Merge tag 'powerpc-4.12-1' of git://git.kernel.org/pub/scm/linux/kern…

…el/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Highlights include:

   - Larger virtual address space on 64-bit server CPUs. By default we
     use a 128TB virtual address space, but a process can request access
     to the full 512TB by passing a hint to mmap().

   - Support for the new Power9 "XIVE" interrupt controller.

   - TLB flushing optimisations for the radix MMU on Power9.

   - Support for CAPI cards on Power9, using the "Coherent Accelerator
     Interface Architecture 2.0".

   - The ability to configure the mmap randomisation limits at build and
     runtime.

   - Several small fixes and cleanups to the kprobes code, as well as
     support for KPROBES_ON_FTRACE.

   - Major improvements to handling of system reset interrupts,
     correctly treating them as NMIs, giving them a dedicated stack and
     using a new hypervisor call to trigger them, all of which should
     aid debugging and robustness.

   - Many fixes and other minor enhancements.

  Thanks to: Alastair D'Silva, Alexey Kardashevskiy, Alistair Popple,
  Andrew Donnellan, Aneesh Kumar K.V, Anshuman Khandual, Anton
  Blanchard, Balbir Singh, Ben Hutchings, Benjamin Herrenschmidt,
  Bhupesh Sharma, Chris Packham, Christian Zigotzky, Christophe Leroy,
  Christophe Lombard, Daniel Axtens, David Gibson, Gautham R. Shenoy,
  Gavin Shan, Geert Uytterhoeven, Guilherme G. Piccoli, Hamish Martin,
  Hari Bathini, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Mahesh J
  Salgaonkar, Mahesh Salgaonkar, Masami Hiramatsu, Matt Brown, Matthew
  R. Ochs, Michael Neuling, Naveen N. Rao, Nicholas Piggin, Oliver
  O'Halloran, Pan Xinhui, Paul Mackerras, Rashmica Gupta, Russell
  Currey, Sukadev Bhattiprolu, Thadeu Lima de Souza Cascardo, Tobin C.
  Harding, Tyrel Datwyler, Uma Krishnan, Vaibhav Jain, Vipin K Parashar,
  Yang Shi"

* tag 'powerpc-4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (214 commits)
  powerpc/64s: Power9 has no LPCR[VRMASD] field so don't set it
  powerpc/powernv: Fix TCE kill on NVLink2
  powerpc/mm/radix: Drop support for CPUs without lockless tlbie
  powerpc/book3s/mce: Move add_taint() later in virtual mode
  powerpc/sysfs: Move #ifdef CONFIG_HOTPLUG_CPU out of the function body
  powerpc/smp: Document irq enable/disable after migrating IRQs
  powerpc/mpc52xx: Don't select user-visible RTAS_PROC
  powerpc/powernv: Document cxl dependency on special case in pnv_eeh_reset()
  powerpc/eeh: Clean up and document event handling functions
  powerpc/eeh: Avoid use after free in eeh_handle_special_event()
  cxl: Mask slice error interrupts after first occurrence
  cxl: Route eeh events to all drivers in cxl_pci_error_detected()
  cxl: Force context lock during EEH flow
  powerpc/64: Allow CONFIG_RELOCATABLE if COMPILE_TEST
  powerpc/xmon: Teach xmon oops about radix vectors
  powerpc/mm/hash: Fix off-by-one in comment about kernel contexts ids
  powerpc/pseries: Enable VFIO
  powerpc/powernv: Fix iommu table size calculation hook for small tables
  powerpc/powernv: Check kzalloc() return value in pnv_pci_table_alloc
  powerpc: Add arch/powerpc/tools directory
  ...

Documentation/features/debug/kprobes-on-ftrace/arch-support.txt

@@ -26,7 +26,7 @@
     |       nios2: | TODO |
     |    openrisc: | TODO |
     |      parisc: | TODO |
-    |     powerpc: | TODO |
+    |     powerpc: |  ok  |
     |        s390: | TODO |
     |       score: | TODO |
     |          sh: | TODO |

Documentation/powerpc/cxl.txt

@@ -21,7 +21,7 @@ Introduction
 Hardware overview
 =================
 
-          POWER8               FPGA
+         POWER8/9             FPGA
        +----------+        +---------+
        |          |        |         |
        |   CPU    |        |   AFU   |
@@ -34,7 +34,7 @@ Hardware overview
        |   | CAPP |<------>|         |
        +---+------+  PCIE  +---------+
 
-    The POWER8 chip has a Coherently Attached Processor Proxy (CAPP)
+    The POWER8/9 chip has a Coherently Attached Processor Proxy (CAPP)
     unit which is part of the PCIe Host Bridge (PHB). This is managed
     by Linux by calls into OPAL. Linux doesn't directly program the
     CAPP.
@@ -59,6 +59,17 @@ Hardware overview
     the fault. The context to which this fault is serviced is based on
     who owns that acceleration function.
 
+    POWER8 <-----> PSL Version 8 is compliant to the CAIA Version 1.0.
+    POWER9 <-----> PSL Version 9 is compliant to the CAIA Version 2.0.
+    This PSL Version 9 provides new features such as:
+    * Interaction with the nest MMU on the P9 chip.
+    * Native DMA support.
+    * Supports sending ASB_Notify messages for host thread wakeup.
+    * Supports Atomic operations.
+    * ....
+
+    Cards with a PSL9 won't work on a POWER8 system and cards with a
+    PSL8 won't work on a POWER9 system.
 
 AFU Modes
 =========

Documentation/powerpc/firmware-assisted-dump.txt

@@ -105,21 +105,21 @@ memory is held.
 
 If there is no waiting dump data, then only the memory required
 to hold CPU state, HPTE region, boot memory dump and elfcore
-header, is reserved at the top of memory (see Fig. 1). This area
-is *not* released: this region will be kept permanently reserved,
-so that it can act as a receptacle for a copy of the boot memory
-content in addition to CPU state and HPTE region, in the case a
-crash does occur.
+header, is usually reserved at an offset greater than boot memory
+size (see Fig. 1). This area is *not* released: this region will
+be kept permanently reserved, so that it can act as a receptacle
+for a copy of the boot memory content in addition to CPU state
+and HPTE region, in the case a crash does occur.
 
   o Memory Reservation during first kernel
 
-  Low memory                                        Top of memory
+  Low memory                                         Top of memory
   0      boot memory size                                       |
-  |           |                       |<--Reserved dump area -->|
-  V           V                       |   Permanent Reservation V
-  +-----------+----------/ /----------+---+----+-----------+----+
-  |           |                       |CPU|HPTE|  DUMP     |ELF |
-  +-----------+----------/ /----------+---+----+-----------+----+
+  |           |                |<--Reserved dump area -->|      |
+  V           V                |   Permanent Reservation |      V
+  +-----------+----------/ /---+---+----+-----------+----+------+
+  |           |                |CPU|HPTE|  DUMP     |ELF |      |
+  +-----------+----------/ /---+---+----+-----------+----+------+
         |                                           ^
         |                                           |
         \                                           /
@@ -135,12 +135,12 @@ crash does occur.
   0      boot memory size                                       |
   |           |<------------- Reserved dump area ----------- -->|
   V           V                                                 V
-  +-----------+----------/ /----------+---+----+-----------+----+
-  |           |                       |CPU|HPTE|  DUMP     |ELF |
-  +-----------+----------/ /----------+---+----+-----------+----+
-        |                                                    |
-        V                                                    V
-   Used by second                                    /proc/vmcore
+  +-----------+----------/ /---+---+----+-----------+----+------+
+  |           |                |CPU|HPTE|  DUMP     |ELF |      |
+  +-----------+----------/ /---+---+----+-----------+----+------+
+        |                                              |
+        V                                              V
+   Used by second                                /proc/vmcore
    kernel to boot
                    Fig. 2
 

MAINTAINERS

@@ -5310,6 +5310,7 @@ M:	Scott Wood <oss@buserror.net>
 L:	linuxppc-dev@lists.ozlabs.org
 L:	linux-arm-kernel@lists.infradead.org
 S:	Maintained
+F:	Documentation/devicetree/bindings/powerpc/fsl/
 F:	drivers/soc/fsl/
 F:	include/linux/fsl/
 
@@ -7568,7 +7569,7 @@ Q:	http://patchwork.ozlabs.org/project/linuxppc-dev/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git
 S:	Supported
 F:	Documentation/ABI/stable/sysfs-firmware-opal-*
-F:	Documentation/devicetree/bindings/powerpc/opal/
+F:	Documentation/devicetree/bindings/powerpc/
 F:	Documentation/devicetree/bindings/rtc/rtc-opal.txt
 F:	Documentation/devicetree/bindings/i2c/i2c-opal.txt
 F:	Documentation/powerpc/

arch/powerpc/Kconfig

@@ -22,6 +22,48 @@ config MMU
 	bool
 	default y
 
+config ARCH_MMAP_RND_BITS_MAX
+	# On Book3S 64, the default virtual address space for 64-bit processes
+	# is 2^47 (128TB). As a maximum, allow randomisation to consume up to
+	# 32T of address space (2^45), which should ensure a reasonable gap
+	# between bottom-up and top-down allocations for applications that
+	# consume "normal" amounts of address space. Book3S 64 only supports 64K
+	# and 4K page sizes.
+	default 29 if PPC_BOOK3S_64 && PPC_64K_PAGES # 29 = 45 (32T) - 16 (64K)
+	default 33 if PPC_BOOK3S_64		     # 33 = 45 (32T) - 12 (4K)
+	#
+	# On all other 64-bit platforms (currently only Book3E), the virtual
+	# address space is 2^46 (64TB). Allow randomisation to consume up to 16T
+	# of address space (2^44). Only 4K page sizes are supported.
+	default 32 if 64BIT	# 32 = 44 (16T) - 12 (4K)
+	#
+	# For 32-bit, use the compat values, as they're the same.
+	default ARCH_MMAP_RND_COMPAT_BITS_MAX
+
+config ARCH_MMAP_RND_BITS_MIN
+	# Allow randomisation to consume up to 1GB of address space (2^30).
+	default 14 if 64BIT && PPC_64K_PAGES	# 14 = 30 (1GB) - 16 (64K)
+	default 18 if 64BIT			# 18 = 30 (1GB) - 12 (4K)
+	#
+	# For 32-bit, use the compat values, as they're the same.
+	default ARCH_MMAP_RND_COMPAT_BITS_MIN
+
+config ARCH_MMAP_RND_COMPAT_BITS_MAX
+	# Total virtual address space for 32-bit processes is 2^31 (2GB).
+	# Allow randomisation to consume up to 512MB of address space (2^29).
+	default 11 if PPC_256K_PAGES	# 11 = 29 (512MB) - 18 (256K)
+	default 13 if PPC_64K_PAGES	# 13 = 29 (512MB) - 16 (64K)
+	default 15 if PPC_16K_PAGES 	# 15 = 29 (512MB) - 14 (16K)
+	default 17			# 17 = 29 (512MB) - 12 (4K)
+
+config ARCH_MMAP_RND_COMPAT_BITS_MIN
+	# Total virtual address space for 32-bit processes is 2^31 (2GB).
+	# Allow randomisation to consume up to 8MB of address space (2^23).
+	default 5 if PPC_256K_PAGES	#  5 = 23 (8MB) - 18 (256K)
+	default 7 if PPC_64K_PAGES	#  7 = 23 (8MB) - 16 (64K)
+	default 9 if PPC_16K_PAGES	#  9 = 23 (8MB) - 14 (16K)
+	default 11			# 11 = 23 (8MB) - 12 (4K)
+
 config HAVE_SETUP_PER_CPU_AREA
 	def_bool PPC64
 
@@ -38,6 +80,11 @@ config NR_IRQS
 	  /proc/interrupts. If you configure your system to have too few,
 	  drivers will fail to load or worse - handle with care.
 
+config NMI_IPI
+	bool
+	depends on SMP && (DEBUGGER || KEXEC_CORE)
+	default y
+
 config STACKTRACE_SUPPORT
 	bool
 	default y
@@ -119,6 +166,8 @@ config PPC
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_JUMP_LABEL
 	select HAVE_ARCH_KGDB
+	select HAVE_ARCH_MMAP_RND_BITS
+	select HAVE_ARCH_MMAP_RND_COMPAT_BITS	if COMPAT
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_CBPF_JIT			if !PPC64
@@ -141,6 +190,7 @@ config PPC
 	select HAVE_IRQ_EXIT_ON_IRQ_STACK
 	select HAVE_KERNEL_GZIP
 	select HAVE_KPROBES
+	select HAVE_KPROBES_ON_FTRACE
 	select HAVE_KRETPROBES
 	select HAVE_LIVEPATCH			if HAVE_DYNAMIC_FTRACE_WITH_REGS
 	select HAVE_MEMBLOCK
@@ -489,7 +539,7 @@ config KEXEC_FILE
 
 config RELOCATABLE
 	bool "Build a relocatable kernel"
-	depends on (PPC64 && !COMPILE_TEST) || (FLATMEM && (44x || FSL_BOOKE))
+	depends on PPC64 || (FLATMEM && (44x || FSL_BOOKE))
 	select NONSTATIC_KERNEL
 	select MODULE_REL_CRCS if MODVERSIONS
 	help
@@ -523,7 +573,7 @@ config RELOCATABLE_TEST
 config CRASH_DUMP
 	bool "Build a kdump crash kernel"
 	depends on PPC64 || 6xx || FSL_BOOKE || (44x && !SMP)
-	select RELOCATABLE if (PPC64 && !COMPILE_TEST) || 44x || FSL_BOOKE
+	select RELOCATABLE if PPC64 || 44x || FSL_BOOKE
 	help
 	  Build a kernel suitable for use as a kdump capture kernel.
 	  The same kernel binary can be used as production kernel and dump
@@ -585,7 +635,7 @@ config ARCH_SPARSEMEM_ENABLE
 
 config ARCH_SPARSEMEM_DEFAULT
 	def_bool y
-	depends on (SMP && PPC_PSERIES) || PPC_PS3
+	depends on PPC_BOOK3S_64
 
 config SYS_SUPPORTS_HUGETLBFS
 	bool
@@ -677,6 +727,16 @@ config PPC_256K_PAGES
 
 endchoice
 
+config THREAD_SHIFT
+	int "Thread shift" if EXPERT
+	range 13 15
+	default "15" if PPC_256K_PAGES
+	default "14" if PPC64
+	default "13"
+	help
+	  Used to define the stack size. The default is almost always what you
+	  want. Only change this if you know what you are doing.
+
 config FORCE_MAX_ZONEORDER
 	int "Maximum zone order"
 	range 8 9 if PPC64 && PPC_64K_PAGES

arch/powerpc/Makefile

@@ -136,7 +136,7 @@ CFLAGS-$(CONFIG_GENERIC_CPU) += -mcpu=powerpc64
 endif
 
 ifdef CONFIG_MPROFILE_KERNEL
-    ifeq ($(shell $(srctree)/arch/powerpc/scripts/gcc-check-mprofile-kernel.sh $(CC) -I$(srctree)/include -D__KERNEL__),OK)
+    ifeq ($(shell $(srctree)/arch/powerpc/tools/gcc-check-mprofile-kernel.sh $(CC) -I$(srctree)/include -D__KERNEL__),OK)
         CC_FLAGS_FTRACE := -pg -mprofile-kernel
         KBUILD_CPPFLAGS += -DCC_USING_MPROFILE_KERNEL
     else
@@ -274,17 +274,6 @@ PHONY += $(BOOT_TARGETS1) $(BOOT_TARGETS2)
 
 boot := arch/$(ARCH)/boot
 
-ifeq ($(CONFIG_RELOCATABLE),y)
-quiet_cmd_relocs_check = CALL    $<
-      cmd_relocs_check = $(CONFIG_SHELL) $< "$(OBJDUMP)" "$(obj)/vmlinux"
-
-PHONY += relocs_check
-relocs_check: arch/powerpc/relocs_check.sh vmlinux
-	$(call cmd,relocs_check)
-
-zImage: relocs_check
-endif
-
 $(BOOT_TARGETS1): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
 $(BOOT_TARGETS2): vmlinux

arch/powerpc/Makefile.postlink

@@ -0,0 +1,34 @@
+# ===========================================================================
+# Post-link powerpc pass
+# ===========================================================================
+#
+# 1. Check that vmlinux relocations look sane
+
+PHONY := __archpost
+__archpost:
+
+include include/config/auto.conf
+include scripts/Kbuild.include
+
+quiet_cmd_relocs_check = CHKREL  $@
+      cmd_relocs_check = $(CONFIG_SHELL) $(srctree)/arch/powerpc/tools/relocs_check.sh "$(OBJDUMP)" "$@"
+
+# `@true` prevents complaint when there is nothing to be done
+
+vmlinux: FORCE
+	@true
+ifdef CONFIG_RELOCATABLE
+	$(call if_changed,relocs_check)
+endif
+
+%.ko: FORCE
+	@true
+
+clean:
+	@true
+
+PHONY += FORCE clean
+
+FORCE:
+
+.PHONY: $(PHONY)

arch/powerpc/configs/powernv_defconfig

@@ -33,7 +33,7 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_BPF_SYSCALL=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
+CONFIG_OPROFILE=m
 CONFIG_KPROBES=y
 CONFIG_JUMP_LABEL=y
 CONFIG_MODULES=y
@@ -261,7 +261,7 @@ CONFIG_NILFS2_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
 CONFIG_OVERLAY_FS=m
-CONFIG_ISO9660_FS=m
+CONFIG_ISO9660_FS=y
 CONFIG_UDF_FS=m
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=m
@@ -306,7 +306,7 @@ CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_CCM=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPT_CRC32C_VPMSUM=m
+CONFIG_CRYPTO_CRC32C_VPMSUM=m
 CONFIG_CRYPTO_MD5_PPC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA256=y

arch/powerpc/configs/ppc64_defconfig

@@ -19,7 +19,7 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_BPF_SYSCALL=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
+CONFIG_OPROFILE=m
 CONFIG_KPROBES=y
 CONFIG_JUMP_LABEL=y
 CONFIG_MODULES=y
@@ -290,7 +290,7 @@ CONFIG_NILFS2_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
 CONFIG_OVERLAY_FS=m
-CONFIG_ISO9660_FS=m
+CONFIG_ISO9660_FS=y
 CONFIG_UDF_FS=m
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=m
@@ -339,7 +339,7 @@ CONFIG_PPC_EARLY_DEBUG=y
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPT_CRC32C_VPMSUM=m
+CONFIG_CRYPTO_CRC32C_VPMSUM=m
 CONFIG_CRYPTO_MD5_PPC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA256=y

arch/powerpc/configs/pseries_defconfig

@@ -34,7 +34,7 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_BPF_SYSCALL=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
+CONFIG_OPROFILE=m
 CONFIG_KPROBES=y
 CONFIG_JUMP_LABEL=y
 CONFIG_MODULES=y
@@ -259,7 +259,7 @@ CONFIG_NILFS2_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
 CONFIG_OVERLAY_FS=m
-CONFIG_ISO9660_FS=m
+CONFIG_ISO9660_FS=y
 CONFIG_UDF_FS=m
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=m
@@ -303,7 +303,7 @@ CONFIG_XMON=y
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPT_CRC32C_VPMSUM=m
+CONFIG_CRYPTO_CRC32C_VPMSUM=m
 CONFIG_CRYPTO_MD5_PPC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA256=y

arch/powerpc/include/asm/asm-prototypes.h

@@ -17,6 +17,8 @@
 #include <asm/checksum.h>
 #include <linux/uaccess.h>
 #include <asm/epapr_hcalls.h>
+#include <asm/dcr.h>
+#include <asm/mmu_context.h>
 
 #include <uapi/asm/ucontext.h>
 
@@ -120,6 +122,8 @@ extern s64 __ashrdi3(s64, int);
 extern int __cmpdi2(s64, s64);
 extern int __ucmpdi2(u64, u64);
 
+/* tracing */
 void _mcount(void);
+unsigned long prepare_ftrace_return(unsigned long parent, unsigned long ip);
 
 #endif /* _ASM_POWERPC_ASM_PROTOTYPES_H */