tool is the first step - you need to ensure that mp3 files are played as expected.
Please note that the following commands will require administrative grants, so please don't forget to start them with sudo if required.
For example, here is the command for the mpg123 utility:
$ mpg123 -qf32768 -adefault:CARD=Speaker /path/to/ringtone.mp3
In this command, the number after the -qf option represents the volume, which can range from -32767 to 32768.
Second, we need to create a user profile, which will run the mqtt-doorbell service:
$ useradd -M doorbell
$ usermod -L doorbell
$ groupadd doorbell
$ usermod -a -G doorbell,audio doorbell
Install the solution with the following command (must be under sudo!):
$ sudo pip install mqtt-doorbell
Next step is to configure the mqtt-doorbell service
First we need to create the configuration file doorbell.conf in the /etc/mqtt-doorbell folder. The file should be as follows:
[broker]
server = localhost
port = 1883
user = mqtt_user
password = mqtt_password
topic = doorbell/ring
[bell]
default_ring = classic-doorbell
mp3player_cmd = mpg123 -qf32768 -adefault:CARD=Speaker
Please ensure to update the MQTT broker username and password accordingly.
Then, we need to create the mqtt-doorbell.service service configuration file in the /lib/systemd/system folder, as follows:
[Unit]
Description=MQTT Doorbell Service
[Service]
WorkingDirectory=/etc/mqtt-doorbell/
ExecStart=/usr/bin/python3 -m mqtt-doorbell.valet
Type=simple
User=doorbell
Group=doorbell
Restart=always
[Install]
WantedBy=multi-user.target
Next, we need to create a media folder /etc/mqtt-doorbell/media and place there all the mp3 files we want to use as ringtones. You may download the ringtones from here or use your own mp3 files.
Finally we can enable and start the service:
$ systemctl enable mqtt-doorbell.service
$ systemctl start mqtt-doorbell.service
In order to trigger the ringtone you will need to send the following MQTT message to the doorbell/ring topic:
{"ringtone": "filename_pattern"}where the filename_pattern should match the name of an MP3 file or files in the media folder. A random ringtone from the search result will be played in case of multiple match.