Skip to content

Hellogopher: "just clone and make" your conventional Go project

License

Notifications You must be signed in to change notification settings

cloudflare/hellogopher

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

46 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Hellogopher: "just clone and make"

Hellogopher is a Makefile that makes your conventional Go project build from anywhere, for anyone, with just make.

Quickstart

wget https://raw.githubusercontent.com/cloudflare/hellogopher/master/Makefile
$EDITOR Makefile # modify IMPORT_PATH
make setup
git add Makefile .gitignore vendor/

You can now just clone the repository anywhere, and make it. go get still works as usual.

$ make
$ ./bin/hello
Hello, world!

$ make test
$ make cover

If you get cannot find package errors, you need to read the Vendoring section.

demo

What is IMPORT_PATH?

IMPORT_PATH is the absolute unique name of your repository. It's usually where it can be found, too. For example github.com/FiloSottile/example.

You use the IMPORT_PATH any time you want to refer to your code: in the Makefile, with import, with go get.

If your IMPORT_PATH is github.com/FiloSottile/example, the code in the root of your repository is github.com/FiloSottile/example (and it will compile to a binary named example), the code in the folder foo is github.com/FiloSottile/example/foo, cmd/bar is github.com/FiloSottile/example/cmd/bar, and so on.

If you change the IMPORT_PATH you have to run make clean.

If you don't care about go get, for example if the code is embedded inside some other non-Go codebase, you can just pick an arbitrary one like company.com/bigprogram/smallgotool.

Vendoring

A hellogopher project uses the official Go vendoring style: third-party packages go in ./vendor/, like ./vendor/github.com/fatih/color. The Makefile will intentionally ignore your system GOPATH to force you to vendor.

Hellogopher has no opinions on how you populate the vendor folder, but a tool that is guaranteed to work as flexibly as hellogopher is gvt. If you use make setup you'll find gvt in ./bin/gvt.

Don't forget to check the vendor folder into your VCS.

./bin/gvt fetch github.com/fatih/color
git add vendor/

Using editors and other tools

All the tools used by the Makefile have been vetted and fixed to work out of the box. However, most other tools (gometalinter, guru, ...) and editors are very likely not to work unless you place the repository at $GOPATH/src/$IMPORT_PATH.

The point of hellogopher is not to be an universal wrapper or the only tool you use, but to get you started easily before you learn GOPATH.

Why

Go developers should know and use GOPATH. But it shouldn't be the first thing they are exposed to. At Cloudflare we noticed it was the main cause of friction for novice or casual Go users. They expect to just clone a repository anywhere, and be able to build it.

Hellogopher allows non-Go developers to easily build the project in any environment, and provides enough tools (test, cover, format) for the casual contributor.

Still, a hellogopher project is just a standard go get-able project. Regular Go developers should place the repository at its proper place in the GOPATH, so they can use all other tools that expect a GOPATH. (And they can still benefit from the convenience methods like make cover and the vendoring enforcement.)

Hellogopher makes your install instructions look like this:

go get -u github.com/FiloSottile/zcash-mini
 - or -
git clone https://github.com/FiloSottile/zcash-mini
cd zcash-mini && make && sudo cp ./bin/zcash-mini /usr/local/bin/

It achieves similar results to gb, but preserving the conventional structure of a Go project. It works similarly to the Camlistore build system but without the temporary copies.

Features

A hellogopher-based project is a proper Go repository, so you can go get it and import it from other packages. But at the same time it includes a powerful Makefile that isolates the build from the system and works from anywhere, without having to setup a GOPATH.

make

A standard build target builds a binary and places it in bin/.

Version and build time are injected at link time.

All operations take full advantage of incremental builds.

The system GOPATH is ignored, so only vendored dependencies are used.

make test

make test runs go vet and go test -race on all packages, excluding those matching a pattern in IGNORED_PACKAGES.

GODEBUG=cgocheck=2 is set so that the (expensive) full suite of cgo checks are run during tests. It has no effect if you don't use cgo.

It installs the race libraries (in the hidden GOPATH) just so it does not have to compile them the next time.

make cover

make cover aggregates the coverage of all tests over all packages. That is, it runs the test suite of all packages, each time collecting the coverage over all packages, and then aggregates all those reports into one.

It prints detailed statistics and opens the full HTML report in the browser.

Note: make cover does not exit 1 on failure.

make format

make format runs goimports on all non-ignored packages.

Version and build information

make build uses VERSION_FLAGS which is generated from the build version (git tag and hash) and the time of the build.

For these to be accessible to your Go application you need to include the following in your main.go:

// Version and BuildTime are filled in during build by the Makefile
var (
	Version   = "N/A"
	BuildTime = "N/A"
)

An example of this can be seen in the subdirs example.

CI mode

CI mode is enabled if the environment variable CI is set to 1.

The make test full verbose output is both sent to stdout/stderr, and saved in .GOPATH/test/vet.txt and .GOPATH/test/output.txt.

The make cover HTML report is saved in .GOPATH/cover/all.html.

Cross-compiling

You can cross-compile easily with GOOS=linux make. The generated binary will end up in bin/OS_ARCH/, like bin/linux_amd64/hello.

Hellogopher works nicely also if you share a folder between architectures, for example with Docker for Mac.

Tips and FAQ

Don't use relative imports (the ones starting with ./). Just don't. No, really.

If you get cannot find package errors, read the Vendoring section.

Binary targets are .PHONY because hellogopher uses the Go native incremental build support.

Binaries will be named after the folder they are in. If your package main is in the repository root and not in a subfolder, the binary will be named after the repository name. This is a fundamental concept of Go.

If code is not in the project root, add the sub-path to $(IMPORT_PATH) in the build target. There's an example called otherbin in a new hellogopher. But a hellogopher project is just a normal Go project, so no need for src/ folders within repositories.

To exclude a package from make test/cover/list/format add its name (or a part of it) to IGNORED_PACKAGES. By default vendored packages are excluded. You might need to do this if you have 3rd party code outside of vendor/, too.

If you add Makefile binary targets don't forget the .GOPATH/.ok dependency.

If you need to go build a lone .go file instead of a package, first stop and think if it shouldn't be a package instead. Then if you insist build them like this:

go build $(GOPATH)/src/$(IMPORT_PATH)/my/go/file.go

To run the Makefile verbosely, printing commands and build progress, set V := 1 at the top of the Makefile. You can use make $TARGET V=1 and make $TARGET V= to control this on a per-call basis.

How does this work?

You don't need to read, understand or like this to use hellogopher.

The trick to the magic Makefile is that it creates a GOPATH in .GOPATH, and places a symlink back to the root of the repo at the position where your package is supposed to be.

For example, .GOPATH/src/github.com/FiloSottile/example -> ../../../...

It then uses .GOPATH as the GOPATH, and runs go install.

The GOPATH is permanent and local, and changes don't need to be synced since it uses a symlink to the repo. So incremental builds just work.

There are a lot of workarounds to make the symlink work, but they all revolve around the fact that ./... does not traverse the symlink. So instead we first cd into it, and run go list ./... from that perspective. Similarly, goimports needs to know that the files are relative to the GOPATH to recognize the vendor folder, so we pass prefixed paths to it.

This is a bit complex, but the idea is that if you use other tools, you'll place the package in the right place in your system GOPATH and not use the symlink trick. All the work to make the Makefile tools work with symlinks has already been done for you :)

License

MIT License

About

Hellogopher: "just clone and make" your conventional Go project

Resources

License

Code of conduct

Security policy

Stars

Watchers

Forks

Packages

No packages published