Skip to content

Set up your BEAM-based GitHub Actions workflow (Erlang, Elixir, Gleam, ...)

License

Notifications You must be signed in to change notification settings

erlef/setup-beam

Use this GitHub action with your project
Add this Action to an existing workflow or create a new one
View on Marketplace

Repository files navigation

setup-beam Action Ubuntu Windows

This action sets up an Erlang/OTP environment for use in a GitHub Actions workflow by:

  • installing Erlang/OTP
  • optionally, installing Elixir
  • optionally, installing Gleam
  • optionally, installing rebar3
  • optionally, installing hex
  • optionally, opting for strict or loose version matching
  • optionally, having problem matchers show warnings and errors on pull requests
  • optionally, using a version file (as explained in "Version file", below), to identify versions

Note: currently, this action only supports Actions' ubuntu- and windows- runtimes.

Usage

See action.yml for the action's specification.

Input versioning

Input (tools') versions are controlled via with: (check the examples below).

Strict versions

The Erlang/OTP release version specification, for example, is relatively complex, so, for best results, we recommend specifying exact versions, and setting option version-type to strict.

Version ranges

However, values like 22.x, or even >22, are also accepted, and we attempt to resolve them according to semantic versioning rules. This implicitly means version-type is loose, which is also the default value for this option.

Specify versions as strings, not numbers

Additionally, it is recommended that one specifies versions using YAML strings, as these examples do, so that numbers like 23.0 don't end up being parsed as 23, which is not equivalent.

Pre-release versions

For pre-release versions, such as v1.11.0-rc.0, use the full version specifier (v1.11.0-rc.0) and set option version-type to strict. Pre-release versions are opt-in, so 1.11.x will not match a pre-release.

"Latest" versions

Set a tool's version to latest to retrieve the latest version of a given tool. The latest version is (locally) calculated by the action based on the (retrieved) versions it knows (note: it is not the same as GitHub considers it and some repositories might propose).

If in doubt do a test run and compare the obtained release with the one you were expecting to be the latest.

Compatibility between Operating System and Erlang/OTP

This list presents the known working version combos between the target operating system and Erlang/OTP.

Operating system Erlang/OTP Status
ubuntu-18.04 17.0 - 25.3 âś…
ubuntu-20.04 21.0 - 27 âś…
ubuntu-22.04 24.2 - 27 âś…
ubuntu-24.04 24.3 - 27 âś…
windows-2019 21* - 25 âś…
windows-2022 21* - 27 âś…

Note *: prior to 23, Windows builds are only available for minor versions, e.g. 21.0, 21.3, 22.0, etc.

Self-hosted runners

Self-hosted runners need to set env. variable ImageOS to one of the following, since the action uses that to download assets:

ImageOS Operating system
ubuntu18 ubuntu-18.04
ubuntu20 ubuntu-20.04
ubuntu22 ubuntu-22.04
ubuntu24 ubuntu-24.04
win19 windows-2019
win22 windows-2022

as per the following example:

...

jobs:
  test:
    runs-on: self-hosted
    env:
      ImageOS: ubuntu20 # equivalent to runs-on ubuntu-20.04
    steps:
      - uses: actions/checkout@v4
      - uses: erlef/setup-beam@v1
        ...

Outputs

The action provides the following outputs:

Output Content
otp-version The Erlang version, e.g. OTP-26.0
elixir-version The Elixir version, e.g. v1.14-otp-26
gleam-version The Gleam version, e.g. v0.23.0
rebar3-version The rebar3 version, e.g. 3.18.0
setup-beam-version The commit unique id of the executed action version, e.g. a34c98f

accessible as ${{steps.<setup-beam-step-id>.outputs.<Output>}}, e.g. ${{steps.setup-beam.outputs.erlang-version}}

Version file

A version file is specified via input version-file (e.g..tool-versions). This allows not having to use YML input for versions, though the action does check (and will exit with error) if both inputs are set.

Note: if you're using a version file, option version-type is checked to be strict, and will make the action exit with error otherwise.

The following version file formats are supported:

Supported version elements are the same as the ones defined for the YML portion of the action, with the following correspondence.

.tool-versions format

YML .tool-versions
otp-version erlang
elixir-version elixir
gleam-version gleam
rebar3-version rebar

Alternative hex.pm mirrors

It is possible to use alternative hex.pm mirror(s), in their declared order, with option hexpm-mirrors. By default, the action will use builds.hex.pm. To use other alternative mirrors, add one per line, as shown below.

# create this in .github/workflows/ci.yml
on: push

jobs:
  test:
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v4
      - uses: erlef/setup-beam@v1
        with:
          otp-version: '26'
          # Use `cdn.jsdelivr.net/hex` as an alternative to `builds.hex.pm`
          hexpm-mirrors: https://cdn.jsdelivr.net/hex

Alternatively, you may try cdn.jsdelivr.net/hex if builds.hex.pm fails:

# create this in .github/workflows/ci.yml
on: push

jobs:
  test:
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v4
      - uses: erlef/setup-beam@v1
        with:
          otp-version: '26'
          hexpm-mirrors: |
            https://builds.hex.pm
            https://cdn.jsdelivr.net/hex

Environment variables

Base installation folders (useful for e.g. fetching headers for NIFs) are available in the following environment variables:

  • INSTALL_DIR_FOR_OTP: base folder for Erlang/OTP
  • INSTALL_DIR_FOR_ELIXIR: base folder for Elixir
  • INSTALL_DIR_FOR_GLEAM: base folder for Gleam
  • INSTALL_DIR_FOR_REBAR3: base folder for rebar3

In each of these you'll find folder bin where the appropriate binaries, platform-dependant, are found (i.e. erl, erl.exe, rebar3, rebar3.exe, ...).

Elixir Problem Matchers

The Elixir Problem Matchers in this repository are adapted from here. See MATCHER_NOTICE for license details.

Examples

Erlang/OTP + Elixir, on Ubuntu

# create this in .github/workflows/ci.yml
on: push

jobs:
  test:
    runs-on: ubuntu-20.04
    name: OTP ${{matrix.otp}} / Elixir ${{matrix.elixir}}
    strategy:
      matrix:
        otp: ['21.1', '22.2', '23.3']
        elixir: ['1.8.2', '1.9.4']
    steps:
      - uses: actions/checkout@v4
      - uses: erlef/setup-beam@v1
        with:
          otp-version: ${{matrix.otp}}
          elixir-version: ${{matrix.elixir}}
      - run: mix deps.get
      - run: mix test

Erlang/OTP + rebar3, on Ubuntu

# create this in .github/workflows/ci.yml
on: push

jobs:
  test:
    runs-on: ubuntu-20.04
    name: Erlang/OTP ${{matrix.otp}} / rebar3 ${{matrix.rebar3}}
    strategy:
      matrix:
        otp: ['21.1', '22.2', '23.3']
        rebar3: ['3.14.1', '3.14.3']
    steps:
      - uses: actions/checkout@v4
      - uses: erlef/setup-beam@v1
        with:
          otp-version: ${{matrix.otp}}
          rebar3-version: ${{matrix.rebar3}}
      - run: rebar3 ct

Erlang/OTP + rebar3, on Windows

# create this in .github/workflows/ci.yml
on: push

jobs:
  test:
    runs-on: windows-2022
    steps:
      - uses: actions/checkout@v4
      - uses: erlef/setup-beam@v1
        with:
          otp-version: '24'
          rebar3-version: '3.16.1'
      - run: rebar3 ct

Gleam on Ubuntu

# create this in .github/workflows/ci.yml
on: push

jobs:
  test:
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v4
      - uses: erlef/setup-beam@v1
        with:
          otp-version: '24'
          gleam-version: '0.23.0-rc1'
      - run: gleam test

Gleam on Ubuntu without OTP

# create this in .github/workflows/ci.yml
on: push

jobs:
  test:
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v4
      - uses: erlef/setup-beam@v1
        with:
          otp-version: false
          gleam-version: '0.23.0-rc1'
      - run: gleam check

Note: the otp-version: false input is only applicable when installing Gleam.

The project

Versioning

setup-beam has three version paths, described below, for example version 1.8.0:

  • @v1: the latest in the 1.y.z series (this tag is movable),
  • @v1.8: the latest in the 1.8.z series (this tag is movable),
  • @v1.8.0: release 1.8.0 (this tag is not movable).

We make a real effort to not introduce incompatibilities without changing the major version number. To be extra safe against changes causing issues in your CI you should specify an exact version with @vx.y.z.

License

The scripts and documentation in this project are released under the MIT license.

Contributing

Check out this doc.

Code of Conduct

This project's code of conduct is made explicit in CODE_OF_CONDUCT.md.

Security

This project's security policy is made explicit in SECURITY.md.