PixMob IR Codes for Flipper Zero

Control your PixMob wristbands at home with a Flipper Zero!

These IR codes were generated based on the reverse engineering work detailed here: https://github.com/danielweidman/pixmob-ir-reverse-engineering

flipper_pixmob_demo.mp4

Files

This repo contains three files of IR codes:

1. PixMob_main.ir: Codes to set bracelets to any common color, and fade in or out of each color
2. PixMob_all_colors.ir: Codes to set bracelets to every possible color (with what reverse-engineering has found so far), but without the fade effects
3. PixMob_special.ir: Special codes to do things like random colors, enter motion sensitive mode on very old PixMob bracelets, and more. It is easy to mess up bracelets using these codes because some have persistent effects. I don't recommend using this unless you are willing to mess up your bracelet and require a difficult reset.

I reccomend PixMob_main.ir as a starting place.

How to use

Copy one of the IR code files (start with PixMob_main.ir) into the infrared folder of your Flipper Zero SD card. You can do this either with qFlipper or by taking out the SD card, mounting it on your computer, moving the files, and putting the SD card back into the Flipper. From there, look under your "Saved Remotes" in the "Infrared" app for the relevant new remote and try sending some signals!