This repository contains a bunch of ESPHome configurations for https://athom.tech devices.
If you are prompted that there is not enough space, you should upgrade ESP8266_MINI.bin first
- mini is a transit firmware, after running, it will generate a hotspot of "ESP_UPDATE_XXXXXX"
- Connect to the hotspot and visit
http://192.168.4.1/updatein the browser - Upload updated ESPHome firmware
- Select firmware upgrade, upload
tasmota.bin.gzand click Update, Please don't choosetasmota.bin - Download Tasmota firmware here http://ota.tasmota.com/tasmota/release/tasmota.bin.gz
- First execute
SetOption78 1in the console of Tasmota - Select firmware upgrade, upload
tasmota-minimal.bin.gzand click start upgrade - Select the firmware upgrade again, upload the firmware of ESPHome and click to start upgrade
| device | picture | file name | notice |
|---|---|---|---|
| Athom_Plug_V2 |        |
athom-smart-plug-v2.yaml | |
| Athom_Wall_Outlet |  |
athom-wall-outlet.yaml | |
| Athom_1Gang_Switch |    |
athom-sw01.yaml | |
| Athom_2Gang_Switch |   |
athom-sw02.yaml | |
| Athom_3Gang_Switch |   |
athom-sw03.yaml | |
| Athom_4Gang_Switch |  |
athom-sw04.yaml | |
| Athom_7W_Bulb Athom_GU10_Bulb |
  |
athom-rgbww-light.yaml | |
| Athom_15W_Bulb |  |
athom-rgbct-light.yaml | |
| Athom_12W_Bulb |  |
athom-rgbct-light.yaml | |
| Athom_RGB_Controller |  |
athom-rgb-light.yaml | |
| Athom_Addressable_Light_Strip_Controller |  |
athom-ws2812b.yaml | |
| Athom_High_Power_RGBW_Light_Strip_Controller |  |
athom-rgbw-light.yaml | |
| Athom_High_Power_Addressable_Light_Strip_Controller |  |
athom-ls-4p-3wire.yaml | |
| Athom_Mini_Switch |  |
athom-mini-switch.yaml | |
| Athom_CB02_Switch |  |
athom-cb02.yaml | |
| Athom_Presence_Sensor |  |
athom-presence-sensor.yaml | |
| Athom_Garage_Door_Opener |  |
athom-garage-door.yaml | |
| Athom_Plug |   |
athom-smart-plug.yaml |