Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Conflicts:
	arch/s390/net/bpf_jit_comp.c
	drivers/net/ethernet/ti/netcp_ethss.c
	net/bridge/br_multicast.c
	net/ipv4/ip_fragment.c

All four conflicts were cases of simple overlapping
changes.

Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt

@@ -35,3 +35,6 @@ the PCIe specification.
 
                       NOTE: this only applies to the SMMU itself, not
                       masters connected upstream of the SMMU.
+
+- hisilicon,broken-prefetch-cmd
+                    : Avoid sending CMD_PREFETCH_* commands to the SMMU.

Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt

@@ -17,7 +17,6 @@ Required properties:
 	       "fsl,imx6sx-usdhc"
 
 Optional properties:
-- fsl,cd-controller : Indicate to use controller internal card detection
 - fsl,wp-controller : Indicate to use controller internal write protection
 - fsl,delay-line : Specify the number of delay cells for override mode.
   This is used to set the clock delay for DLL(Delay Line) on override mode
@@ -35,7 +34,6 @@ esdhc@70004000 {
 	compatible = "fsl,imx51-esdhc";
 	reg = <0x70004000 0x4000>;
 	interrupts = <1>;
-	fsl,cd-controller;
 	fsl,wp-controller;
 };
 

Documentation/devicetree/bindings/sound/mt8173-max98090.txt

@@ -3,11 +3,13 @@ MT8173 with MAX98090 CODEC
 Required properties:
 - compatible : "mediatek,mt8173-max98090"
 - mediatek,audio-codec: the phandle of the MAX98090 audio codec
+- mediatek,platform: the phandle of MT8173 ASoC platform
 
 Example:
 
 	sound {
 		compatible = "mediatek,mt8173-max98090";
 		mediatek,audio-codec = <&max98090>;
+		mediatek,platform = <&afe>;
 	};
 

Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt

@@ -3,11 +3,13 @@ MT8173 with RT5650 RT5676 CODECS
 Required properties:
 - compatible : "mediatek,mt8173-rt5650-rt5676"
 - mediatek,audio-codec: the phandles of rt5650 and rt5676 codecs
+- mediatek,platform: the phandle of MT8173 ASoC platform
 
 Example:
 
 	sound {
 		compatible = "mediatek,mt8173-rt5650-rt5676";
 		mediatek,audio-codec = <&rt5650 &rt5676>;
+		mediatek,platform = <&afe>;
 	};
 

Documentation/devicetree/bindings/spi/spi-ath79.txt

@@ -3,7 +3,7 @@ Binding for Qualcomm Atheros AR7xxx/AR9xxx SPI controller
 Required properties:
 - compatible: has to be "qca,<soc-type>-spi", "qca,ar7100-spi" as fallback.
 - reg: Base address and size of the controllers memory area
-- clocks: phandle to the AHB clock.
+- clocks: phandle of the AHB clock.
 - clock-names: has to be "ahb".
 - #address-cells: <1>, as required by generic SPI binding.
 - #size-cells: <0>, also as required by generic SPI binding.
@@ -12,9 +12,9 @@ Child nodes as per the generic SPI binding.
 
 Example:
 
-	spi@1F000000 {
+	spi@1f000000 {
 		compatible = "qca,ar9132-spi", "qca,ar7100-spi";
-		reg = <0x1F000000 0x10>;
+		reg = <0x1f000000 0x10>;
 
 		clocks = <&pll 2>;
 		clock-names = "ahb";

Documentation/hwmon/nct7904

@@ -35,11 +35,11 @@ temp1_input		Local temperature (1/1000 degree,
 temp[2-9]_input		CPU temperatures (1/1000 degree,
 			0.125 degree resolution)
 
-fan[1-4]_mode		R/W, 0/1 for manual or SmartFan mode
+pwm[1-4]_enable		R/W, 1/2 for manual or SmartFan mode
 			Setting SmartFan mode is supported only if it has been
 			previously configured by BIOS (or configuration EEPROM)
 
-fan[1-4]_pwm		R/O in SmartFan mode, R/W in manual control mode
+pwm[1-4]		R/O in SmartFan mode, R/W in manual control mode
 
 The driver checks sensor control registers and does not export the sensors
 that are not enabled. Anyway, a sensor that is enabled may actually be not

Documentation/target/tcm_mod_builder.py

@@ -199,7 +199,8 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
 	buf += "#include <linux/string.h>\n"
 	buf += "#include <linux/configfs.h>\n"
 	buf += "#include <linux/ctype.h>\n"
-	buf += "#include <asm/unaligned.h>\n\n"
+	buf += "#include <asm/unaligned.h>\n"
+	buf += "#include <scsi/scsi_proto.h>\n\n"
 	buf += "#include <target/target_core_base.h>\n"
 	buf += "#include <target/target_core_fabric.h>\n"
 	buf += "#include <target/target_core_fabric_configfs.h>\n"
@@ -230,8 +231,14 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
 	buf += "	}\n"
 	buf += "	tpg->" + fabric_mod_port + " = " + fabric_mod_port + ";\n"
 	buf += "	tpg->" + fabric_mod_port + "_tpgt = tpgt;\n\n"
-	buf += "	ret = core_tpg_register(&" + fabric_mod_name + "_ops, wwn,\n"
-	buf += "				&tpg->se_tpg, SCSI_PROTOCOL_SAS);\n"
+
+	if proto_ident == "FC":
+		buf += "	ret = core_tpg_register(wwn, &tpg->se_tpg, SCSI_PROTOCOL_FCP);\n"
+	elif proto_ident == "SAS":
+		buf += "	ret = core_tpg_register(wwn, &tpg->se_tpg, SCSI_PROTOCOL_SAS);\n"
+	elif proto_ident == "iSCSI":
+		buf += "	ret = core_tpg_register(wwn, &tpg->se_tpg, SCSI_PROTOCOL_ISCSI);\n"
+
 	buf += "	if (ret < 0) {\n"
 	buf += "		kfree(tpg);\n"
 	buf += "		return NULL;\n"
@@ -292,7 +299,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
 
 	buf += "static const struct target_core_fabric_ops " + fabric_mod_name + "_ops = {\n"
 	buf += "	.module				= THIS_MODULE,\n"
-	buf += "	.name				= " + fabric_mod_name + ",\n"
+	buf += "	.name				= \"" + fabric_mod_name + "\",\n"
 	buf += "	.get_fabric_name		= " + fabric_mod_name + "_get_fabric_name,\n"
 	buf += "	.tpg_get_wwn			= " + fabric_mod_name + "_get_fabric_wwn,\n"
 	buf += "	.tpg_get_tag			= " + fabric_mod_name + "_get_tag,\n"
@@ -322,17 +329,17 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
 	buf += "	.fabric_make_tpg		= " + fabric_mod_name + "_make_tpg,\n"
 	buf += "	.fabric_drop_tpg		= " + fabric_mod_name + "_drop_tpg,\n"
 	buf += "\n"
-	buf += "	.tfc_wwn_attrs			= " + fabric_mod_name + "_wwn_attrs;\n"
+	buf += "	.tfc_wwn_attrs			= " + fabric_mod_name + "_wwn_attrs,\n"
 	buf += "};\n\n"
 
 	buf += "static int __init " + fabric_mod_name + "_init(void)\n"
 	buf += "{\n"
-	buf += "	return target_register_template(" + fabric_mod_name + "_ops);\n"
+	buf += "	return target_register_template(&" + fabric_mod_name + "_ops);\n"
 	buf += "};\n\n"
 
 	buf += "static void __exit " + fabric_mod_name + "_exit(void)\n"
 	buf += "{\n"
-	buf += "	target_unregister_template(" + fabric_mod_name + "_ops);\n"
+	buf += "	target_unregister_template(&" + fabric_mod_name + "_ops);\n"
 	buf += "};\n\n"
 
 	buf += "MODULE_DESCRIPTION(\"" + fabric_mod_name.upper() + " series fabric driver\");\n"

MAINTAINERS

@@ -5899,7 +5899,6 @@ S:	Supported
 F:	Documentation/s390/kvm.txt
 F:	arch/s390/include/asm/kvm*
 F:	arch/s390/kvm/
-F:	drivers/s390/kvm/
 
 KERNEL VIRTUAL MACHINE (KVM) FOR ARM
 M:	Christoffer Dall <christoffer.dall@linaro.org>
@@ -6848,6 +6847,12 @@ T:	git git://linuxtv.org/anttip/media_tree.git
 S:	Maintained
 F:	drivers/media/usb/msi2500/
 
+MSYSTEMS DISKONCHIP G3 MTD DRIVER
+M:	Robert Jarzmik <robert.jarzmik@free.fr>
+L:	linux-mtd@lists.infradead.org
+S:	Maintained
+F:	drivers/mtd/devices/docg3*
+
 MT9M032 APTINA SENSOR DRIVER
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
@@ -10912,6 +10917,15 @@ F:	drivers/block/virtio_blk.c
 F:	include/linux/virtio_*.h
 F:	include/uapi/linux/virtio_*.h
 
+VIRTIO DRIVERS FOR S390
+M:	Christian Borntraeger <borntraeger@de.ibm.com>
+M:	Cornelia Huck <cornelia.huck@de.ibm.com>
+L:	linux-s390@vger.kernel.org
+L:	virtualization@lists.linux-foundation.org
+L:	kvm@vger.kernel.org
+S:	Supported
+F:	drivers/s390/virtio/
+
 VIRTIO GPU DRIVER
 M:	David Airlie <airlied@linux.ie>
 M:	Gerd Hoffmann <kraxel@redhat.com>

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 2
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME = Hurr durr I'ma sheep
 
 # *DOCUMENTATION*

arch/arm/boot/dts/imx25-pdk.dts

@@ -10,6 +10,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include "imx25.dtsi"
 
@@ -114,8 +115,8 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio2 1 0>;
-	wp-gpios = <&gpio2 0 0>;
+	cd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx51-apf51dev.dts

@@ -98,7 +98,7 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
 	status = "okay";
 };

arch/arm/boot/dts/imx53-ard.dts

@@ -103,8 +103,8 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 1 0>;
-	wp-gpios = <&gpio1 9 0>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx53-m53evk.dts

@@ -124,8 +124,8 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 1 0>;
-	wp-gpios = <&gpio1 9 0>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx53-qsb-common.dtsi

@@ -147,8 +147,8 @@
 &esdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc3>;
-	cd-gpios = <&gpio3 11 0>;
-	wp-gpios = <&gpio3 12 0>;
+	cd-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
 	bus-width = <8>;
 	status = "okay";
 };

arch/arm/boot/dts/imx53-smd.dts

@@ -41,8 +41,8 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio3 13 0>;
-	wp-gpios = <&gpio4 11 0>;
+	cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx53-tqma53.dtsi

@@ -41,8 +41,8 @@
 	pinctrl-0 = <&pinctrl_esdhc2>,
 		    <&pinctrl_esdhc2_cdwp>;
 	vmmc-supply = <&reg_3p3v>;
-	wp-gpios = <&gpio1 2 0>;
-	cd-gpios = <&gpio1 4 0>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	status = "disabled";
 };
 

arch/arm/boot/dts/imx53-tx53.dtsi

@@ -183,15 +183,15 @@
 };
 
 &esdhc1 {
-	cd-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
 	fsl,wp-controller;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
 	status = "okay";
 };
 
 &esdhc2 {
-	cd-gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
 	fsl,wp-controller;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc2>;

arch/arm/boot/dts/imx53-voipac-bsb.dts

@@ -119,8 +119,8 @@
 &esdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc2>;
-	cd-gpios = <&gpio3 25 0>;
-	wp-gpios = <&gpio2 19 0>;
+	cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6dl-riotboard.dts

@@ -305,17 +305,17 @@
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio1 4 0>;
-	wp-gpios = <&gpio1 2 0>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
 
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 0>;
-	wp-gpios = <&gpio7 1 0>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6q-arm2.dts

@@ -11,6 +11,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "imx6q.dtsi"
 
 / {
@@ -196,8 +197,8 @@
 };
 
 &usdhc3 {
-	cd-gpios = <&gpio6 11 0>;
-	wp-gpios = <&gpio6 14 0>;
+	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3

arch/arm/boot/dts/imx6q-gk802.dts

@@ -7,6 +7,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "imx6q.dtsi"
 
 / {
@@ -161,7 +162,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <4>;
-	cd-gpios = <&gpio6 11 0>;
+	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6q-tbs2910.dts

@@ -251,7 +251,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <4>;
-	cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
@@ -260,7 +260,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <4>;
-	cd-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";

arch/arm/boot/dts/imx6qdl-aristainetos.dtsi

@@ -173,15 +173,15 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };