Add start_duty threshold to odroid fan driver #53
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
|
Ah I forgot to mention that my fan made weird noises when the current was too low to let it turn. This was the reason why I started looking into this. My current setup is: Works like Lionel Messi. |
mdrjr
added a commit
that referenced
this pull request
Jun 30, 2014
Add start_duty threshold to odroid fan driver
mdrjr
pushed a commit
that referenced
this pull request
Aug 5, 2014
…ike page) commit e0d4075 upstream. Unfortunately, I never committed the fix to a nasty oops which can occur as a result of that commit: ------------[ cut here ]------------ kernel BUG at /home/olof/work/batch/include/linux/mm.h:414! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 490 Comm: killall5 Not tainted 3.11.0-rc3-00288-gabe0308 #53 task: e90acac0 ti: e9be8000 task.ti: e9be8000 PC is at special_mapping_fault+0xa4/0xc4 LR is at __do_fault+0x68/0x48c This doesn't show up unless you do quite a bit of testing; a simple boot test does not do this, so all my nightly tests were passing fine. The reason for this is that install_special_mapping() expects the page array to stick around, and as this was only inserting one page which was stored on the kernel stack, that's why this was blowing up. Reported-by: Olof Johansson <olof@lixom.net> Tested-by: Olof Johansson <olof@lixom.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
Is this merged to 3.4.y for the xu ... ? |
|
AFIAK this is only for odroid-3.8.y you can port it to odroidxu-3.4.y and send a PR :) |
Dmole
pushed a commit
to Dmole/linux
that referenced
this pull request
Apr 21, 2017
commit 6f6266a upstream. Reserving a runtime region results in splitting the EFI memory descriptors for the runtime region. This results in runtime region descriptors with bogus memory mappings, leading to interesting crashes like the following during a kexec: general protection fault: 0000 [hardkernel#1] SMP Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0-rc1 hardkernel#53 Hardware name: Wiwynn Leopard-Orv2/Leopard-DDR BW, BIOS LBM05 09/30/2016 RIP: 0010:virt_efi_set_variable() ... Call Trace: efi_delete_dummy_variable() efi_enter_virtual_mode() start_kernel() ? set_init_arg() x86_64_start_reservations() x86_64_start_kernel() start_cpu() ... Kernel panic - not syncing: Fatal exception Runtime regions will not be freed and do not need to be reserved, so skip the memmap modification in this case. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Dave Young <dyoung@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Jones <pjones@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 8e80632 ("efi/esrt: Use efi_mem_reserve() and avoid a kmalloc()") Link: http://lkml.kernel.org/r/20170412152719.9779-2-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mdrjr
pushed a commit
that referenced
this pull request
Feb 13, 2019
[ Upstream commit 6fa19f5 ] syzbot was able to catch a bug in rds [1] The issue here is that the socket might be found in a hash table but that its refcount has already be set to 0 by another cpu. We need to use refcount_inc_not_zero() to be safe here. [1] refcount_t: increment on 0; use-after-free. WARNING: CPU: 1 PID: 23129 at lib/refcount.c:153 refcount_inc_checked lib/refcount.c:153 [inline] WARNING: CPU: 1 PID: 23129 at lib/refcount.c:153 refcount_inc_checked+0x61/0x70 lib/refcount.c:151 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 23129 Comm: syz-executor3 Not tainted 5.0.0-rc4+ #53 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1db/0x2d0 lib/dump_stack.c:113 panic+0x2cb/0x65c kernel/panic.c:214 __warn.cold+0x20/0x48 kernel/panic.c:571 report_bug+0x263/0x2b0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:178 [inline] fixup_bug arch/x86/kernel/traps.c:173 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:271 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:290 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:973 RIP: 0010:refcount_inc_checked lib/refcount.c:153 [inline] RIP: 0010:refcount_inc_checked+0x61/0x70 lib/refcount.c:151 Code: 1d 51 63 c8 06 31 ff 89 de e8 eb 1b f2 fd 84 db 75 dd e8 a2 1a f2 fd 48 c7 c7 60 9f 81 88 c6 05 31 63 c8 06 01 e8 af 65 bb fd <0f> 0b eb c1 90 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 54 49 RSP: 0018:ffff8880a0cbf1e8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffc90006113000 RDX: 000000000001047d RSI: ffffffff81685776 RDI: 0000000000000005 RBP: ffff8880a0cbf1f8 R08: ffff888097c9e100 R09: ffffed1015ce5021 R10: ffffed1015ce5020 R11: ffff8880ae728107 R12: ffff8880723c20c0 R13: ffff8880723c24b0 R14: dffffc0000000000 R15: ffffed1014197e64 sock_hold include/net/sock.h:647 [inline] rds_sock_addref+0x19/0x20 net/rds/af_rds.c:675 rds_find_bound+0x97c/0x1080 net/rds/bind.c:82 rds_recv_incoming+0x3be/0x1430 net/rds/recv.c:362 rds_loop_xmit+0xf3/0x2a0 net/rds/loop.c:96 rds_send_xmit+0x1355/0x2a10 net/rds/send.c:355 rds_sendmsg+0x323c/0x44e0 net/rds/send.c:1368 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg+0xdd/0x130 net/socket.c:631 __sys_sendto+0x387/0x5f0 net/socket.c:1788 __do_sys_sendto net/socket.c:1800 [inline] __se_sys_sendto net/socket.c:1796 [inline] __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1796 do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458089 Code: 6d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fc266df8c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 0000000000458089 RDX: 0000000000000000 RSI: 00000000204b3fff RDI: 0000000000000005 RBP: 000000000073bf00 R08: 00000000202b4000 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fc266df96d4 R13: 00000000004c56e4 R14: 00000000004d94a8 R15: 00000000ffffffff Fixes: cc4dfb7 ("rds: fix two RCU related problems") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Sowmini Varadhan <sowmini.varadhan@oracle.com> Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com> Cc: rds-devel@oss.oracle.com Cc: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mihailescu2m
pushed a commit
to mihailescu2m/linux
that referenced
this pull request
Feb 14, 2019
syzbot was able to catch a bug in rds [1] The issue here is that the socket might be found in a hash table but that its refcount has already be set to 0 by another cpu. We need to use refcount_inc_not_zero() to be safe here. [1] refcount_t: increment on 0; use-after-free. WARNING: CPU: 1 PID: 23129 at lib/refcount.c:153 refcount_inc_checked lib/refcount.c:153 [inline] WARNING: CPU: 1 PID: 23129 at lib/refcount.c:153 refcount_inc_checked+0x61/0x70 lib/refcount.c:151 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 23129 Comm: syz-executor3 Not tainted 5.0.0-rc4+ hardkernel#53 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1db/0x2d0 lib/dump_stack.c:113 panic+0x2cb/0x65c kernel/panic.c:214 __warn.cold+0x20/0x48 kernel/panic.c:571 report_bug+0x263/0x2b0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:178 [inline] fixup_bug arch/x86/kernel/traps.c:173 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:271 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:290 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:973 RIP: 0010:refcount_inc_checked lib/refcount.c:153 [inline] RIP: 0010:refcount_inc_checked+0x61/0x70 lib/refcount.c:151 Code: 1d 51 63 c8 06 31 ff 89 de e8 eb 1b f2 fd 84 db 75 dd e8 a2 1a f2 fd 48 c7 c7 60 9f 81 88 c6 05 31 63 c8 06 01 e8 af 65 bb fd <0f> 0b eb c1 90 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 54 49 RSP: 0018:ffff8880a0cbf1e8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffc90006113000 RDX: 000000000001047d RSI: ffffffff81685776 RDI: 0000000000000005 RBP: ffff8880a0cbf1f8 R08: ffff888097c9e100 R09: ffffed1015ce5021 R10: ffffed1015ce5020 R11: ffff8880ae728107 R12: ffff8880723c20c0 R13: ffff8880723c24b0 R14: dffffc0000000000 R15: ffffed1014197e64 sock_hold include/net/sock.h:647 [inline] rds_sock_addref+0x19/0x20 net/rds/af_rds.c:675 rds_find_bound+0x97c/0x1080 net/rds/bind.c:82 rds_recv_incoming+0x3be/0x1430 net/rds/recv.c:362 rds_loop_xmit+0xf3/0x2a0 net/rds/loop.c:96 rds_send_xmit+0x1355/0x2a10 net/rds/send.c:355 rds_sendmsg+0x323c/0x44e0 net/rds/send.c:1368 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg+0xdd/0x130 net/socket.c:631 __sys_sendto+0x387/0x5f0 net/socket.c:1788 __do_sys_sendto net/socket.c:1800 [inline] __se_sys_sendto net/socket.c:1796 [inline] __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1796 do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458089 Code: 6d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fc266df8c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 0000000000458089 RDX: 0000000000000000 RSI: 00000000204b3fff RDI: 0000000000000005 RBP: 000000000073bf00 R08: 00000000202b4000 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fc266df96d4 R13: 00000000004c56e4 R14: 00000000004d94a8 R15: 00000000ffffffff Fixes: cc4dfb7 ("rds: fix two RCU related problems") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Sowmini Varadhan <sowmini.varadhan@oracle.com> Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com> Cc: rds-devel@oss.oracle.com Cc: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
mihailescu2m
pushed a commit
to mihailescu2m/linux
that referenced
this pull request
Feb 14, 2019
KASAN detects a use-after-free when vop devices are removed. This problem was introduced by commit 0063e8b ("virtio_vop: don't kfree device on register failure"). That patch moved the freeing of the struct _vop_vdev to the release function, but failed to ensure that vop holds a reference to the device when it doesn't want it to go away. A kfree() was replaced with a put_device() in the unregistration path, but the last reference to the device is already dropped in unregister_virtio_device() so the struct is freed before vop is done with it. Fix it by holding a reference until cleanup is done. This is similar to the fix in virtio_pci in commit 2989be0 ("virtio_pci: fix use after free on release"). ================================================================== BUG: KASAN: use-after-free in vop_scan_devices+0xc6c/0xe50 [vop] Read of size 8 at addr ffff88800da18580 by task kworker/0:1/12 CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.0.0-rc4+ hardkernel#53 Workqueue: events vop_hotplug_devices [vop] Call Trace: dump_stack+0x74/0xbb print_address_description+0x5d/0x2b0 ? vop_scan_devices+0xc6c/0xe50 [vop] kasan_report+0x152/0x1aa ? vop_scan_devices+0xc6c/0xe50 [vop] ? vop_scan_devices+0xc6c/0xe50 [vop] vop_scan_devices+0xc6c/0xe50 [vop] ? vop_loopback_free_irq+0x160/0x160 [vop_loopback] process_one_work+0x7c0/0x14b0 ? pwq_dec_nr_in_flight+0x2d0/0x2d0 ? do_raw_spin_lock+0x120/0x280 worker_thread+0x8f/0xbf0 ? __kthread_parkme+0x78/0xf0 ? process_one_work+0x14b0/0x14b0 kthread+0x2ae/0x3a0 ? kthread_park+0x120/0x120 ret_from_fork+0x3a/0x50 Allocated by task 12: kmem_cache_alloc_trace+0x13a/0x2a0 vop_scan_devices+0x473/0xe50 [vop] process_one_work+0x7c0/0x14b0 worker_thread+0x8f/0xbf0 kthread+0x2ae/0x3a0 ret_from_fork+0x3a/0x50 Freed by task 12: kfree+0x104/0x310 device_release+0x73/0x1d0 kobject_put+0x14f/0x420 unregister_virtio_device+0x32/0x50 vop_scan_devices+0x19d/0xe50 [vop] process_one_work+0x7c0/0x14b0 worker_thread+0x8f/0xbf0 kthread+0x2ae/0x3a0 ret_from_fork+0x3a/0x50 The buggy address belongs to the object at ffff88800da18008 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 1400 bytes inside of 2048-byte region [ffff88800da18008, ffff88800da18808) The buggy address belongs to the page: page:ffffea0000368600 count:1 mapcount:0 mapping:ffff88801440dbc0 index:0x0 compound_mapcount: 0 flags: 0x4000000000010200(slab|head) raw: 4000000000010200 ffffea0000378608 ffffea000037a008 ffff88801440dbc0 raw: 0000000000000000 00000000000d000d 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88800da18480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88800da18500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff88800da18580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88800da18600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88800da18680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Fixes: 0063e8b ("virtio_vop: don't kfree device on register failure") Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mdrjr
pushed a commit
that referenced
this pull request
Feb 21, 2019
[ Upstream commit 6fa19f5 ] syzbot was able to catch a bug in rds [1] The issue here is that the socket might be found in a hash table but that its refcount has already be set to 0 by another cpu. We need to use refcount_inc_not_zero() to be safe here. [1] refcount_t: increment on 0; use-after-free. WARNING: CPU: 1 PID: 23129 at lib/refcount.c:153 refcount_inc_checked lib/refcount.c:153 [inline] WARNING: CPU: 1 PID: 23129 at lib/refcount.c:153 refcount_inc_checked+0x61/0x70 lib/refcount.c:151 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 23129 Comm: syz-executor3 Not tainted 5.0.0-rc4+ #53 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1db/0x2d0 lib/dump_stack.c:113 panic+0x2cb/0x65c kernel/panic.c:214 __warn.cold+0x20/0x48 kernel/panic.c:571 report_bug+0x263/0x2b0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:178 [inline] fixup_bug arch/x86/kernel/traps.c:173 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:271 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:290 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:973 RIP: 0010:refcount_inc_checked lib/refcount.c:153 [inline] RIP: 0010:refcount_inc_checked+0x61/0x70 lib/refcount.c:151 Code: 1d 51 63 c8 06 31 ff 89 de e8 eb 1b f2 fd 84 db 75 dd e8 a2 1a f2 fd 48 c7 c7 60 9f 81 88 c6 05 31 63 c8 06 01 e8 af 65 bb fd <0f> 0b eb c1 90 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 54 49 RSP: 0018:ffff8880a0cbf1e8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffc90006113000 RDX: 000000000001047d RSI: ffffffff81685776 RDI: 0000000000000005 RBP: ffff8880a0cbf1f8 R08: ffff888097c9e100 R09: ffffed1015ce5021 R10: ffffed1015ce5020 R11: ffff8880ae728107 R12: ffff8880723c20c0 R13: ffff8880723c24b0 R14: dffffc0000000000 R15: ffffed1014197e64 sock_hold include/net/sock.h:647 [inline] rds_sock_addref+0x19/0x20 net/rds/af_rds.c:675 rds_find_bound+0x97c/0x1080 net/rds/bind.c:82 rds_recv_incoming+0x3be/0x1430 net/rds/recv.c:362 rds_loop_xmit+0xf3/0x2a0 net/rds/loop.c:96 rds_send_xmit+0x1355/0x2a10 net/rds/send.c:355 rds_sendmsg+0x323c/0x44e0 net/rds/send.c:1368 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg+0xdd/0x130 net/socket.c:631 __sys_sendto+0x387/0x5f0 net/socket.c:1788 __do_sys_sendto net/socket.c:1800 [inline] __se_sys_sendto net/socket.c:1796 [inline] __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1796 do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458089 Code: 6d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fc266df8c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 0000000000458089 RDX: 0000000000000000 RSI: 00000000204b3fff RDI: 0000000000000005 RBP: 000000000073bf00 R08: 00000000202b4000 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fc266df96d4 R13: 00000000004c56e4 R14: 00000000004d94a8 R15: 00000000ffffffff Fixes: cc4dfb7 ("rds: fix two RCU related problems") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Sowmini Varadhan <sowmini.varadhan@oracle.com> Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com> Cc: rds-devel@oss.oracle.com Cc: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hardkernel
pushed a commit
that referenced
this pull request
Apr 20, 2020
commit 351cbf6 upstream. Zygo reported the following lockdep splat while testing the balance patches ====================================================== WARNING: possible circular locking dependency detected 5.6.0-c6f0579d496a+ #53 Not tainted ------------------------------------------------------ kswapd0/1133 is trying to acquire lock: ffff888092f622c0 (&delayed_node->mutex){+.+.}, at: __btrfs_release_delayed_node+0x7c/0x5b0 but task is already holding lock: ffffffff8fc5f860 (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x5/0x30 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}: fs_reclaim_acquire.part.91+0x29/0x30 fs_reclaim_acquire+0x19/0x20 kmem_cache_alloc_trace+0x32/0x740 add_block_entry+0x45/0x260 btrfs_ref_tree_mod+0x6e2/0x8b0 btrfs_alloc_tree_block+0x789/0x880 alloc_tree_block_no_bg_flush+0xc6/0xf0 __btrfs_cow_block+0x270/0x940 btrfs_cow_block+0x1ba/0x3a0 btrfs_search_slot+0x999/0x1030 btrfs_insert_empty_items+0x81/0xe0 btrfs_insert_delayed_items+0x128/0x7d0 __btrfs_run_delayed_items+0xf4/0x2a0 btrfs_run_delayed_items+0x13/0x20 btrfs_commit_transaction+0x5cc/0x1390 insert_balance_item.isra.39+0x6b2/0x6e0 btrfs_balance+0x72d/0x18d0 btrfs_ioctl_balance+0x3de/0x4c0 btrfs_ioctl+0x30ab/0x44a0 ksys_ioctl+0xa1/0xe0 __x64_sys_ioctl+0x43/0x50 do_syscall_64+0x77/0x2c0 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (&delayed_node->mutex){+.+.}: __lock_acquire+0x197e/0x2550 lock_acquire+0x103/0x220 __mutex_lock+0x13d/0xce0 mutex_lock_nested+0x1b/0x20 __btrfs_release_delayed_node+0x7c/0x5b0 btrfs_remove_delayed_node+0x49/0x50 btrfs_evict_inode+0x6fc/0x900 evict+0x19a/0x2c0 dispose_list+0xa0/0xe0 prune_icache_sb+0xbd/0xf0 super_cache_scan+0x1b5/0x250 do_shrink_slab+0x1f6/0x530 shrink_slab+0x32e/0x410 shrink_node+0x2a5/0xba0 balance_pgdat+0x4bd/0x8a0 kswapd+0x35a/0x800 kthread+0x1e9/0x210 ret_from_fork+0x3a/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(&delayed_node->mutex); lock(fs_reclaim); lock(&delayed_node->mutex); *** DEADLOCK *** 3 locks held by kswapd0/1133: #0: ffffffff8fc5f860 (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x5/0x30 #1: ffffffff8fc380d8 (shrinker_rwsem){++++}, at: shrink_slab+0x1e8/0x410 #2: ffff8881e0e6c0e8 (&type->s_umount_key#42){++++}, at: trylock_super+0x1b/0x70 stack backtrace: CPU: 2 PID: 1133 Comm: kswapd0 Not tainted 5.6.0-c6f0579d496a+ #53 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 Call Trace: dump_stack+0xc1/0x11a print_circular_bug.isra.38.cold.57+0x145/0x14a check_noncircular+0x2a9/0x2f0 ? print_circular_bug.isra.38+0x130/0x130 ? stack_trace_consume_entry+0x90/0x90 ? save_trace+0x3cc/0x420 __lock_acquire+0x197e/0x2550 ? btrfs_inode_clear_file_extent_range+0x9b/0xb0 ? register_lock_class+0x960/0x960 lock_acquire+0x103/0x220 ? __btrfs_release_delayed_node+0x7c/0x5b0 __mutex_lock+0x13d/0xce0 ? __btrfs_release_delayed_node+0x7c/0x5b0 ? __asan_loadN+0xf/0x20 ? pvclock_clocksource_read+0xeb/0x190 ? __btrfs_release_delayed_node+0x7c/0x5b0 ? mutex_lock_io_nested+0xc20/0xc20 ? __kasan_check_read+0x11/0x20 ? check_chain_key+0x1e6/0x2e0 mutex_lock_nested+0x1b/0x20 ? mutex_lock_nested+0x1b/0x20 __btrfs_release_delayed_node+0x7c/0x5b0 btrfs_remove_delayed_node+0x49/0x50 btrfs_evict_inode+0x6fc/0x900 ? btrfs_setattr+0x840/0x840 ? do_raw_spin_unlock+0xa8/0x140 evict+0x19a/0x2c0 dispose_list+0xa0/0xe0 prune_icache_sb+0xbd/0xf0 ? invalidate_inodes+0x310/0x310 super_cache_scan+0x1b5/0x250 do_shrink_slab+0x1f6/0x530 shrink_slab+0x32e/0x410 ? do_shrink_slab+0x530/0x530 ? do_shrink_slab+0x530/0x530 ? __kasan_check_read+0x11/0x20 ? mem_cgroup_protected+0x13d/0x260 shrink_node+0x2a5/0xba0 balance_pgdat+0x4bd/0x8a0 ? mem_cgroup_shrink_node+0x490/0x490 ? _raw_spin_unlock_irq+0x27/0x40 ? finish_task_switch+0xce/0x390 ? rcu_read_lock_bh_held+0xb0/0xb0 kswapd+0x35a/0x800 ? _raw_spin_unlock_irqrestore+0x4c/0x60 ? balance_pgdat+0x8a0/0x8a0 ? finish_wait+0x110/0x110 ? __kasan_check_read+0x11/0x20 ? __kthread_parkme+0xc6/0xe0 ? balance_pgdat+0x8a0/0x8a0 kthread+0x1e9/0x210 ? kthread_create_worker_on_cpu+0xc0/0xc0 ret_from_fork+0x3a/0x50 This is because we hold that delayed node's mutex while doing tree operations. Fix this by just wrapping the searches in nofs. CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mdrjr
pushed a commit
that referenced
this pull request
May 19, 2020
[ Upstream commit 351cbf6 ] Zygo reported the following lockdep splat while testing the balance patches ====================================================== WARNING: possible circular locking dependency detected 5.6.0-c6f0579d496a+ #53 Not tainted ------------------------------------------------------ kswapd0/1133 is trying to acquire lock: ffff888092f622c0 (&delayed_node->mutex){+.+.}, at: __btrfs_release_delayed_node+0x7c/0x5b0 but task is already holding lock: ffffffff8fc5f860 (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x5/0x30 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}: fs_reclaim_acquire.part.91+0x29/0x30 fs_reclaim_acquire+0x19/0x20 kmem_cache_alloc_trace+0x32/0x740 add_block_entry+0x45/0x260 btrfs_ref_tree_mod+0x6e2/0x8b0 btrfs_alloc_tree_block+0x789/0x880 alloc_tree_block_no_bg_flush+0xc6/0xf0 __btrfs_cow_block+0x270/0x940 btrfs_cow_block+0x1ba/0x3a0 btrfs_search_slot+0x999/0x1030 btrfs_insert_empty_items+0x81/0xe0 btrfs_insert_delayed_items+0x128/0x7d0 __btrfs_run_delayed_items+0xf4/0x2a0 btrfs_run_delayed_items+0x13/0x20 btrfs_commit_transaction+0x5cc/0x1390 insert_balance_item.isra.39+0x6b2/0x6e0 btrfs_balance+0x72d/0x18d0 btrfs_ioctl_balance+0x3de/0x4c0 btrfs_ioctl+0x30ab/0x44a0 ksys_ioctl+0xa1/0xe0 __x64_sys_ioctl+0x43/0x50 do_syscall_64+0x77/0x2c0 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (&delayed_node->mutex){+.+.}: __lock_acquire+0x197e/0x2550 lock_acquire+0x103/0x220 __mutex_lock+0x13d/0xce0 mutex_lock_nested+0x1b/0x20 __btrfs_release_delayed_node+0x7c/0x5b0 btrfs_remove_delayed_node+0x49/0x50 btrfs_evict_inode+0x6fc/0x900 evict+0x19a/0x2c0 dispose_list+0xa0/0xe0 prune_icache_sb+0xbd/0xf0 super_cache_scan+0x1b5/0x250 do_shrink_slab+0x1f6/0x530 shrink_slab+0x32e/0x410 shrink_node+0x2a5/0xba0 balance_pgdat+0x4bd/0x8a0 kswapd+0x35a/0x800 kthread+0x1e9/0x210 ret_from_fork+0x3a/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(&delayed_node->mutex); lock(fs_reclaim); lock(&delayed_node->mutex); *** DEADLOCK *** 3 locks held by kswapd0/1133: #0: ffffffff8fc5f860 (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x5/0x30 #1: ffffffff8fc380d8 (shrinker_rwsem){++++}, at: shrink_slab+0x1e8/0x410 #2: ffff8881e0e6c0e8 (&type->s_umount_key#42){++++}, at: trylock_super+0x1b/0x70 stack backtrace: CPU: 2 PID: 1133 Comm: kswapd0 Not tainted 5.6.0-c6f0579d496a+ #53 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 Call Trace: dump_stack+0xc1/0x11a print_circular_bug.isra.38.cold.57+0x145/0x14a check_noncircular+0x2a9/0x2f0 ? print_circular_bug.isra.38+0x130/0x130 ? stack_trace_consume_entry+0x90/0x90 ? save_trace+0x3cc/0x420 __lock_acquire+0x197e/0x2550 ? btrfs_inode_clear_file_extent_range+0x9b/0xb0 ? register_lock_class+0x960/0x960 lock_acquire+0x103/0x220 ? __btrfs_release_delayed_node+0x7c/0x5b0 __mutex_lock+0x13d/0xce0 ? __btrfs_release_delayed_node+0x7c/0x5b0 ? __asan_loadN+0xf/0x20 ? pvclock_clocksource_read+0xeb/0x190 ? __btrfs_release_delayed_node+0x7c/0x5b0 ? mutex_lock_io_nested+0xc20/0xc20 ? __kasan_check_read+0x11/0x20 ? check_chain_key+0x1e6/0x2e0 mutex_lock_nested+0x1b/0x20 ? mutex_lock_nested+0x1b/0x20 __btrfs_release_delayed_node+0x7c/0x5b0 btrfs_remove_delayed_node+0x49/0x50 btrfs_evict_inode+0x6fc/0x900 ? btrfs_setattr+0x840/0x840 ? do_raw_spin_unlock+0xa8/0x140 evict+0x19a/0x2c0 dispose_list+0xa0/0xe0 prune_icache_sb+0xbd/0xf0 ? invalidate_inodes+0x310/0x310 super_cache_scan+0x1b5/0x250 do_shrink_slab+0x1f6/0x530 shrink_slab+0x32e/0x410 ? do_shrink_slab+0x530/0x530 ? do_shrink_slab+0x530/0x530 ? __kasan_check_read+0x11/0x20 ? mem_cgroup_protected+0x13d/0x260 shrink_node+0x2a5/0xba0 balance_pgdat+0x4bd/0x8a0 ? mem_cgroup_shrink_node+0x490/0x490 ? _raw_spin_unlock_irq+0x27/0x40 ? finish_task_switch+0xce/0x390 ? rcu_read_lock_bh_held+0xb0/0xb0 kswapd+0x35a/0x800 ? _raw_spin_unlock_irqrestore+0x4c/0x60 ? balance_pgdat+0x8a0/0x8a0 ? finish_wait+0x110/0x110 ? __kasan_check_read+0x11/0x20 ? __kthread_parkme+0xc6/0xe0 ? balance_pgdat+0x8a0/0x8a0 kthread+0x1e9/0x210 ? kthread_create_worker_on_cpu+0xc0/0xc0 ret_from_fork+0x3a/0x50 This is because we hold that delayed node's mutex while doing tree operations. Fix this by just wrapping the searches in nofs. CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
mdrjr
pushed a commit
that referenced
this pull request
Aug 17, 2021
[ Upstream commit 05cf8ff ] The to_ti_syscon_reset_data macro currently only works if the parameter passed into it is called 'rcdev'. Fixes a checkpatch --strict issue: CHECK: Macro argument reuse 'rcdev' - possible side-effects? #53: FILE: drivers/reset/reset-ti-syscon.c:53: +#define to_ti_syscon_reset_data(rcdev) \ + container_of(rcdev, struct ti_syscon_reset_data, rcdev) Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
paralin
pushed a commit
to paralin/linux
that referenced
this pull request
Mar 11, 2022
[ Upstream commit c0bf3d8 ] We encountered a crash in smc_setsockopt() and it is caused by accessing smc->clcsock after clcsock was released. BUG: kernel NULL pointer dereference, address: 0000000000000020 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [hardkernel#1] PREEMPT SMP PTI CPU: 1 PID: 50309 Comm: nginx Kdump: loaded Tainted: G E 5.16.0-rc4+ hardkernel#53 RIP: 0010:smc_setsockopt+0x59/0x280 [smc] Call Trace: <TASK> __sys_setsockopt+0xfc/0x190 __x64_sys_setsockopt+0x20/0x30 do_syscall_64+0x34/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f16ba83918e </TASK> This patch tries to fix it by holding clcsock_release_lock and checking whether clcsock has already been released before access. In case that a crash of the same reason happens in smc_getsockopt() or smc_switch_to_fallback(), this patch also checkes smc->clcsock in them too. And the caller of smc_switch_to_fallback() will identify whether fallback succeeds according to the return value. Fixes: fd57770 ("net/smc: wait for pending work before clcsock release_sock") Link: https://lore.kernel.org/lkml/5dd7ffd1-28e2-24cc-9442-1defec27375e@linux.ibm.com/T/ Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
paralin
pushed a commit
to paralin/linux
that referenced
this pull request
Mar 11, 2022
[ 9.030792] ------------[ cut here ]------------ [ 9.030794] Unbalanced IRQ 14 wake disable [ 9.030802] WARNING: CPU: 3 PID: 1234 at kernel/irq/manage.c:901 irq_set_irq_wake+0xf4/0x158 [ 9.030815] Modules linked in: rfkill dm_multipath dm_mod dax snd_soc_hdmi_codec dw_hdmi_i2s_audio sg uas meson_vdec(C) v4l2_mem2mem videobuf2_dma_contig videobuf2_v4l2 videobuf2_memops rtc_pcf8563 panfrost videobuf2_common gpu_sched meson_dw_hdmi snd_soc_meson_g12a_tohdmitx videodev meson_rng ir_nec_decoder snd_soc_meson_axg_sound_card snd_soc_meson_g12a_toacodec snd_soc_meson_card_utils dw_hdmi mc meson_drm rng_core snd_soc_meson_codec_glue meson_ir snd_soc_meson_axg_spdifout snd_soc_meson_axg_tdmout axg_audio meson_canvas snd_soc_meson_axg_frddr sclk_div snd_soc_meson_axg_toddr clk_phase reset_meson_audio_arb snd_soc_meson_axg_tdmin snd_soc_meson_axg_fifo snd_soc_meson_t9015 meson_gxbb_wdt snd_soc_meson_axg_tdm_interface snd_soc_meson_axg_tdm_formatter snd_soc_simple_amplifier snd_soc_spdif_tx pwm_fan sch_fq_codel fuse ip_tables x_tables [ 9.030902] CPU: 3 PID: 1234 Comm: NetworkManager Tainted: G C 5.14.9+ hardkernel#53 [ 9.030906] Hardware name: Hardkernel ODROID-N2 (DT) [ 9.030909] pstate: 400000c5 (nZcv daIF -PAN -UAO -TCO BTYPE=--) [ 9.030913] pc : irq_set_irq_wake+0xf4/0x158 [ 9.030917] lr : irq_set_irq_wake+0xf4/0x158 [ 9.030921] sp : ffff80001240bb00 [ 9.030923] x29: ffff80001240bb00 x28: ffff00000652d580 x27: 0000000000000000 [ 9.030929] x26: ffff0000065d0940 x25: ffff0000065d0000 x24: ffff800011462000 [ 9.030935] x23: 000000000000000e x22: 0000000000000000 x21: 00000000ffffffea [ 9.030940] x20: ffff8000114c1000 x19: ffff000003a04400 x18: ffffffffffffffff [ 9.030946] x17: 0000000000000000 x16: 0000000000000000 x15: ffff8000114c1c68 [ 9.030951] x14: 00000000000001f4 x13: ffff80001240b7c0 x12: 00000000ffffffea [ 9.030956] x11: ffff80001195d220 x10: ffff8000119451e0 x9 : ffff800011945238 [ 9.030962] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000000001 [ 9.030968] x5 : ffff0000b73ba768 x4 : 0000000000000000 x3 : 0000000000000027 [ 9.030973] x2 : 0000000000000023 x1 : 01a8c2b33db43a00 x0 : 0000000000000000 [ 9.030979] Call trace: [ 9.030981] irq_set_irq_wake+0xf4/0x158 [ 9.030985] stmmac_set_wol+0x1f8/0x210 [ 9.030990] dev_ethtool+0x3dc/0x1fa0 [ 9.030997] dev_ioctl+0x29c/0x3a8 [ 9.031001] sock_do_ioctl+0x114/0x2b8 [ 9.031006] sock_ioctl+0x3c8/0x4a0 [ 9.031009] __arm64_sys_ioctl+0xac/0xf0 [ 9.031014] invoke_syscall+0x44/0x100 [ 9.031020] el0_svc_common+0x64/0xf8 [ 9.031023] do_el0_svc+0x28/0x90 [ 9.031027] el0_svc+0x24/0x38 [ 9.031031] el0t_64_sync_handler+0x90/0xb8 [ 9.031035] el0t_64_sync+0x178/0x17c [ 9.031039] ---[ end trace 251213c5153922c1 ]--- Signed-off-by: Dongjin Kim <tobetter@gmail.com> Change-Id: I6850ca7c1ebf62f26a73f5491baaf8abfc89edf9
paralin
pushed a commit
to paralin/linux
that referenced
this pull request
Mar 29, 2022
[ 9.030792] ------------[ cut here ]------------ [ 9.030794] Unbalanced IRQ 14 wake disable [ 9.030802] WARNING: CPU: 3 PID: 1234 at kernel/irq/manage.c:901 irq_set_irq_wake+0xf4/0x158 [ 9.030815] Modules linked in: rfkill dm_multipath dm_mod dax snd_soc_hdmi_codec dw_hdmi_i2s_audio sg uas meson_vdec(C) v4l2_mem2mem videobuf2_dma_contig videobuf2_v4l2 videobuf2_memops rtc_pcf8563 panfrost videobuf2_common gpu_sched meson_dw_hdmi snd_soc_meson_g12a_tohdmitx videodev meson_rng ir_nec_decoder snd_soc_meson_axg_sound_card snd_soc_meson_g12a_toacodec snd_soc_meson_card_utils dw_hdmi mc meson_drm rng_core snd_soc_meson_codec_glue meson_ir snd_soc_meson_axg_spdifout snd_soc_meson_axg_tdmout axg_audio meson_canvas snd_soc_meson_axg_frddr sclk_div snd_soc_meson_axg_toddr clk_phase reset_meson_audio_arb snd_soc_meson_axg_tdmin snd_soc_meson_axg_fifo snd_soc_meson_t9015 meson_gxbb_wdt snd_soc_meson_axg_tdm_interface snd_soc_meson_axg_tdm_formatter snd_soc_simple_amplifier snd_soc_spdif_tx pwm_fan sch_fq_codel fuse ip_tables x_tables [ 9.030902] CPU: 3 PID: 1234 Comm: NetworkManager Tainted: G C 5.14.9+ hardkernel#53 [ 9.030906] Hardware name: Hardkernel ODROID-N2 (DT) [ 9.030909] pstate: 400000c5 (nZcv daIF -PAN -UAO -TCO BTYPE=--) [ 9.030913] pc : irq_set_irq_wake+0xf4/0x158 [ 9.030917] lr : irq_set_irq_wake+0xf4/0x158 [ 9.030921] sp : ffff80001240bb00 [ 9.030923] x29: ffff80001240bb00 x28: ffff00000652d580 x27: 0000000000000000 [ 9.030929] x26: ffff0000065d0940 x25: ffff0000065d0000 x24: ffff800011462000 [ 9.030935] x23: 000000000000000e x22: 0000000000000000 x21: 00000000ffffffea [ 9.030940] x20: ffff8000114c1000 x19: ffff000003a04400 x18: ffffffffffffffff [ 9.030946] x17: 0000000000000000 x16: 0000000000000000 x15: ffff8000114c1c68 [ 9.030951] x14: 00000000000001f4 x13: ffff80001240b7c0 x12: 00000000ffffffea [ 9.030956] x11: ffff80001195d220 x10: ffff8000119451e0 x9 : ffff800011945238 [ 9.030962] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000000001 [ 9.030968] x5 : ffff0000b73ba768 x4 : 0000000000000000 x3 : 0000000000000027 [ 9.030973] x2 : 0000000000000023 x1 : 01a8c2b33db43a00 x0 : 0000000000000000 [ 9.030979] Call trace: [ 9.030981] irq_set_irq_wake+0xf4/0x158 [ 9.030985] stmmac_set_wol+0x1f8/0x210 [ 9.030990] dev_ethtool+0x3dc/0x1fa0 [ 9.030997] dev_ioctl+0x29c/0x3a8 [ 9.031001] sock_do_ioctl+0x114/0x2b8 [ 9.031006] sock_ioctl+0x3c8/0x4a0 [ 9.031009] __arm64_sys_ioctl+0xac/0xf0 [ 9.031014] invoke_syscall+0x44/0x100 [ 9.031020] el0_svc_common+0x64/0xf8 [ 9.031023] do_el0_svc+0x28/0x90 [ 9.031027] el0_svc+0x24/0x38 [ 9.031031] el0t_64_sync_handler+0x90/0xb8 [ 9.031035] el0t_64_sync+0x178/0x17c [ 9.031039] ---[ end trace 251213c5153922c1 ]--- Signed-off-by: Dongjin Kim <tobetter@gmail.com> Change-Id: I6850ca7c1ebf62f26a73f5491baaf8abfc89edf9
Dangku
pushed a commit
to Dangku/amlogic-linux
that referenced
this pull request
Apr 12, 2022
VIM3: WOL: Solve Wol not effective
mdrjr
pushed a commit
that referenced
this pull request
Aug 7, 2024
[ Upstream commit 4a95449 ] The per cpu variable cpu_number1 is passed to xlnx_event_handler as argument "dev_id", but it is not used in this function. So drop the initialization of this variable and rename it to dummy_cpu_number. This patch is to fix the following call trace when the kernel option CONFIG_DEBUG_ATOMIC_SLEEP is enabled: BUG: sleeping function called from invalid context at include/linux/sched/mm.h:274 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0 preempt_count: 1, expected: 0 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.0 #53 Hardware name: Xilinx Versal vmk180 Eval board rev1.1 (QSPI) (DT) Call trace: dump_backtrace+0xd0/0xe0 show_stack+0x18/0x40 dump_stack_lvl+0x7c/0xa0 dump_stack+0x18/0x34 __might_resched+0x10c/0x140 __might_sleep+0x4c/0xa0 __kmem_cache_alloc_node+0xf4/0x168 kmalloc_trace+0x28/0x38 __request_percpu_irq+0x74/0x138 xlnx_event_manager_probe+0xf8/0x298 platform_probe+0x68/0xd8 Fixes: daed80e ("soc: xilinx: Fix for call trace due to the usage of smp_processor_id()") Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com> Link: https://lore.kernel.org/r/20240408110610.15676-1-jay.buddhabhatti@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
I m very pleased with the current fan driver, but unfortunately my fan needs a little bit more power than the 'duty' of the odroid will provide in the lower current regions. Thus I have expanded the driver to include a 'start_duty' entity, which is very similar to 'start_temp'.
What it actually does is to check whether the duty is below this threshold and in case it is, it will set duty up to this threshold. That means in case the driver wants the fan to work, it does not start with zero, but with the threshold value. Standard would be zero and thus there is no change in behavior. I have also put a line into the new 'start_temp' check, as the 'duty' value didn't get set to zero, when the 'start_temp' threshold kicked in. So what happened was that the 'start_temp' routine set duty to zero, but if you did a 'cat pwm_duty' it still reported the actual calculated threshold. This is odd behavior in my opinion.
I'd be happy if this gets tested and introduced to mainline. Any suggestions where to post this in the forums, mdrjr?
(Please be nice to me, I am not a coder)