Move non-assignment code to post_rules.mk (qmk#14207)

* 40percentclub/ut47: move non-assignment code to post_rules.mk

* converter/palm_usb: move non-assignment code to post_rules.mk

* converter/sun_usb: move non-assignment code to post_rules.mk

* dm9records/ergoinu: move non-assignment code to post_rules.mk

* ergotaco: move non-assignment code to post_rules.mk

* handwired/symmetric70_proto: move non-assignment code to post_rules.mk

* hhkb/ansi: move non-assignment code to post_rules.mk

* hhkb/jp: move non-assignment code to post_rules.mk

* lfkeyboards/lfk78: move non-assignment code to post_rules.mk

* lfkeyboards/lfk87: move non-assignment code to post_rules.mk

* lfkeyboards/lfkpad: move non-assignment code to post_rules.mk

* lfkeyboards/mini1800: move non-assignment code to post_rules.mk

* manta60: move non-assignment code to post_rules.mk

* mschwingen/modelm: move non-assignment code to post_rules.mk

* newgame40: move non-assignment code to post_rules.mk

* numatreus: move non-assignment code to post_rules.mk

* rgbkb/zen: move non-assignment code to post_rules.mk

* rgbkb/zen/rev2: move non-assignment code to post_rules.mk

* Revert "handwired/symmetric70_proto: move non-assignment code to post_rules.mk"

This reverts commit cffaf00.

keyboards/40percentclub/ut47/post_rules.mk

@@ -0,0 +1,4 @@
+ifeq ($(strip $(LED_ENABLE)), yes)
+  OPT_DEFS += -DLED_ENABLE
+  SRC += led.c
+endif

keyboards/40percentclub/ut47/rules.mk

@@ -24,8 +24,3 @@ AUDIO_ENABLE = no           # Audio output on port C6
 # custom matrix setup
 CUSTOM_MATRIX = yes
 SRC += matrix.c protocol/serial_uart.c
-
-ifeq ($(strip $(LED_ENABLE)), yes)
-  OPT_DEFS += -DLED_ENABLE
-  SRC += led.c
-endif

keyboards/converter/palm_usb/post_rules.mk

@@ -0,0 +1,7 @@
+ifdef HARDWARE_SERIAL
+  # Untested with palm_usb
+  SRC += protocol/serial_uart.c
+  OPT_DEFS += -DHARDWARE_SERIAL
+else
+  SRC += protocol/serial_soft.c
+endif

keyboards/converter/palm_usb/rules.mk

@@ -25,12 +25,5 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 CUSTOM_MATRIX = yes
 
 SRC += matrix.c
-ifdef HARDWARE_SERIAL
-  # Untested with palm_usb
-  SRC += protocol/serial_uart.c
-  OPT_DEFS += -DHARDWARE_SERIAL
-else
-  SRC += protocol/serial_soft.c
-endif
 
 DEFAULT_FOLDER = converter/palm_usb/stowaway

keyboards/converter/sun_usb/post_rules.mk

@@ -0,0 +1,6 @@
+ifdef HARDWARE_SERIAL
+  SRC += protocol/serial_uart.c
+  OPT_DEFS += -DHARDWARE_SERIAL
+else
+  SRC += protocol/serial_soft.c
+endif

keyboards/converter/sun_usb/rules.mk

@@ -25,11 +25,5 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 CUSTOM_MATRIX = yes
 
 SRC += matrix.c led.c
-ifdef HARDWARE_SERIAL
-  SRC += protocol/serial_uart.c
-  OPT_DEFS += -DHARDWARE_SERIAL
-else
-  SRC += protocol/serial_soft.c
-endif
 
 DEFAULT_FOLDER = converter/sun_usb/type5

keyboards/dm9records/ergoinu/post_rules.mk

@@ -0,0 +1,9 @@
+ifneq ($(strip $(ERGOINU)),)
+  ifeq ($(findstring promicroled, $(ERGOINU)), promicroled)
+    DISABLE_PROMICRO_LEDs = no
+  endif
+endif
+
+ifeq ($(strip $(DISABLE_PROMICRO_LEDs)), yes)
+  OPT_DEFS += -DDISABLE_PROMICRO_LEDs
+endif

keyboards/dm9records/ergoinu/rules.mk

@@ -29,13 +29,3 @@ SRC += matrix.c serial.c split_util.c
 
 # ergoinu configs
 DISABLE_PROMICRO_LEDs = yes
-
-ifneq ($(strip $(ERGOINU)),)
-  ifeq ($(findstring promicroled, $(ERGOINU)), promicroled)
-    DISABLE_PROMICRO_LEDs = no
-  endif
-endif
-
-ifeq ($(strip $(DISABLE_PROMICRO_LEDs)), yes)
-  OPT_DEFS += -DDISABLE_PROMICRO_LEDs
-endif

keyboards/ergotaco/post_rules.mk

@@ -0,0 +1,8 @@
+
+# A bunch of stuff that you shouldn't touch unless you
+# know what you're doing.
+#
+# No touchy, capiche?
+ifeq ($(strip $(DEBUG_MATRIX)), yes)
+    OPT_DEFS += -DDEBUG_MATRIX
+endif

keyboards/ergotaco/rules.mk

@@ -14,6 +14,3 @@ COMMAND_ENABLE		= yes
 #
 # No touchy, capiche?
 SRC += matrix.c i2c_master.c
-ifeq ($(strip $(DEBUG_MATRIX)), yes)
-    OPT_DEFS += -DDEBUG_MATRIX
-endif

keyboards/hhkb/ansi/post_rules.mk

@@ -0,0 +1,18 @@
+ifeq ($(strip $(HHKB_RN42_ENABLE)), yes)
+
+OPT_DEFS += -DHHKB_RN42_ENABLE
+
+# Support for the RN42 Bluetooth module. This is the BT module in Hasu's BT
+# HHKB Alt controller.
+RN42_DIR = ../rn42
+
+SRC +=  serial_uart.c \
+	../rn42/suart.S \
+	../rn42/rn42.c \
+	../rn42/rn42_task.c \
+	../rn42/battery.c \
+	../rn42/main.c
+
+VPATH += $(RN42_DIR)
+
+endif

keyboards/hhkb/ansi/rules.mk

@@ -33,26 +33,6 @@ MIDI_ENABLE = no              # MIDI support
 # project specific files
 SRC = matrix.c
 
-ifeq ($(strip $(HHKB_RN42_ENABLE)), yes)
-
-OPT_DEFS += -DHHKB_RN42_ENABLE
-
-# Support for the RN42 Bluetooth module. This is the BT module in Hasu's BT
-# HHKB Alt controller.
-RN42_DIR = ../rn42
-
-SRC +=  serial_uart.c \
-	../rn42/suart.S \
-	../rn42/rn42.c \
-	../rn42/rn42_task.c \
-	../rn42/battery.c \
-	../rn42/main.c
-
-VPATH += $(RN42_DIR)
-
-endif
-
-
 # debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION
 # debug-on: all
 

keyboards/hhkb/jp/post_rules.mk

@@ -0,0 +1,18 @@
+ifeq ($(strip $(HHKB_RN42_ENABLE)), yes)
+
+OPT_DEFS += -DHHKB_RN42_ENABLE
+
+# Support for the RN42 Bluetooth module. This is the BT module in Hasu's BT
+# HHKB Alt controller.
+RN42_DIR = ../rn42
+
+SRC +=  serial_uart.c \
+	../rn42/suart.S \
+	../rn42/rn42.c \
+	../rn42/rn42_task.c \
+	../rn42/battery.c \
+	../rn42/main.c
+
+VPATH += $(RN42_DIR)
+
+endif

keyboards/hhkb/jp/rules.mk

@@ -33,26 +33,6 @@ MIDI_ENABLE = no              # MIDI support
 # project specific files
 SRC = matrix.c
 
-ifeq ($(strip $(HHKB_RN42_ENABLE)), yes)
-
-OPT_DEFS += -DHHKB_RN42_ENABLE
-
-# Support for the RN42 Bluetooth module. This is the BT module in Hasu's BT
-# HHKB Alt controller.
-RN42_DIR = ../rn42
-
-SRC +=  serial_uart.c \
-	../rn42/suart.S \
-	../rn42/rn42.c \
-	../rn42/rn42_task.c \
-	../rn42/battery.c \
-	../rn42/main.c
-
-VPATH += $(RN42_DIR)
-
-endif
-
-
 # debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION
 # debug-on: all
 

keyboards/lfkeyboards/lfk78/post_rules.mk

@@ -0,0 +1,14 @@
+# Extra source files for IS3731 lighting
+SRC += TWIlib.c issi.c lighting.c
+
+ifeq ($(strip $(ISSI_ENABLE)), yes)
+    TMK_COMMON_DEFS += -DISSI_ENABLE
+endif
+
+ifeq ($(strip $(WATCHDOG_ENABLE)), yes)
+    TMK_COMMON_DEFS += -DWATCHDOG_ENABLE
+endif
+
+ifeq ($(strip $(CAPSLOCK_LED)), yes)
+    TMK_COMMON_DEFS += -DCAPSLOCK_LED
+endif

keyboards/lfkeyboards/lfk78/rules.mk

@@ -24,19 +24,4 @@ ISSI_ENABLE = yes               # If the I2C pullup resistors aren't install thi
 WATCHDOG_ENABLE = no            # Resets keyboard if matrix_scan isn't run every 250ms
 CAPSLOCK_LED = no              # Toggle back light LED of Caps Lock
 
-# Extra source files for IS3731 lighting
-SRC = TWIlib.c issi.c lighting.c
-
-ifeq ($(strip $(ISSI_ENABLE)), yes)
-    TMK_COMMON_DEFS += -DISSI_ENABLE
-endif
-
-ifeq ($(strip $(WATCHDOG_ENABLE)), yes)
-    TMK_COMMON_DEFS += -DWATCHDOG_ENABLE
-endif
-
-ifeq ($(strip $(CAPSLOCK_LED)), yes)
-    TMK_COMMON_DEFS += -DCAPSLOCK_LED
-endif
-
 DEFAULT_FOLDER = lfkeyboards/lfk78/revj

keyboards/lfkeyboards/lfk87/post_rules.mk

@@ -0,0 +1,13 @@
+ifeq ($(LFK_REV), A)
+    MCU = at90usb1286
+else
+    MCU = at90usb646
+endif
+
+ifeq ($(strip $(ISSI_ENABLE)), yes)
+    OPT_DEFS += -DISSI_ENABLE
+endif
+
+ifeq ($(strip $(WATCHDOG_ENABLE)), yes)
+    OPT_DEFS += -DWATCHDOG_ENABLE
+endif

keyboards/lfkeyboards/lfk87/rules.mk

@@ -6,11 +6,6 @@
 #
 LFK_REV = C
 
-ifeq ($(LFK_REV), A)
-    MCU = at90usb1286
-else
-    MCU = at90usb646
-endif
 BOOTLOADER = atmel-dfu
 OPT_DEFS += -DLFK_TKL_REV_$(LFK_REV)
 
@@ -42,13 +37,3 @@ TAP_DANCE_ENABLE = no
 
 ISSI_ENABLE = yes			# If the I2C pullup resistors aren't install this must be disabled
 WATCHDOG_ENABLE = no		# Resets keyboard if matrix_scan isn't run every 250ms
-
-
-
-ifeq ($(strip $(ISSI_ENABLE)), yes)
-    OPT_DEFS += -DISSI_ENABLE
-endif
-
-ifeq ($(strip $(WATCHDOG_ENABLE)), yes)
-    OPT_DEFS += -DWATCHDOG_ENABLE
-endif

keyboards/lfkeyboards/lfkpad/post_rules.mk

@@ -0,0 +1,7 @@
+ifeq ($(strip $(ISSI_ENABLE)), yes)
+    TMK_COMMON_DEFS += -DISSI_ENABLE
+endif
+
+ifeq ($(strip $(WATCHDOG_ENABLE)), yes)
+    TMK_COMMON_DEFS += -DWATCHDOG_ENABLE
+endif

keyboards/lfkeyboards/lfkpad/rules.mk

@@ -29,12 +29,4 @@ WATCHDOG_ENABLE = no         # Resets keyboard if matrix_scan() isn't run every
 
 SRC = TWIlib.c issi.c lighting.c
 
-ifeq ($(strip $(ISSI_ENABLE)), yes)
-    TMK_COMMON_DEFS += -DISSI_ENABLE
-endif
-
-ifeq ($(strip $(WATCHDOG_ENABLE)), yes)
-    TMK_COMMON_DEFS += -DWATCHDOG_ENABLE
-endif
-
 LAYOUTS = numpad_6x4

keyboards/lfkeyboards/mini1800/post_rules.mk

@@ -0,0 +1,9 @@
+ifeq ($(LFK_REV), A)
+    MCU = at90usb1286
+else
+    MCU = at90usb646
+endif
+
+ifeq ($(strip $(ISSI_ENABLE)), yes)
+    # TMK_COMMON_DEFS += -DISSI_ENABLE
+endif

keyboards/lfkeyboards/mini1800/rules.mk

@@ -7,21 +7,12 @@
 # Set to A or C
 LFK_REV = C
 
-ifeq ($(LFK_REV), A)
-    MCU = at90usb1286
-else
-    MCU = at90usb646
-endif
 BOOTLOADER = atmel-dfu
 OPT_DEFS += -DLFK_TKL_REV_$(LFK_REV)
 
 # Extra source files for IS3731 lighting
 SRC = TWIlib.c issi.c lighting.c
 
-ifeq ($(strip $(ISSI_ENABLE)), yes)
-    # TMK_COMMON_DEFS += -DISSI_ENABLE
-endif
-
 # Build Options
 #   change yes to no to disable
 #

keyboards/manta60/post_rules.mk

@@ -0,0 +1,3 @@
+ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
+    OPT_DEFS += -DIOS_DEVICE_ENABLE
+endif

keyboards/manta60/rules.mk

@@ -23,7 +23,3 @@ AUDIO_ENABLE = no           # Audio output
 SPLIT_KEYBOARD = yes
 
 IOS_DEVICE_ENABLE = no      # connect to IOS device (iPad, iPhone)
-
-ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
-    OPT_DEFS += -DIOS_DEVICE_ENABLE
-endif

keyboards/mschwingen/modelm/post_rules.mk

@@ -0,0 +1,3 @@
+ifeq ($(strip $(UART_DEBUG)), yes)
+    OPT_DEFS += -DUART_DEBUG
+endif

keyboards/mschwingen/modelm/rules.mk

@@ -36,8 +36,4 @@ OPT_DEFS += -DSLEEP_LED_ENABLE # we need our own sleep callbacks to turn of WS28
 
 LTO_ENABLE = yes
 
-ifeq ($(strip $(UART_DEBUG)), yes)
-    OPT_DEFS += -DUART_DEBUG
-endif
-
 DEFAULT_FOLDER = mschwingen/modelm/led_wired

keyboards/newgame40/post_rules.mk

@@ -0,0 +1,3 @@
+ifeq ($(strip $(IOS_DEVICE_ENABLE )), yes)
+    OPT_DEFS += -DIOS_DEVICE_ENABLE 
+endif

keyboards/newgame40/rules.mk

@@ -21,10 +21,6 @@ BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.
 IOS_DEVICE_ENABLE = no     # connect to IOS Device
 
-  ifeq ($(strip $(IOS_DEVICE_ENABLE )), yes)
-    OPT_DEFS += -DIOS_DEVICE_ENABLE 
-  endif
-
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 

keyboards/numatreus/post_rules.mk

@@ -0,0 +1,3 @@
+ifeq ($(strip $(LED_ANIMATIONS)), yes)
+    OPT_DEFS += -DLED_ANIMATIONS
+endif

keyboards/numatreus/rules.mk

@@ -19,9 +19,5 @@ UNICODE_ENABLE = yes         # Unicode
 RGBLIGHT_ENABLE = no
 LED_ANIMATIONS = no
 
-ifeq ($(strip $(LED_ANIMATIONS)), yes)
-    OPT_DEFS += -DLED_ANIMATIONS
-endif
-
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend

keyboards/rgbkb/zen/post_rules.mk

@@ -0,0 +1,14 @@
+ifeq ($(strip $(CTPC)), yes)
+  CONVERT_TO_PROTON_C=yes
+endif
+
+ifeq ($(strip $(CONVERT_TO_PROTON_C)), yes)
+  SPLIT_KEYBOARD = no       # currently unsupported on ARM
+  RGBLIGHT_ENABLE = no      # currently unsupported on ARM
+
+  EXTRAFLAGS += -DUSE_PROTON_C
+else
+  # Currently moved to Pro Micro only section because of lack of Proton-C support
+  SPLIT_KEYBOARD = yes
+  RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.
+endif

keyboards/rgbkb/zen/rev2/post_rules.mk

@@ -0,0 +1,5 @@
+# Setup so that OLED can be turned on/off easily
+ifeq ($(strip $(OLED_ENABLE)), yes)
+  # Custom local font file
+  OPT_DEFS += -DOLED_FONT_H=\"common/glcdfont.c\"
+endif

keyboards/rgbkb/zen/rev2/rules.mk

@@ -1,9 +1,3 @@
 ENCODER_ENABLE = yes
 
 OLED_ENABLE = no
-
-# Setup so that OLED can be turned on/off easily
-ifeq ($(strip $(OLED_ENABLE)), yes)
-  # Custom local font file
-  OPT_DEFS += -DOLED_FONT_H=\"common/glcdfont.c\"
-endif