Skip to content

farmmanic/WireGuard-ESP32-Arduino

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

38 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

WireGuard Implementation for ESP32 Arduino

This is an implementation of the WireGuard® for ESP32 Arduino.

Almost all of this code is based on the WireGuard Implementation for lwIP, but some potion of the code is adjusted to build with ESP32 Arduino.

How to use

  1. Include WireGuard-ESP32.h at the early part of the sketch.
#include <WireGuard-ESP32.h>
  1. Define the instance of the WireGuard class at module level.
static WireGuard wg;
  1. Connect to WiFi AP by using WiFi class.
WiFi.begin(ssid, password);
while( !WiFi.isConnected() ) {
    delay(1000);
}
  1. Sync the system time via NTP.
configTime(9 * 60 * 60, 0, "ntp.jst.mfeed.ad.jp", "ntp.nict.jp", "time.google.com");
  1. Start the WireGuard interface.
wg.begin(
    local_ip,           // IP address of the local interface
    private_key,        // Private key of the local interface
    endpoint_address,   // Address of the endpoint peer.
    public_key,         // Public key of the endpoint peer.
    endpoint_port);     // Port pf the endpoint peer.

You can see an example sketch uptime_post.ino, which connects SORACOM Arc WireGuard endpoint and post uptime to SORACOM Harvest via WireGuard connection.

License

The original WireGuard implementation for lwIP is licensed under BSD 3 clause license so the code in this repository also licensed under the same license.

Original license is below:

The code is copyrighted under BSD 3 clause Copyright (c) 2021 Daniel Hope (www.floorsense.nz)

See LICENSE for details

About

WireGuard implementation for ESP32 Arduino

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C 96.1%
  • C++ 3.9%