Skip to content

Commit

Permalink
新增sunlogin_plug.sh：一键控制向日葵开机插座：开关电源、获取功耗等...
Browse files Browse the repository at this point in the history
  • Loading branch information
@hexiyou
hexiyou committed Jan 29, 2023
1 parent 21914ce commit f665da9
Showing 1 changed file with 219 additions and 0 deletions.
219 changes: 219 additions & 0 deletions sunlogin_plug.sh
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,219 @@
#!/bin/sh
#一键控制向日葵开机智能插座
#博客文章介绍：https://www.cnblogs.com/cnhack/p/17073052.html

SCRIPTPATH="$(dirname $0)"

requestTimeOut=3 #请求超时时间（单位：秒）

controlHostURL="http://192.168.1.105:6767" #发送的主机地址，可抓包获取，也可以指定插座联网的局域网IP地址，端口通常为6767
controlTime="01270152" #接收端需要的参数time，可抓包获取
controlKey="xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" #接收端需要的参数key，可抓包获取


statusUrl="${controlHostURL}/plug?_api=get_plug_status&index=0&time=${controlTime}&key=${controlKey}"
cntdownUrl="${controlHostURL}/plug?_api=plug_cntdown_get&time=${controlTime}&key=${controlKey}&index=0"
checkVersionUrl="${controlHostURL}/plug?key=${controlKey}&_api=get_plug_version&time=${controlTime}"
electricUrl="${controlHostURL}/plug?key=${controlKey}&_api=get_plug_electric&time=${controlTime}"
powerOnUrl="${controlHostURL}/plug?_api=set_plug_status&index=0&time=${controlTime}&key=${controlKey}&status=1"
powerOffUrl="${controlHostURL}/plug?_api=set_plug_status&index=0&time=${controlTime}&key=${controlKey}&status=0"

_sendRequest() {
local url="$1"
local responseData=$(curl -sSf --connect-timeout $requestTimeOut "$url" 2>/dev/null)
[ ! -z "$responseData" ] && echo "$responseData" || echo "{}"
}

#远端返回错误代码时调用（即result!=0）,非请求过程本身的错误
responseInvolid() {
local msg="【失败】：请求失败，请检查key是否已过期！"
echo "$msg"
cat >>$SCRIPTPATH/sunlogin-error.log<<<"[$(date +'%Y%m%d %H:%M:%S')] ${msg}"
#exit 255
return 255
}

appendErrorLog() {
local logFile="$SCRIPTPATH/sunlogin-error.log"
echo "$*"
cat >>$logFile<<<"[$(date +'%Y-%m-%d %H:%M:%S')] appendErrorLog：$*"
}

getPlugStatus() {
local json=$(_sendRequest "$statusUrl")
local status=$(echo "$json"|jq -r '.result' 2>/dev/null)
if [ -z "$status" -o "$status" = "null" ];then
appendErrorLog "【请求错误】：请求的地址无效，请检查被控主机配置是否正确，并确保被控设备已接入网络！"
return 99
elif [ $status -ne 0 ];then
responseInvolid && return
fi
local plugStatus=$(echo "$json"|jq '.response[]|.status')
if [[ "${1,,}" == "--flag" ]];then #仅返回状态标志：1->开关开启; 2->开关关闭
echo "$plugStatus"
else #返回可读的信息提示文本
if [ $plugStatus -eq 1 ];then
echo "【开启】电源开关处在开启状态！"
elif [];then
echo "【关闭】电源开关处在关闭状态！"
else
echo "【错误】开关状态未知！"
fi
fi
}

getPlugVersion() {
#获取插座固件版本信息
local json=$(_sendRequest "$checkVersionUrl")
local status=$(echo "$json"|jq -r '.result' 2>/dev/null)
if [ -z "$status" -o "$status" = "null" ];then
appendErrorLog "【请求错误】：请求的地址无效，请检查被控主机配置是否正确，并确保被控设备已接入网络！"
return 99
elif [ $status -ne 0 ];then
responseInvolid && return
fi
echo "$json"
}

getPlugPower() {
#获取插座当前的耗电功率！
local json=$(_sendRequest "$electricUrl")
local status=$(echo "$json"|jq -r '.result' 2>/dev/null)
if [ -z "$status" -o "$status" = "null" ];then
appendErrorLog "【请求错误】：请求的地址无效，请检查被控主机配置是否正确，并确保被控设备已接入网络！"
return 99
elif [ $status -ne 0 ];then
responseInvolid && return
fi
if [[ "${1,,}" == "--raw" ]];then #返回原始JSON数据
echo "$json"
else #返回可读的信息提示文本
local power=$(echo "$json"|jq -r '.power') #当前电功率
local current=$(echo "$json"|jq -r '.curr') #当前电流
local volume=$(echo "$json"|jq -r '.vol') #当前电量
printf "【耗电】当前电功率：%s W/h，电流：%s mA，电量：%s \n" $(echo "scale=2;$power/1000"|bc) $(echo "scale=2;$current/1000"|bc) $volume
fi

}

getPlugOpenCount() {
#获取插座今日开启次数
#注：此接口功能待定（暂时不知道是干嘛用的...）
local json=$(_sendRequest "$cntdownUrl")
local status=$(echo "$json"|jq -r '.result' 2>/dev/null)
if [ -z "$status" -o "$status" = "null" ];then
appendErrorLog "【请求错误】：请求的地址无效，请检查被控主机配置是否正确，并确保被控设备已接入网络！"
return 99
elif [ $status -ne 0 ];then
responseInvolid && return
fi
if [[ "${1,,}" == "--raw" ]];then #返回原始JSON数据
echo "$json"
else #返回可读的信息提示文本
#echo "TODO..."
echo "$json"
fi
}

getPlugPowerTime() {
#获取插座今日通电时长！
local url="https://sl-api.oray.com/smartplugs/xxxxxxxxxxxx/electric?date=2023-1-27&r=0.39320349774540664" #注意此URL可通过抓包网页控制面板获取
local json=$(_sendRequest "$url")
echo "$json"
}

powerOnPlug() {
#开启插座
local json=$(_sendRequest "$powerOnUrl")
local status=$(echo "$json"|jq -r '.result' 2>/dev/null)
if [ -z "$status" -o "$status" = "null" ];then
appendErrorLog "【请求错误】：请求的地址无效，请检查被控主机配置是否正确，并确保被控设备已接入网络！"
return 99
elif [ $status -ne 0 ];then
responseInvolid && return
fi
if [[ "${1,,}" == "--raw" ]];then #返回原始JSON数据
echo "$json"
else #返回可读的信息提示文本
local setStatus=$(echo "$json"|jq -r '.result' 2>/dev/null||echo "1")
[ "$setStatus" = "0" ] && echo "【成功】开启插座成功！" || echo "【失败】开启插座失败！"
fi

}

powerOffPlug() {
#关闭插座
local json=$(_sendRequest "$powerOffUrl")
local status=$(echo "$json"|jq -r '.result' 2>/dev/null)
if [ -z "$status" -o "$status" = "null" ];then
appendErrorLog "【请求错误】：请求的地址无效，请检查被控主机配置是否正确，并确保被控设备已接入网络！"
return 99
elif [ $status -ne 0 ];then
responseInvolid && return
fi
if [[ "${1,,}" == "--raw" ]];then #返回原始JSON数据
echo "$json"
else #返回可读的信息提示文本
local setStatus=$(echo "$json"|jq -r '.result' 2>/dev/null||echo "1")
[ "$setStatus" = "0" ] && echo "【成功】关闭插座成功！" || echo "【失败】关闭插座失败！"
fi

}

powerRebootPlug() {
#重开插座（关闭插座后再次开启，中间间隔30秒）
powerOffPlug
echo "延时等待中..."
sleep 30
powerOnPlug
}


#——————————————————————————————————————————————————————————————
#主逻辑开始：功能函数调用：

#getPlugStatus #获取插座开关所处状态
#getPlugOpenCount
#getPlugPower #获取插座当前功率
#powerOnPlug #开启插座
#powerOffPlug #关闭插座
#powerRebootPlug #重启插座

case "${1,,}" in
"on")
echo "开启插座..."
powerOnPlug
;;
"off")
echo "关闭插座..."
powerOffPlug
;;
"reboot")
echo "重启插座电源..."
powerRebootPlug
;;
"status")
echo "获取插座开关状态..."
getPlugStatus
;;
"version")
echo "获取插座固件版本..."
getPlugVersion
;;
"power")
echo "获取插座耗电功耗..."
getPlugPower
;;
"count")
echo "获取插座开关机次数..."
getPlugOpenCount
;;
"time")
echo "获取插座今日使用时长..."
getPlugPowerTime
;;
*)
:
#echo "Do Nothing"
;;
esac

0 comments on commit f665da9

Please sign in to comment.