Merge branch 'master' into next

.gitignore

@@ -49,6 +49,7 @@ include/linux/compile.h
 include/linux/version.h
 include/linux/utsrelease.h
 include/linux/bounds.h
+include/generated
 
 # stgit generated dirs
 patches-*

CREDITS

@@ -495,6 +495,11 @@ S: Kopmansg 2
 S: 411 13  Goteborg
 S: Sweden
 
+N: Paul Bristow
+E: paul@paulbristow.net
+W: http://paulbristow.net/linux/idefloppy.html
+D: Maintainer of IDE/ATAPI floppy driver
+
 N: Dominik Brodowski
 E: linux@brodo.de
 W: http://www.brodo.de/
@@ -1407,8 +1412,8 @@ P: 1024D/77D4FC9B F5C5 1C20 1DFC DEC3 3107  54A4 2332 ADFC 77D4 FC9B
 D: National Language Support
 D: Linux Internationalization Project
 D: German Localization for Linux and GNU software
-S: Kriemhildring 12a
-S: 65795 Hattersheim am Main
+S: Auf der Fittel 18
+S: 53347 Alfter
 S: Germany
 
 N: Christoph Hellwig
@@ -2642,6 +2647,10 @@ S: C/ Mieses 20, 9-B
 S: Valladolid 47009
 S: Spain
 
+N: Gadi Oxman
+E: gadio@netvision.net.il
+D: Original author and maintainer of IDE/ATAPI floppy/tape drivers
+
 N: Greg Page
 E: gpage@sovereign.org
 D: IPX development and support
@@ -3571,6 +3580,12 @@ N: Dirk Verworner
 D: Co-author of German book ``Linux-Kernel-Programmierung''
 D: Co-founder of Berlin Linux User Group
 
+N: Riku Voipio
+E: riku.voipio@iki.fi
+D: Author of PCA9532 LED and Fintek f75375s hwmon driver
+D: Some random ARM board patches
+S: Finland
+
 N: Patrick Volkerding
 E: volkerdi@ftp.cdrom.com
 D: Produced the Slackware distribution, updated the SVGAlib

Documentation/00-INDEX

@@ -86,6 +86,8 @@ cachetlb.txt
 	- describes the cache/TLB flushing interfaces Linux uses.
 cdrom/
 	- directory with information on the CD-ROM drivers that Linux has.
+cgroups/
+	- cgroups features, including cpusets and memory controller.
 connector/
 	- docs on the netlink based userspace<->kernel space communication mod.
 console/
@@ -98,8 +100,6 @@ cpu-load.txt
 	- document describing how CPU load statistics are collected.
 cpuidle/
 	- info on CPU_IDLE, CPU idle state management subsystem.
-cpusets.txt
-	- documents the cpusets feature; assign CPUs and Mem to a set of tasks.
 cputopology.txt
 	- documentation on how CPU topology info is exported via sysfs.
 cris/

Documentation/ABI/testing/debugfs-kmemtrace

@@ -0,0 +1,71 @@
+What:		/sys/kernel/debug/kmemtrace/
+Date:		July 2008
+Contact:	Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
+Description:
+
+In kmemtrace-enabled kernels, the following files are created:
+
+/sys/kernel/debug/kmemtrace/
+	cpu<n>		(0400)	Per-CPU tracing data, see below. (binary)
+	total_overruns	(0400)	Total number of bytes which were dropped from
+				cpu<n> files because of full buffer condition,
+				non-binary. (text)
+	abi_version	(0400)	Kernel's kmemtrace ABI version. (text)
+
+Each per-CPU file should be read according to the relay interface. That is,
+the reader should set affinity to that specific CPU and, as currently done by
+the userspace application (though there are other methods), use poll() with
+an infinite timeout before every read(). Otherwise, erroneous data may be
+read. The binary data has the following _core_ format:
+
+	Event ID	(1 byte)	Unsigned integer, one of:
+		0 - represents an allocation (KMEMTRACE_EVENT_ALLOC)
+		1 - represents a freeing of previously allocated memory
+		    (KMEMTRACE_EVENT_FREE)
+	Type ID		(1 byte)	Unsigned integer, one of:
+		0 - this is a kmalloc() / kfree()
+		1 - this is a kmem_cache_alloc() / kmem_cache_free()
+		2 - this is a __get_free_pages() et al.
+	Event size	(2 bytes)	Unsigned integer representing the
+					size of this event. Used to extend
+					kmemtrace. Discard the bytes you
+					don't know about.
+	Sequence number	(4 bytes)	Signed integer used to reorder data
+					logged on SMP machines. Wraparound
+					must be taken into account, although
+					it is unlikely.
+	Caller address	(8 bytes)	Return address to the caller.
+	Pointer to mem	(8 bytes)	Pointer to target memory area. Can be
+					NULL, but not all such calls might be
+					recorded.
+
+In case of KMEMTRACE_EVENT_ALLOC events, the next fields follow:
+
+	Requested bytes	(8 bytes)	Total number of requested bytes,
+					unsigned, must not be zero.
+	Allocated bytes (8 bytes)	Total number of actually allocated
+					bytes, unsigned, must not be lower
+					than requested bytes.
+	Requested flags	(4 bytes)	GFP flags supplied by the caller.
+	Target CPU	(4 bytes)	Signed integer, valid for event id 1.
+					If equal to -1, target CPU is the same
+					as origin CPU, but the reverse might
+					not be true.
+
+The data is made available in the same endianness the machine has.
+
+Other event ids and type ids may be defined and added. Other fields may be
+added by increasing event size, but see below for details.
+Every modification to the ABI, including new id definitions, are followed
+by bumping the ABI version by one.
+
+Adding new data to the packet (features) is done at the end of the mandatory
+data:
+	Feature size	(2 byte)
+	Feature ID	(1 byte)
+	Feature data	(Feature size - 3 bytes)
+
+
+Users:
+	kmemtrace-user - git://repo.or.cz/kmemtrace-user.git
+

Documentation/ABI/testing/debugfs-pktcdvd

@@ -1,4 +1,4 @@
-What:           /debug/pktcdvd/pktcdvd[0-7]
+What:           /sys/kernel/debug/pktcdvd/pktcdvd[0-7]
 Date:           Oct. 2006
 KernelVersion:  2.6.20
 Contact:        Thomas Maier <balagi@justmail.de>
@@ -10,10 +10,10 @@ debugfs interface
 The pktcdvd module (packet writing driver) creates
 these files in debugfs:
 
-/debug/pktcdvd/pktcdvd[0-7]/
+/sys/kernel/debug/pktcdvd/pktcdvd[0-7]/
     info            (0444) Lots of driver statistics and infos.
 
 Example:
 -------
 
-cat /debug/pktcdvd/pktcdvd0/info
+cat /sys/kernel/debug/pktcdvd/pktcdvd0/info

Documentation/ABI/testing/sysfs-bus-pci

@@ -41,6 +41,49 @@ Description:
 		for the device and attempt to bind to it.  For example:
 		# echo "8086 10f5" > /sys/bus/pci/drivers/foo/new_id
 
+What:		/sys/bus/pci/drivers/.../remove_id
+Date:		February 2009
+Contact:	Chris Wright <chrisw@sous-sol.org>
+Description:
+		Writing a device ID to this file will remove an ID
+		that was dynamically added via the new_id sysfs entry.
+		The format for the device ID is:
+		VVVV DDDD SVVV SDDD CCCC MMMM.	That is Vendor ID, Device
+		ID, Subsystem Vendor ID, Subsystem Device ID, Class,
+		and Class Mask.  The Vendor ID and Device ID fields are
+		required, the rest are optional.  After successfully
+		removing an ID, the driver will no longer support the
+		device.  This is useful to ensure auto probing won't
+		match the driver to the device.  For example:
+		# echo "8086 10f5" > /sys/bus/pci/drivers/foo/remove_id
+
+What:		/sys/bus/pci/rescan
+Date:		January 2009
+Contact:	Linux PCI developers <linux-pci@vger.kernel.org>
+Description:
+		Writing a non-zero value to this attribute will
+		force a rescan of all PCI buses in the system, and
+		re-discover previously removed devices.
+		Depends on CONFIG_HOTPLUG.
+
+What:		/sys/bus/pci/devices/.../remove
+Date:		January 2009
+Contact:	Linux PCI developers <linux-pci@vger.kernel.org>
+Description:
+		Writing a non-zero value to this attribute will
+		hot-remove the PCI device and any of its children.
+		Depends on CONFIG_HOTPLUG.
+
+What:		/sys/bus/pci/devices/.../rescan
+Date:		January 2009
+Contact:	Linux PCI developers <linux-pci@vger.kernel.org>
+Description:
+		Writing a non-zero value to this attribute will
+		force a rescan of the device's parent bus and all
+		child buses, and re-discover devices removed earlier
+		from this part of the device tree.
+		Depends on CONFIG_HOTPLUG.
+
 What:		/sys/bus/pci/devices/.../vpd
 Date:		February 2008
 Contact:	Ben Hutchings <bhutchings@solarflare.com>
@@ -52,3 +95,30 @@ Description:
 		that some devices may have malformatted data.  If the
 		underlying VPD has a writable section then the
 		corresponding section of this file will be writable.
+
+What:		/sys/bus/pci/devices/.../virtfnN
+Date:		March 2009
+Contact:	Yu Zhao <yu.zhao@intel.com>
+Description:
+		This symbolic link appears when hardware supports the SR-IOV
+		capability and the Physical Function driver has enabled it.
+		The symbolic link points to the PCI device sysfs entry of the
+		Virtual Function whose index is N (0...MaxVFs-1).
+
+What:		/sys/bus/pci/devices/.../dep_link
+Date:		March 2009
+Contact:	Yu Zhao <yu.zhao@intel.com>
+Description:
+		This symbolic link appears when hardware supports the SR-IOV
+		capability and the Physical Function driver has enabled it,
+		and this device has vendor specific dependencies with others.
+		The symbolic link points to the PCI device sysfs entry of
+		Physical Function this device depends on.
+
+What:		/sys/bus/pci/devices/.../physfn
+Date:		March 2009
+Contact:	Yu Zhao <yu.zhao@intel.com>
+Description:
+		This symbolic link appears when a device is a Virtual Function.
+		The symbolic link points to the PCI device sysfs entry of the
+		Physical Function this device associates with.

Documentation/ABI/testing/sysfs-class-regulator

@@ -4,8 +4,8 @@ KernelVersion:	2.6.26
 Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
 Description:
 		Some regulator directories will contain a field called
-		state. This reports the regulator enable status, for
-		regulators which can report that value.
+		state. This reports the regulator enable control, for
+		regulators which can report that input value.
 
 		This will be one of the following strings:
 
@@ -14,16 +14,54 @@ Description:
 		'unknown'
 
 		'enabled' means the regulator output is ON and is supplying
-		power to the system.
+		power to the system (assuming no error prevents it).
 
 		'disabled' means the regulator output is OFF and is not
-		supplying power to the system..
+		supplying power to the system (unless some non-Linux
+		control has enabled it).
 
 		'unknown' means software cannot determine the state, or
 		the reported state is invalid.
 
 		NOTE: this field can be used in conjunction with microvolts
-		and microamps to determine regulator output levels.
+		or microamps to determine configured regulator output levels.
+
+
+What:		/sys/class/regulator/.../status
+Description:
+		Some regulator directories will contain a field called
+		"status". This reports the current regulator status, for
+		regulators which can report that output value.
+
+		This will be one of the following strings:
+
+			off
+			on
+			error
+			fast
+			normal
+			idle
+			standby
+
+		"off" means the regulator is not supplying power to the
+		system.
+
+		"on" means the regulator is supplying power to the system,
+		and the regulator can't report a detailed operation mode.
+
+		"error" indicates an out-of-regulation status such as being
+		disabled due to thermal shutdown, or voltage being unstable
+		because of problems with the input power supply.
+
+		"fast", "normal", "idle", and "standby" are all detailed
+		regulator operation modes (described elsewhere).  They
+		imply "on", but provide more detail.
+
+		Note that regulator status is a function of many inputs,
+		not limited to control inputs from Linux.  For example,
+		the actual load presented may trigger "error" status; or
+		a regulator may be enabled by another user, even though
+		Linux did not enable it.
 
 
 What:		/sys/class/regulator/.../type
@@ -58,7 +96,7 @@ Description:
 		Some regulator directories will contain a field called
 		microvolts. This holds the regulator output voltage setting
 		measured in microvolts (i.e. E-6 Volts), for regulators
-		which can report that voltage.
+		which can report the control input for voltage.
 
 		NOTE: This value should not be used to determine the regulator
 		output voltage level as this value is the same regardless of
@@ -73,7 +111,7 @@ Description:
 		Some regulator directories will contain a field called
 		microamps. This holds the regulator output current limit
 		setting measured in microamps (i.e. E-6 Amps), for regulators
-		which can report that current.
+		which can report the control input for a current limit.
 
 		NOTE: This value should not be used to determine the regulator
 		output current level as this value is the same regardless of
@@ -87,7 +125,7 @@ Contact:	Liam Girdwood <lrg@slimlogic.co.uk>
 Description:
 		Some regulator directories will contain a field called
 		opmode. This holds the current regulator operating mode,
-		for regulators which can report it.
+		for regulators which can report that control input value.
 
 		The opmode value can be one of the following strings:
 
@@ -101,7 +139,8 @@ Description:
 
 		NOTE: This value should not be used to determine the regulator
 		output operating mode as this value is the same regardless of
-		whether the regulator is enabled or disabled.
+		whether the regulator is enabled or disabled.  A "status"
+		attribute may be available to determine the actual mode.
 
 
 What:		/sys/class/regulator/.../min_microvolts

Documentation/ABI/testing/sysfs-firmware-acpi

@@ -69,9 +69,13 @@ Description:
 		gpe1F:	     0	invalid
 		gpe_all:    1192
 		sci:	1194
+		sci_not:     0	
 
-		sci - The total number of times the ACPI SCI
-		has claimed an interrupt.
+		sci - The number of times the ACPI SCI
+		has been called and claimed an interrupt.
+
+		sci_not - The number of times the ACPI SCI
+		has been called and NOT claimed an interrupt.
 
 		gpe_all - count of SCI caused by GPEs.