Skip to content

Verilog project that takes the digital video and audio from a Neo Geo MVS before going through the DACs and outputs the signals over HDMI

License

Unknown, GPL-2.0 licenses found

Licenses found

Unknown
LICENSE.md
GPL-2.0
COPYING
Notifications You must be signed in to change notification settings

charcole/NeoGeoHDMI

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

52 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

HDMI output for NeoGeo MVS

Summary: The digital video and audio outputs from the Neo Geo MVS are tapped off before going through the DACs. Instead an FPGA reads the data and outputs the signal over HDMI forming a direct digital to digital connection.

This video should explain things:

IMAGE ALT TEXT HERE

The FPGA generates the HDMI video signal with data islands to embed the audio. It also controls the clock of the Neo Geo MVS so it can produce the exact 720x480p at 60fps timing that the HDMI specification demands. See the notes for more details.

If you've built hardware based on older releases of the wiring information then note that in the new build I've changed pin 73 to pin 104 for the lowest bit of the blue channel. This is because pin 73 was connected to the power rail on the dev board.

This project might also be notable in that it's one of the very few (that I know of) that features working audio over HDMI.

Nb. The code was originally based off the HDMI/DVI sample code from fpga4fun.com.

About

Verilog project that takes the digital video and audio from a Neo Geo MVS before going through the DACs and outputs the signals over HDMI

Resources

License

Unknown, GPL-2.0 licenses found

Licenses found

Unknown
LICENSE.md
GPL-2.0
COPYING

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published