Mask tool. Add ability to output custom imported masks

locales/es/LC_MESSAGES/tools.mask.cli.po

@@ -6,8 +6,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: faceswap.spanish\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-03-28 23:51+0000\n"
-"PO-Revision-Date: 2024-03-29 00:01+0000\n"
+"POT-Creation-Date: 2024-06-28 13:45+0100\n"
+"PO-Revision-Date: 2024-06-28 13:47+0100\n"
 "Last-Translator: \n"
 "Language-Team: tokafondo\n"
 "Language: es_ES\n"
@@ -16,7 +16,7 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 "Generated-By: pygettext.py 1.5\n"
-"X-Generator: Poedit 3.4.2\n"
+"X-Generator: Poedit 3.4.4\n"
 
 #: tools/mask/cli.py:15
 msgid ""
@@ -181,7 +181,7 @@ msgstr ""
 "файл выравниваний. Примечание. «custom» должен быть выбранным «masker», а "
 "маски должны быть в том же формате, что и «input-type» (frames или faces)."
 
-#: tools/mask/cli.py:135 tools/mask/cli.py:154 tools/mask/cli.py:174
+#: tools/mask/cli.py:135 tools/mask/cli.py:154 tools/mask/cli.py:176
 msgid "import"
 msgstr "importar"
 
@@ -216,9 +216,11 @@ msgstr ""
 
 #: tools/mask/cli.py:156
 msgid ""
-"R|Import only. The centering to use when importing masks. Note: For any job "
-"other than 'import' this option is ignored as mask centering is handled "
-"internally.\n"
+"R|Import/Output only. When importing masks, this is the centering to use. "
+"For output this is only used for outputting custom imported masks, and "
+"should correspond to the centering used when importing the mask. Note: For "
+"any job other than 'import' and 'output' this option is ignored as mask "
+"centering is handled internally.\n"
 "L|face: Centers the mask on the center of the face, adjusting for pitch and "
 "yaw. Outside of requirements for full head masking/training, this is likely "
 "to be the best choice.\n"
@@ -230,9 +232,12 @@ msgid ""
 "the nose with and crops closely to the face. Can result in the edges of the "
 "mask appearing outside of the training area."
 msgstr ""
-"R|Sólo importar. El centrado a utilizar al importar máscaras. Nota: Para "
-"cualquier trabajo que no sea \"importar\", esta opción se ignora ya que el "
-"centrado de la máscara se maneja internamente.\n"
+"R|Solo importación/salida. Al importar máscaras, este es el centrado que se "
+"debe utilizar. Para la salida, esto solo se utiliza para generar máscaras "
+"importadas personalizadas y debe corresponder al centrado utilizado al "
+"importar la máscara. Nota: Para cualquier trabajo que no sea \"importación\" "
+"y \"salida\", esta opción se ignora ya que el centrado de la máscara se "
+"maneja internamente.\n"
 "L|cara: centra la máscara en el centro de la cara, ajustando el tono y la "
 "orientación. Aparte de los requisitos para el entrenamiento/enmascaramiento "
 "de cabeza completa, esta probablemente sea la mejor opción.\n"
@@ -244,7 +249,7 @@ msgstr ""
 "nariz y la recorta cerca de la cara. Puede provocar que los bordes de la "
 "máscara aparezcan fuera del área de entrenamiento."
 
-#: tools/mask/cli.py:179
+#: tools/mask/cli.py:181
 msgid ""
 "Import only. The size, in pixels to internally store the mask at.\n"
 "The default is 128 which is fine for nearly all usecases. Larger sizes will "
@@ -256,20 +261,20 @@ msgstr ""
 "uso. Los tamaños más grandes darán como resultado archivos de alineaciones "
 "más grandes y un procesamiento más largo."
 
-#: tools/mask/cli.py:187 tools/mask/cli.py:195 tools/mask/cli.py:209
-#: tools/mask/cli.py:223 tools/mask/cli.py:233
+#: tools/mask/cli.py:189 tools/mask/cli.py:197 tools/mask/cli.py:211
+#: tools/mask/cli.py:225 tools/mask/cli.py:235
 msgid "output"
 msgstr "salida"
 
-#: tools/mask/cli.py:189
+#: tools/mask/cli.py:191
 msgid ""
 "Optional output location. If provided, a preview of the masks created will "
 "be output in the given folder."
 msgstr ""
 "Ubicación de salida opcional. Si se proporciona, se obtendrá una vista "
 "previa de las máscaras creadas en la carpeta indicada."
 
-#: tools/mask/cli.py:200
+#: tools/mask/cli.py:202
 msgid ""
 "Apply gaussian blur to the mask output. Has the effect of smoothing the "
 "edges of the mask giving less of a hard edge. the size is in pixels. This "
@@ -282,7 +287,7 @@ msgstr ""
 "redondeará al siguiente número impar. NB: Sólo afecta a la vista previa de "
 "salida. Si se ajusta a 0, se desactiva"
 
-#: tools/mask/cli.py:214
+#: tools/mask/cli.py:216
 msgid ""
 "Helps reduce 'blotchiness' on some masks by making light shades white and "
 "dark shades black. Higher values will impact more of the mask. NB: Only "
@@ -293,7 +298,7 @@ msgstr ""
 "más a la máscara. NB: Sólo afecta a la vista previa de salida. Si se ajusta "
 "a 0, se desactiva"
 
-#: tools/mask/cli.py:225
+#: tools/mask/cli.py:227
 msgid ""
 "R|How to format the output when processing is set to 'output'.\n"
 "L|combined: The image contains the face/frame, face mask and masked face.\n"
@@ -308,7 +313,7 @@ msgstr ""
 "enmascarada.\n"
 "L|mask: Sólo emite la máscara como una imagen de un solo canal."
 
-#: tools/mask/cli.py:235
+#: tools/mask/cli.py:237
 msgid ""
 "R|Whether to output the whole frame or only the face box when using output "
 "processing. Only has an effect when using frames as input."

locales/kr/LC_MESSAGES/tools.mask.cli.po

@@ -7,16 +7,16 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-03-28 23:51+0000\n"
-"PO-Revision-Date: 2024-03-29 00:05+0000\n"
+"POT-Creation-Date: 2024-06-28 13:45+0100\n"
+"PO-Revision-Date: 2024-06-28 13:48+0100\n"
 "Last-Translator: \n"
 "Language-Team: \n"
 "Language: ko_KR\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Poedit 3.4.2\n"
+"X-Generator: Poedit 3.4.4\n"
 
 #: tools/mask/cli.py:15
 msgid ""
@@ -165,7 +165,7 @@ msgstr ""
 "'custom'은 선택된 'masker'여야 하며 마스크는 'input-type'(frames 또는 faces)"
 "과 동일한 형식이어야 합니다."
 
-#: tools/mask/cli.py:135 tools/mask/cli.py:154 tools/mask/cli.py:174
+#: tools/mask/cli.py:135 tools/mask/cli.py:154 tools/mask/cli.py:176
 msgid "import"
 msgstr "수입"
 
@@ -196,9 +196,11 @@ msgstr ""
 
 #: tools/mask/cli.py:156
 msgid ""
-"R|Import only. The centering to use when importing masks. Note: For any job "
-"other than 'import' this option is ignored as mask centering is handled "
-"internally.\n"
+"R|Import/Output only. When importing masks, this is the centering to use. "
+"For output this is only used for outputting custom imported masks, and "
+"should correspond to the centering used when importing the mask. Note: For "
+"any job other than 'import' and 'output' this option is ignored as mask "
+"centering is handled internally.\n"
 "L|face: Centers the mask on the center of the face, adjusting for pitch and "
 "yaw. Outside of requirements for full head masking/training, this is likely "
 "to be the best choice.\n"
@@ -210,9 +212,11 @@ msgid ""
 "the nose with and crops closely to the face. Can result in the edges of the "
 "mask appearing outside of the training area."
 msgstr ""
-"R|가져오기만. 마스크를 가져올 때 사용할 센터링입니다. 참고: '가져오기' 이외"
-"의 모든 작업의 경우 마스크 센터링이 내부적으로 처리되므로 이 옵션은 무시됩니"
-"다.\n"
+"R|Import/Output only. 마스크를 가져올 때, 이것은 사용할 중앙 정렬입니다. 출력"
+"의 경우, 이것은 사용자 지정 가져온 마스크를 출력하는 데만 사용되며, 마스크를 "
+"가져올 때 사용된 중앙 정렬과 일치해야 합니다. 참고: 'import' 및 'output' 이외"
+"의 모든 작업의 ​​경우 마스크 중앙 정렬이 내부적으로 처리되므로 이 옵션은 무시됩"
+"니다.\n"
 "L|면: 피치와 요를 조정하여 마스크를 얼굴 중앙에 배치합니다. 머리 전체 마스킹/"
 "훈련에 대한 요구 사항을 제외하면 이것이 최선의 선택일 가능성이 높습니다.\n"
 "L|head: 마스크를 머리 중앙에 배치하여 피치와 요를 조정합니다. 참고: 마스크 내"
@@ -221,7 +225,7 @@ msgstr ""
 "L|레거시: '원래' 추출 기술입니다. 마스크를 코 근처 중앙에 배치하고 얼굴에 가"
 "깝게 자릅니다. 마스크 가장자리가 훈련 영역 외부에 나타날 수 있습니다."
 
-#: tools/mask/cli.py:179
+#: tools/mask/cli.py:181
 msgid ""
 "Import only. The size, in pixels to internally store the mask at.\n"
 "The default is 128 which is fine for nearly all usecases. Larger sizes will "
@@ -231,20 +235,20 @@ msgstr ""
 "기본값은 128이며 거의 모든 사용 사례에 적합합니다. 크기가 클수록 정렬 파일도 "
 "커지고 처리 시간도 길어집니다."
 
-#: tools/mask/cli.py:187 tools/mask/cli.py:195 tools/mask/cli.py:209
-#: tools/mask/cli.py:223 tools/mask/cli.py:233
+#: tools/mask/cli.py:189 tools/mask/cli.py:197 tools/mask/cli.py:211
+#: tools/mask/cli.py:225 tools/mask/cli.py:235
 msgid "output"
 msgstr "출력"
 
-#: tools/mask/cli.py:189
+#: tools/mask/cli.py:191
 msgid ""
 "Optional output location. If provided, a preview of the masks created will "
 "be output in the given folder."
 msgstr ""
 "선택적 출력 위치. 만약 값이 제공된다면 생성된 마스크 미리 보기가 주어진 폴더"
 "에 출력됩니다."
 
-#: tools/mask/cli.py:200
+#: tools/mask/cli.py:202
 msgid ""
 "Apply gaussian blur to the mask output. Has the effect of smoothing the "
 "edges of the mask giving less of a hard edge. the size is in pixels. This "
@@ -256,7 +260,7 @@ msgstr ""
 "은 홀수여야 하며 짝수가 전달되면 다음 홀수로 반올림됩니다. NB: 출력 미리 보기"
 "에만 영향을 줍니다. 0으로 설정하면 꺼집니다"
 
-#: tools/mask/cli.py:214
+#: tools/mask/cli.py:216
 msgid ""
 "Helps reduce 'blotchiness' on some masks by making light shades white and "
 "dark shades black. Higher values will impact more of the mask. NB: Only "
@@ -266,7 +270,7 @@ msgstr ""
 "줄이는 데 도움이 됩니다. 값이 클수록 마스크에 더 많은 영향을 미칩니다. NB: 출"
 "력 미리 보기에만 영향을 줍니다. 0으로 설정하면 꺼집니다"
 
-#: tools/mask/cli.py:225
+#: tools/mask/cli.py:227
 msgid ""
 "R|How to format the output when processing is set to 'output'.\n"
 "L|combined: The image contains the face/frame, face mask and masked face.\n"
@@ -279,7 +283,7 @@ msgstr ""
 "L|masked: 마스크된 얼굴/프레임을 Rgba 이미지로 출력합니다.\n"
 "L|mask: 마스크를 단일 채널 이미지로만 출력합니다."
 
-#: tools/mask/cli.py:235
+#: tools/mask/cli.py:237
 msgid ""
 "R|Whether to output the whole frame or only the face box when using output "
 "processing. Only has an effect when using frames as input."

locales/ru/LC_MESSAGES/tools.mask.cli.po

@@ -7,8 +7,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-03-28 23:51+0000\n"
-"PO-Revision-Date: 2024-03-29 00:07+0000\n"
+"POT-Creation-Date: 2024-06-28 13:45+0100\n"
+"PO-Revision-Date: 2024-06-28 13:48+0100\n"
 "Last-Translator: \n"
 "Language-Team: \n"
 "Language: ru\n"
@@ -17,7 +17,7 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && "
 "n%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n"
-"X-Generator: Poedit 3.4.2\n"
+"X-Generator: Poedit 3.4.4\n"
 
 #: tools/mask/cli.py:15
 msgid ""
@@ -175,7 +175,7 @@ msgstr ""
 "de alineaciones. Nota: 'custom' debe ser el 'masker' seleccionado y las "
 "máscaras deben tener el mismo formato que el 'input-type' (frames o faces)"
 
-#: tools/mask/cli.py:135 tools/mask/cli.py:154 tools/mask/cli.py:174
+#: tools/mask/cli.py:135 tools/mask/cli.py:154 tools/mask/cli.py:176
 msgid "import"
 msgstr "Импортировать"
 
@@ -208,9 +208,11 @@ msgstr ""
 
 #: tools/mask/cli.py:156
 msgid ""
-"R|Import only. The centering to use when importing masks. Note: For any job "
-"other than 'import' this option is ignored as mask centering is handled "
-"internally.\n"
+"R|Import/Output only. When importing masks, this is the centering to use. "
+"For output this is only used for outputting custom imported masks, and "
+"should correspond to the centering used when importing the mask. Note: For "
+"any job other than 'import' and 'output' this option is ignored as mask "
+"centering is handled internally.\n"
 "L|face: Centers the mask on the center of the face, adjusting for pitch and "
 "yaw. Outside of requirements for full head masking/training, this is likely "
 "to be the best choice.\n"
@@ -222,9 +224,12 @@ msgid ""
 "the nose with and crops closely to the face. Can result in the edges of the "
 "mask appearing outside of the training area."
 msgstr ""
-"R|Только импорт. Центрирование, используемое при импорте масок. Примечание. "
-"Для любого задания, кроме «импорта», этот параметр игнорируется, поскольку "
-"центрирование маски обрабатывается внутри.\n"
+"R|Только импорт/вывод. При импорте масок это центрирование для "
+"использования. Для вывода это используется только для вывода "
+"пользовательских импортированных масок и должно соответствовать "
+"центрированию, используемому при импорте маски. Примечание: для любого "
+"задания, кроме «импорта» и «вывода», эта опция игнорируется, поскольку "
+"центрирование маски обрабатывается внутренне.\n"
 "L|face: центрирует маску по центру лица с регулировкой угла наклона и "
 "отклонения от курса. Помимо требований к полной маскировке/тренировке "
 "головы, это, вероятно, будет лучшим выбором.\n"
@@ -236,7 +241,7 @@ msgstr ""
 "приближает ее к лицу. Это может привести к тому, что края маски окажутся за "
 "пределами тренировочной зоны."
 
-#: tools/mask/cli.py:179
+#: tools/mask/cli.py:181
 msgid ""
 "Import only. The size, in pixels to internally store the mask at.\n"
 "The default is 128 which is fine for nearly all usecases. Larger sizes will "
@@ -247,20 +252,20 @@ msgstr ""
 "использования. Большие размеры приведут к увеличению размера файлов "
 "выравниваний и более длительной обработке."
 
-#: tools/mask/cli.py:187 tools/mask/cli.py:195 tools/mask/cli.py:209
-#: tools/mask/cli.py:223 tools/mask/cli.py:233
+#: tools/mask/cli.py:189 tools/mask/cli.py:197 tools/mask/cli.py:211
+#: tools/mask/cli.py:225 tools/mask/cli.py:235
 msgid "output"
 msgstr "вывод"
 
-#: tools/mask/cli.py:189
+#: tools/mask/cli.py:191
 msgid ""
 "Optional output location. If provided, a preview of the masks created will "
 "be output in the given folder."
 msgstr ""
 "Необязательное местоположение вывода. Если указано, предварительный просмотр "
 "созданных масок будет выведен в указанную папку."
 
-#: tools/mask/cli.py:200
+#: tools/mask/cli.py:202
 msgid ""
 "Apply gaussian blur to the mask output. Has the effect of smoothing the "
 "edges of the mask giving less of a hard edge. the size is in pixels. This "
@@ -273,7 +278,7 @@ msgstr ""
 "Примечание: влияет только на предварительный просмотр. Установите значение 0 "
 "для выключения"
 
-#: tools/mask/cli.py:214
+#: tools/mask/cli.py:216
 msgid ""
 "Helps reduce 'blotchiness' on some masks by making light shades white and "
 "dark shades black. Higher values will impact more of the mask. NB: Only "
@@ -284,7 +289,7 @@ msgstr ""
 "часть маски. Примечание: влияет только на предварительный просмотр. "
 "Установите значение 0 для выключения"
 
-#: tools/mask/cli.py:225
+#: tools/mask/cli.py:227
 msgid ""
 "R|How to format the output when processing is set to 'output'.\n"
 "L|combined: The image contains the face/frame, face mask and masked face.\n"
@@ -297,7 +302,7 @@ msgstr ""
 "L|masked: Вывести лицо/кадр как изображение rgba с маскированным лицом.\n"
 "L|mask: Выводить только маску как одноканальное изображение."
 
-#: tools/mask/cli.py:235
+#: tools/mask/cli.py:237
 msgid ""
 "R|Whether to output the whole frame or only the face box when using output "
 "processing. Only has an effect when using frames as input."